Public Works Department Tender

Sinking of 4.50 m external diameter well (other than pneumatic method of sinking) through all type of Strata namely sandy Soil, clayed soil as shown againts each case complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level upto 19.90 m depth including required all machinary, other devices, all labour, T&P etc reqd. for proper completion of the work including dewatering if any as per MORT & H Speci.-12.12(Section 1200) up to 3.00 m depth (Including Labour cess & GST will paid Extra as applicable)

Sinking of 4.50 m external diameter well (other than pneumatic method of sinking) through all type of Strata namely sandy Soil, clayed soil as shown againts each case complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level upto 19.90 m depth including required all machinary, other devices, all labour, T&P etc reqd. for proper completion of the work including dewatering if any as per MORT & H Speci.-12.1Section 1200)AIII Beyond 3.00m up to 10.00m depth (Including Labour cess & GST will paid Extra as applicable)

Sinking of 4.50 m external diameter well (other than pneumatic method of sinking) through all type of Strata namely sandy Soil, clayed soil as shown againts each case complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level upto 19.90 m depth including required all machinary, other devices, all labour, T&P etc reqd. for proper completion of the work including dewatering if any as per MORT & H Speci.-12.12(Section 1200)A III Beyond 10.00m up to 20.00m depth (Including Labour cess & GST will paid Extra as applicable)

Reinforced Cement Concrete, in Well curb of M-25 Grade using batching plant & Manual placing complete as per Drawing and Technical Specification. including cost of grit, coarse sand from approved quarry, all labour, T&P etc reqd. for proper completion of the work.as per MORT & H Speci.-12.11 A (ii) 1200,1500 & 1700(Case II) (Including Labour cess & GST will paid Extra as applicable)

Reinforced Cement Concrete, in Well steining of M-30 Grade using batching plant & Concrete pump complete as per Drawing and Technical Specification. including cost grit and coarse sand from Dala quarry all labour, T&P etc reqd. for proper completion of the work, as per MORT & H Speci.-12.11 B (vii) Case I (Including Labour cess & GST will paid Extra as applicable)

Plain Cement Concrete, in Bottom Plug PCC Grade M-25 using batching plant & Concrete pump complete including cost grit and coarse sand from Dala quarry all labour, T&P etc reqd. for proper completion of the work, as per Drawing and Technical Specification.(12.11C)as per MORT & H Speci.-12.11 C (ii) Case I (Including Labour cess & GST will paid Extra as applicable)

Plain Cement Concrete, in Intermediate Plug PCC Grade M-20 using batching plant & Concrete pump complete including cost grit and coarse sand from Dala quarry all labour, T&P etc reqd. for proper completion of the work, as per Drawing and Technical Specification. (12.11D)as per MORT & H Speci.-12.11 D (i)Case I (Including Labour cess & GST will paid Extra as applicable)

Plain Cement Concrete, in Top Plug PCC Grade M-15 using batching plant & Concrete pump complete including cost grit and coarse sand from Dala quarry all labour, T&P etc reqd. for proper completion of the work, as per Drawing and Technical Specification. (12.11E)as per MORT & H Speci.-12.11 E (i) (Including Labour cess & GST will paid Extra as applicable)

Reinforced Cement Concrete, in Well cap of M-30 Grade using batching plant, Transit Mixer & Manual Plasing complete including cost grit and coarse sand from Dala quarry all labour, T&P etc reqd. for proper completion of the work, as per Drawing and Technical Specification.(12.11F)as per MORT & H Speci.-12.11 F (iii)Case II (Including Labour cess & GST will paid Extra as applicable)

Sand Filling in Wells complete including cost Sand from approved quarry all labour, T&P etc reqd. for proper completion of the work, as per Drawing and Technical Specifications.as per MORT & H Speci.-12.21-1207 (Including Labour cess & GST will paid Extra as applicable)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation including cost Steel etc reqd. for proper completion of the work, as per Drawing and Technical Specifications.as per MORT & H Speci.-12.42-1600 (Including Labour cess & GST will paid Extra as applicable)

Reinforced cement concrete in sub structure Abutment/Pier shaft and Cap of RCC Grade M-30 using batching plant, Transit Mixer & Concrete Pump including cost of grit, Sand from approved Quarry all material etc reqd. for proper completion of the work, as per drawing and Technical Specifications (13.5G)as per MORT & H Speci.-13.05G (Including Labour cess & GST will paid Extra as applicable)

Supplying, fitting and placing HYSD bar reinforcement in substructure of Abutment/Pier Cap/Shaft including cost of Steel, all labour etc. reqd. for proper completion of the work, as per drawing and Technical Specifications (13.6)as per MORT & H Speci.-13.06(1600 & 2200) (Including Labour cess & GST will paid Extra as applicable)

Furnishing and Placing Reinforced cement concrete in super structure (slab /Kerb) of RCC Grade M-25 using batching plant, Transit Mixer & Concrete Pump including cost of grit, Sand from approved Quarry all material etc reqd. for proper completion of the work, as per MORT & H Speci.-14.01 BCase II (Including Labour cess & GST will paid Extra as applicable)

Providing and laying Reinforced Cement concrete in wearing coat of RCC Grade M-30 using batching plant, Transit Mixer & Concrete Pump including reinforcement cost of grit, Sand from approved Quarry all material etc reqd. for proper completion of the work, as per MORT & H Speci.-14.01C (Including Labour cess & GST will paid Extra as applicable)

R.C.C. Work in Railing in Grade M-30 using batching plant, Transit Mixer & Concrete Pump including reinforcement cost of grit, Sand from approved Quarry all material etc reqd. for proper completion of the work, as per MORT & H Speci.-14.01C (Including Labour cess & GST will paid Extra as applicable)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in super structure Foundation including cost Steel etc reqd. for proper completion of the work, as per MORT & H Speci.-14.02-1600 (Including Labour cess & GST will paid Extra as applicable)

Drainage Spouts complete and also including all type of taxes but excluding cess as per MORT & H Speci.-14.09-2705 (Including Labour cess & GST will paid Extra as applicable)

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer /supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation as per MORT & H Speci.-14.21-2607 (Including Labour cess & GST will paid Extra as applicable)

Providing and Fixing of Neoporin alosmatric bearing etc. required for proper completion of the work.as per MORT & H Speci.-14.19-2605 (Including Labour cess & GST will paid Extra as applicable)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sum) CPWD No 13.47.1 for railingas (Including Labour cess & GST will paid Extra as applicable)

Construction of Embankment with approved material obtained from borrow pits with a lift upto 5.00 km, transporting to site, spreading, grading to required slope and compacting to meet requirment of 95% of Proctor Density as per MORT & H Specification Clause 3.16 (305) (Cartage Earth) (Including Labour cess & GST will paid Extra as applicable)

(CTSB) Providing, laying and spreading material on a prepared sub grade, adding OPC cement @ 2% by weight to be spread material manualy, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive stregth and to form a layer of sub base. (Including Labour cess & GST will paid Extra as applicable)

(CTB) Providing, laying and spreading material on a prepared sub base, OPC cement @ 4% by weight to the spread material manualy, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub base. (Including Labour cess & GST will paid Extra as applicable)

Providing and applying tack coat with Bitumen (VG-10) using bitumen pressure distributor @ 0.30 kg/sqm on the prepared bituminous surfaces as per Technical Specification Clause 503. (Including Labour cess & GST will paid Extra as applicable)

Providing laying and rolling of open-graded premix carpet of 20 mm thickness, composed of 13.2 mm to 5.6 mm aggregates and using Bitumen VG-10, to required line, grade and leval to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (Including Labour cess & GST will paid Extra as applicable)

Providing and laying seal coat type C, composed of as chipping of 6.7mm size passing 100% passing 9.5 mm sieve and retained on 2.36 mm sieve and VG-10 Bitumen, to seal the voids in a bitumenous surface, including its mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller, finished to required level, grades and cross fall, as per Technical Specification Clause 508.MORTH specification clause No. 509 complete in all respects. (Including Labour cess & GST will paid Extra as applicable)

Construction of Embankment with approved material obtained from borrow pits with a lift upto 5.00 km, transporting to site, spreading, grading to required slope and compacting to meet requirment of 95% of Proctor Density as per MORT & H Specification Clause 3.16 (305) (Cartage Earth) (Including Labour cess & GST will paid Extra as applicable) (For Patri)

Excavation of Foundation in ordinary soil (Ioam clay or sand) including lift upto 1.50 meter and lead up 30meter and including filling, watering and ramming of excavated earth into trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 meters from the foundation trenches. As per SI No 251 (Including Labour cess & GST will paid Extra as applicable)

Providing and laying Filter material underneath pitching in slopes using 40mm brick ballast complete as per drawing and Technical specification as per MORT & H Speci- 15.5 (2504) (Including Labour cess & GST will paid Extra as applicable)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications as per Morth Specification No 2504 & SI No 15.4 (Including Labour cess & GST will paid Extra as applicable)

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass bed as perIRC 35 inclduing cost of all materials , labour , Machinaries , T&P etc. requared for peoper completion of work i/c all other charges and taxes . The finishied surface to be level uniform and free from streks and holes as per MORTH specification no. 803 (Including Labour cess & GST will paid Extra as applicable)

Supplying and installation of delinators (road way indicators, hazard markers, object marker) 80-100 cm high above ground lavel , panted balck and white in 15 cm wide strips fitting with 80x100 mm rectangular or 75mm dia circular reflactorised panal at the top buried or pressed into the ground and conforming to IRC:79 and the drawing (Including Labour cess & GST will paid Extra as applicable)

Providing and faing of vectorised cautionary, mandatory and informatory sign as per IRC ST 2012 made of high intensity grade sheeting type-IV vide clause 801 3 Exed over sluminium sheeting 15 mm thick supported on a mad steel angle von post 75 mm x 75 mm x mm firmly fled to the ground means of property designed foundation with M 115 grade cement concrele 45 cm x 45 cm x om below ground level as per approved drawing cm 60 cm, 60 The Ratro reflective sheeting shall be tested certificate of having the sheeting tested for coefficient of n for a fratro reflection, daytime colour and luminance, ahvinkage, fexibility, aner removal, adhesion, impact resistance, specular gloss and fungus resistance years outdoor weathering and is having passed these tests shall be obtained from International/Govemmant Laboratory Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (0 4956-09) on ancial sccelerated weathering requirements from a reputed laboratory in India can be accepted provisionally, In such a situation, the Employer/Client, if so desices could seek for a performance guarantee which would be released after receipt of certificate meeting the requrament of tree years outdoor weathering of the sheeting as per IRC 67.2012. Legends, letters numerals and borders etc should be as per per MoRTH specification No-801.3.7. Proof of govemment report shall be uploaded while quating tender of the same in form 80 mm x 60 mm rectangular with diffin11a1,on plale (20cm X 60cm) . (Including Labour cess & GST will paid Extra as applicable)