Public Works Department Tender

Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification complete excluding GST. (Sl. No. 12.11 & MORT&H specifications 1200,1500 & 1700)Well CurbRCC M30 Grade

Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification complete excluding GST. (Sl. No. 12.11 & MORT&H specifications 1200,1500 & 1700)Well Steining. RCC M 30 Grade

Sinking of 5 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level complete excluding GST. (Sl. No. 12.12 & MORT&H specifications 1200). 6(i) 0 to 3 m

6(ii) 3 to 10 m

6(iii) 10 to 11 m

Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification complete excluding GST. (Sl. No. 12.11C & MORT&H specifications 1200,1500 & 1700)Bottom Plug PCC M 25 Grade

Sand Filling in Foundation Trenches as per Drawing & Technical Specification complete excluding GST. (Sl. No. 12.3 & MORT&H specifications 304)

Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification complete excluding GST. (Sl. No. 12.11 D & MORT&H specifications 1200,1500 & 1700)Intermediate Plug PCC M 15 Grade

Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification complete excluding GST. (Sl. No. 12.11F & MORT&H specifications 1200,1500 & 1700)RCC M30 Grade

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification complete excluding GST. (Sl. No. 14.10 & MORT&H specifications 2700)

Plain/Reinforced Cement Concrete in super structure complete as per Drawing and Technical Specifications complete excluding GST. (Sl. No. 12.8 & MORT&H specifications 1500,1700 & 2100)RCC Grade M25.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications complete excluding GST. (Sl. No. 12.40 & MORT&H specifications 1600)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications complete excluding GST. (Sl. No. 13.5 G (p) & MORT&H specifications 1200 & 1900)RCC Grade M30

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications complete excluding GST. (Sl. No. 12.5 H (p) & MORT&H specifications 1200 & 1900)RCC Grade M35

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications complete excluding GST. (Sl. No. 13.6 & MORT&H specifications 1600 & 2200)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications complete excluding GST. (Sl. No. 13.8 & MORT&H specifications 2706 & 2200)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification complete excluding GST. (Sl. No. 13.10 & MORT&H specifications 2200)

Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications complete excluding GST. (Sl. No. 13.14 & MORT&H specifications 2000 & 2200)

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specifications complete excluding GST. (For T-beam & slab) (Sl. No. 14.1 D MORT&H) RCC/PSC Grade M35

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications complete excluding GST. (Sl. No. 14.2 & MORT&H specifications 1600)

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation complete excluding GST. (Sl. No. 14.22 & MORT&H specifications 2607)

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications complete excluding GST. (Sl. No. 14.4 & MORT&H specifications 2702)

Drainage Spouts complete as per drawing and Technical specification complete excluding GST. (Sl. No. 14.9 & MORT&H specifications 2705)

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specifications complete excluding GST. (Sl. No. 14.11 & MORT&H specifications 1500,1600, 1700 & 2704)RCC Grade M 30

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction complete excluding GST. complete excluding GST. (Sl. No. 3.19 & MORT&H specifications 305.3.4)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 complete excluding GST. (Sl. No. 3.16 & MORT&H specifications 305)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 complete excluding GST. (Sl. No. 3.18 & MORT&H specifications 305)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 complete excluding GST. (Sl. No. 4.2 & MORT&H specifications 401)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete excluding GST. (Sl. No. 4.12 of MORT&H specifications 406)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means complete excluding GST. (Sl. No. 5.1 & MORT&H specifications 502)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom complete excluding GST. (Sl. No. 5.2 & MORT&H specifications 503)

Providing & laying Dense graded Bituminious macadam with 60-90 TPH batch HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder @ 4.5 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 507 Complete in all respects inculding all material complete excluding GST. (Sl. No. 5.6 & MORT&H specifications 507)

Providing & laying Bituminious Concrete with 60-90TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder @ 5.4 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 509 Complete in all respects inculding all material complete excluding GST. (Sl. No. 5.8 & MORT&H specifications 509)

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work complete excluding GST. (As pe SOR. Ch. No. 20, Item 763)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, VAT etc. all T&P/machine material and labour required for proper completion of work complete excluding GST. (As per SOR Ch. No. 27, New Item 5)

Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P/ machine material and labour required for proper completion of work. Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.complete excluding GST. (As per SOR. Ch. No. 27, New Item 10)

"Supplying and instalation of delinators (road way indicators, hazard markers, object marker) 80-100cm. High above ground level, painted black and white in 15cm. Wide strips, fitted with 80x100mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. with tri-color retro -refractive sheet. (15x3 cm) Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work.Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination complete excluding GST. (As per SOR. Ch. No. 27, New Item 10)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete excluding GST. Manual means. As per SOR.

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. complete excluding GST. Manual means. As per SOR.

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. complete excluding GST. (Sl. No. 11.6 & MORT&H specifications 700 & 1200)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification complete excluding GST. (Sl. No. 15.5 & MORT&H specifications 2504)

Flexible Apron :Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall complete excluding GST. (Sl. No. 15.11 & MORT&H specifications 2507.2)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications