Public Works Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date25 Jan 2025
Closing Date25 Feb 2025
Tender Amount₹ 20,10,13,086
Technical
Technical
Financial
Class Of Bidder
... View More
Category A
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using two alternative formulas: 1. Bidding Capacity = {[AxNxM]-B}
2. Bidding Capacity = {[AxNx2]-B} Where:
A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the last year at the rate of 10 percent a year) N = Number of years prescribed for completion of the works for which bids are invited M = 2.0 (in the first formula) or 2 (in the second formula, implied as "Nx2")
B = Value, at the current price level, of existing commitments and on-going works to be completed during the next 1.5 years (period of completion of the works for which bids are invited) Alternatively, the bid capacity can also be determined based on the completion of similar works with specific cost values:
- Three similar completed works each costing not less than Rs 804.05 Lac (40% of estimated cost)
- Two similar completed works each costing not less than Rs 1206.08 Lac (60% of estimated cost)
- One similar completed work each costing not less than Rs 1608.10 lac (80% of estimated cost) However, the exact estimated cost is not provided, making it difficult to calculate the exact bid capacity required.
Technical Capacity
... View More
The required prior work experience for the bidder is not explicitly stated in terms of years. However, certain conditions and criteria are mentioned, such as completing similar works with a value of not less than Rs 804.05 Lac (40% of estimated cost) in one of the following ways: - Three similar completed works each costing not less than Rs 804.05 Lac (40% of estimated cost)
- Two similar completed works each costing not less than Rs 1206.08 Lac (60% of estimated cost)
- One similar completed work each costing not less than Rs 1608.10 lac (80% of estimated cost). Additionally, the bidder should have had an average annual financial turnover of Rs. 804.05 Lac on construction works during the last five consecutive years, with a minimum average annual turnover worth 40% of the estimated cost. The bidder should not have incurred any loss in more than two years during the last five consecutive years. The bidder should also demonstrate access to liquid assets and/or credit facilities of not less than 10% of the value of the contract. The bidding capacity of the contractor should be equal to or more than the estimated cost of the work. The bidder should have experience in civil engineering construction work performed in the last five years, with a total value of work performed. The bidder should also provide information on work performed as a prime contractor or as a nominated subcontractor. Specific values and percentages of similar works completed mentioned are: - 40% of estimated cost, which is Rs 804.05 Lac
- 60% of estimated cost, which is Rs 1206.08 Lac
- 80% of estimated cost, which is Rs 1608.10 lac
- 10% of the value of the contract for liquid assets and/or credit facilities.
Costs
EMD
₹ 30,10,000Document Cost
₹ 2,725Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEBLY_997790_1Tender No
11097 /Bdn-Pbt(e-tender)-3/24-25 dt 26.12.24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
In all kind of soil upto 4.5 m to 6.0m. depth
10.54
470
4953.8
... More
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4092.87
139
568908.96
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1130.22
499
563979.78
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
478.58
1515
725054.29
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size)
2.99
5950
17790.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size)
2.24
5620
12588.8
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1167.12
4859
5671036.08
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor. With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.
3627.88
221
801761.04
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the
cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
2063.93
6781
13995509.33
... More
All works above plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
2432.2
7100
17268626.53
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
436.02
5088
2218476.61
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
448.27
293
131342.76
... More
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including cost of fuel if any.
448.27
104
46620
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
2201.88
6496
14303408.73
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
1515.64
801
1214025.55
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
6265.39
7694
48205904.45
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf.
555.93
1707
948972.51
... More
(b) Double leaf
28.8
1783
51350.4
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Kiln seasoned and chemically treated hollock wood
80.7
2567
207156.9
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading
32.85
670
22009.5
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
2
138
276
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
4
59
236
... More
Providing and fixing ISI marked oxidised M.S. handles
conforming to IS:4992 with necessary screws etc. complete : 125 mm
4
28
112
... More
Providing and fixing bright finished brass hanging type floor
door stopper with necessary screws, etc. complete
2
86
172
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
68.4
374
25581.6
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1586.4
69
109461.6
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
15518.62
123
1908790.26
... More
Z-Section steel windows (openable)
16409.94
91
1493304.54
... More
Angle iron door chaukhats 40*40*5
4032.45
93
375017.85
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand).
414.36
293
121406.43
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
13103.98
282
3695322.36
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
13210.61
245
3236599.33
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
4394.55
55
241700.05
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (FLOORING)
293.13
782
229225.25
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1003.34
904
907019.18
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
1372.51
534
732921.51
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm
nominal size stone aggregate
12.5
438
5475
... More
Cement plaster skirting up to 30 cm height, with cement mortar
1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 MM thick
3
472
1416
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
2717.75
1389
3774960.36
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
209.6
1679
351918.4
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
3941.43
1108
4367101.43
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
360.17
1157
416715.76
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.
225.72
3664
827045.77
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10
8180.32
121
989818.43
... More
Distempering with oil bound washable distemper of approved brand New work (two or more coats) over and including water thinnable priming coat
with cement primer
19046.68
132
2514161.87
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work.
4821.78
83
400207.32
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats
623.04
115
71649.9
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
27934.55
111
3100734.94
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
987.46
161
158981.8
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (Wood works).
1117.26
161
179878.86
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
10.67
1783
19025.49
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
40.55
440
17842.93
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65
2976.97
1201
3575343.02
... More
Construction of drain alongwith apron.
724.59
957
693430.72
... More
Providing & fixing stainless steel sliding door
bolts ISI marked complete. (a) 300mm x 16mm.
231
490
113190
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete
(a) 200 mm x 10mm
114
294
33516
... More
(b) 250 mm x 10mm
175
392
68600
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
112
196
21952
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 100 mm
4
196
784
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
56
193
10808
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
346
85
29410
... More
Providing & fixing glazing in Z-section, windows, doors, ventilators shutters and partitions etc with Glass Putty/beading etc completion : with float glass panes 4.0mm thick
551.12
759
418300.08
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
10535
138
1453830
... More
painting on Steel Truss over prime coat
301
161
48461
... More
S/F of Profile sheet Roofing approved by E-I-C
301
526
158326
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
7123.73
551
3925176.33
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
10.51
8161
85768.85
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement
without any pigment
212.5
1000
212495.1
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
567.71
279
158389.72
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string
1.5
601
901.5
... More
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
8017.78
733
5877033.03
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
4208.74
685
2882984.04
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
10558.55
600
6335129.02
... More
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
21
4828
101388
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
38
4648
176624
... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls
wherever required. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
48
1588
76224
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
30
74
2220
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. Brass screws and washers complete.
48
1147
55056
... More
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
13
4955
64415
... More
Providing and fixing white vitreous china laboratory sink with
C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required: Size 450x300x150 mm
10
3582
35820
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
1
8612
8612
... More
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
1
12848
12848
... More
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern
4
15737
62948
... More
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
9
2890
26010
... More
CP Brass fittings Providing and fixing unplasticised PVC connection pipe with
brass unions 45 cm length 15 mm nominal bore
121
60
7260
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.
44
249
10956
... More
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931
a) 15 mm nominal bore
59
361
21299
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ( for sink)
a) 15 mm nominal bore
20
570
11400
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
a) 15 mm nominal bore
239
478
114242
... More
Central Hole Basin Mixer with Popup Waste System with 450mm LongBraided Hoses (CQT-23169B jaguar)and other approved brand
10
2734
27340
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath) 15 mm diameter
14
4951
69314
... More
Providing and fixing C.P. brass shower rose with 15 or 20mm
inlet 150 mm diameter
18
158
2844
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15mm nominal bore
6
478
2868
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer- in-charge.
48
738
35424
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
36
120
4320
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
11
480
5280
... More
C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 a) 100mm dia centrifugally cast iron S & S pipe.
742
834
618828
... More
b) 75mm dia centrifugally cast iron S & S pipe.
553
687
379911
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste ) 32mm dia nominal bore
144
475
68400
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. SS 304 grade coupling with EPDM rubber gasket a) 100mm
248
308
76384
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. SS 304 grade coupling with EPDM rubber gasket SS 304 grade coupling with EPDM rubber gasket b)75mm
177
277
49029
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. for 100mm dia pipe.
99
258
25542
... More
b) for 75mm dia pipe.
99
256
25344
... More
Providing & fixing cast iron coller.a) 100mm dia.
248
330
81840
... More
b) 75mm dia.
184
258
47472
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :a) 100mm inlet & 100mm outlet.
42
609
25578
... More
a) 100mm inlet & 75mm outlet.
43
421
18103
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. a) 100mm
27
404
10908
... More
b) 75mm
27
298
8046
... More
Providing and fixing plain bend of required degree.Hubless centrifugally cast (spun) iron pipes epoxy coated inside &
outside IS:15905 a) 100mm
27
262
7074
... More
b) 75mm
27
180
4860
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100mm
42
660
27720
... More
75x75x75mm
42
474
19908
... More
Providing and fixing centrifugaly cast iron single equal plain
junction of required degree. 100x100x100mm
42
414
17388
... More
75x75x75mm
42
241
10122
... More
Providing and fixing single unequal junction of required degree
with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75mm
42
817
34314
... More
Providing and fixing single unequal plain invert branch of
required degree : 100x100x75mm
42
469
19698
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) a) 100mm
28
487
13636
... More
b) 75mm
29
383
11107
... More
Providing and fixing cast iron terminal guard. 100 mm
18
361
6498
... More
75 mm
16
288
4608
... More
INTERNAL RAIN WATER DRAINAGE WORK()
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 110 mm dia
80
688
55040
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
495
269
133155
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.Coupler 110 mm Bend 87.5 degree
43
97
4171
... More
110 mm Bend
43
107
4601
... More
110 mm Shoe
43
94
4042
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440
grams.
88.9
39
3467.1
... More
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
236
264
62304
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
43
212
9116
... More
INTERNAL WATER SUPPLY WORKS()
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the 20mm dia nominal outer dia pipes
756
383
289548
... More
25mm dia nominal outer dia pipes
520
447
232440
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm dia nominal bore Internal work-Exposed on wall
30
231
6930
... More
25mm dia nominal bore
74
291
21534
... More
32mm dia nominal bore
180
357
64260
... More
40mm dia nominal bore
130
481
62530
... More
50mm dia nominal bore
70
661
46270
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
16
444
7104
... More
32mm dia nominal bore
20
491
9820
... More
40mm dia nominal bore
20
589
11780
... More
50mm dia nominal bore
16
732
11712
... More
65mm dia nominal bore
2
1242
2484
... More
Providing and fixing cp soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
54
79
4266
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
46
331
15226
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank. Capcity in Per Liters
6000
7
42000
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
22
388
8536
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
3
836
2508
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground leveletc.300mm dia bore hole
25
589
14725
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
15
486
7290
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
12.13
1077
13064.01
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
13.11
1097
14381.67
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
1097
14381.67
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge.
1
1444
1444
... More
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.
1.50 m depth
Pipes 80 mm to 300 mm diameter
250
251
62750
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area
timbered). Depth not exceeding 1.5 meter
2200
51
112200
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including
testing of joints etc. complete.
150 mm. dia. RCC Pipes
120
396
47520
... More
250 mm. dia. RCC Pipes
180
641
115380
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
150 mm. dia.
100
530
53000
... More
250 mm. dia.
180
725
130500
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement
complete as per standard design.
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
With common burnt clay FPS (non modular) bricks of class designation 75
(i) For Sewer Line
8
9111
72888
... More
Extra for depth for manholes: Size 90x80cm with With common burnt modular) bricks of class designation 7.5
2
6296
12592
... More
Inside size 90x120cms and 90cms deep including CI cover with frame (MEDIUM duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg). (i) For Sewer Line
5
18838
94190
... More
Extra for depth for manholes: Size 90x120cm with With common burnt modular) bricks of class designation 7.5
4
7552
30208
... More
Constructing brick masonary circular manhole 1.22 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
5
17623
88115
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
7035
7035
... More
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra depth for circular type manhole 1.52 m internal dia (at bottom)beyond 2.30 m :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
50
16246
812300
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cementm concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design
:
2
388
776
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
80 mm nominal dia Pipes
90
1545
139050
... More
50 mm nominal dia Pipes
90
566
50940
... More
32 mm nominal dia Pipes
50
312
15600
... More
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32mm nominal bore.
5
589
2945
... More
50mm nominal bore.
10
732
7320
... More
80mm nominal bore.
6
1858
11148
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand
: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand )
12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
13481
26962
... More
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil
as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
250
251
62750
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
250
396
99000
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per
standard design 150 mm. dia.
250
530
132500
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line
10
9111
91110
... More
Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
6
6296
37776
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cementm concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design
:
24
388
9312
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground leveletc.a bore hole 350 mm dia
24
552
13248
... More
350 mm diaRocky strata including Boulders
120
1279
153480
... More
Supplying, assembling, lowering and fixing in venical
position in bore well, unplasticized PVC medium well casing (RMS) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 15Omm nominal size dia
240
576
138240
... More
“Gravel packing in tubewell construction in accordance
with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.
50
1444
72200
... More
Supplying, assembling, lowering and fixing in venical
position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
90
1499
134910
... More
Development of tube well in accordance with IS : 2800 (pan I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
400
774
309600
... More
BORE WELL INSTALLATIONS (NON-SCHEDULED ITEMS)
Supplying & Installation of suitable Hp submersible pump B.S or K.S.B or equivalent make with finolex cable 1x3x2.5 squmm(upto 75mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as MCB of 0-25Amp (Haveli or Indocopp or MDS make), Volt & Ampere meter (AE make), single phase preventer (Minilac or VSP -1 make) staner (L&T or BCH make) etc of approved make, 40mm HDPE Pipe (25 mtr) and all accessories complete as per requirement of site. NOTE: a) Contractor shall include the rate of electrical control
panels complete with all accessories &controIs, all Electrical/Mechanical items as required to operate the system automatic/manual.b) Contractor to select suitable HP of pumps .c) Level Controller with sufficient nos. of low / high level alarms, contacts with electrodes and control wiring for the automatic operation of water supply pumps, Submersible Sump Pumps, to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks shall be provided.Domestic water pumps must start at low water level in overhead domestic water tank & stop at high level in that water tank. Dry running protection shall be provided for all the pumps.Sequencing shall be provided for each set of pumps.
1
235857
235857
... More
STP(25KLD) - (as per PAR-2023 , SN. 6.20.1) [75000*25= RS1,875,000]
1
1837500
1837500
... More
Providing and laying reinforced cement concrete pipe NP4 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.
15
6606
99090
... More
Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clause 583
51.45
210
10804.5
... More
plastering with cement mortar (1:4) 15mm thick on brick work in sub structure cluase no. 613.4 &1204
1.5
387
580.5
... More
Trimixing of the surface of the cement concrete laid. (M.R.)
1050
249
261450
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. DSR-
16.46.1 Using grade 'A' sealing compound.
280
6
1680
... More
Providing and laying of 80 mm thick Interlocking cement concrete tiles (30 mpa) including leveling and dressing of surface to required level and slope,filling joints with local etc required for proper completion of work as directedsand including the cost of labour,material & T&P by Engineer-in-charge.
750
778
583500
... More
Brick work in 1:4 cement motar (cement : coarse sand) in foundation.
62.1
5259
326583.9
... More
cement concrete flooring (1:2:4)(1 cement:2 coarse sand:4c0arse aggregate 20mm) finished with afloating coat of neat cement slurry . 4omm thick
135
438
59130
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Iv) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).fOR sLAB /bEAM
412.74
8209
3388207.29
... More
As in item 6 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)
74.8
6552
490069.94
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
26.24
7744
203233.54
... More
Providing and fixing Green Board Like a Informatory,building name etc for all compound as per direction of EIC
34
12250
416500
... More
Electrical Work
Wiring for light point/ fan point/ exhaust fan point/ call bell point/plug point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1872
880
1647360
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
36
1163
41868
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required for inverter Wiring:-
1x1.5 mm
1950
33
64350
... More
S/F of Call Bell fixed etc.complete in all respect.
17
171
2907
... More
S/F of LED tube light batten Fitting suitable for upto 1X22watt LED tube light on surface.complete in all respect.
551
558
307458
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2110
248
523280
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
233
355
82715
... More
Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required for AC
46
541
24886
... More
2+4 way, SPN, single door, MCB DB
34
585
19890
... More
2+6 way, SPN, single door, MCB DB
11
750
8250
... More
2+10 way, SPN, single door, MCB DB
23
885
20355
... More
4 way (4+12), TPN, Vertical Type, MCB DB, Double Door
3
3942
11826
... More
4 way (4+12), TPN, MCB DB, double door, horizontal type
12
2019
24228
... More
6 A, to 32 A, ratings , SP MCB, "C" curve, 10 KA breaking capacity
437
100
43700
... More
S/F of 32 A DPMCB(10KA) C curve.
46
325
14950
... More
40 A, rating, 2 pole RCCB, 30mA
44
1431
62964
... More
63 A, rating, 2 pole RCCB, 30mA
36
1476
53136
... More
63 A, rating, 4 pole RCCB, 30mA
12
1528
18336
... More
4 pole MCCB,100A,30kA
3
4188
12564
... More
S/F of MCB blanking Plate for DB
34
5
170
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
83
804
66732
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
11110
204
2266440
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2540
248
629920
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
685
326
223310
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
995
424
421880
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 16 sq. mm + 1 X 6 sq. mm earth wire
330
574
189420
... More
S/L of 10 sqmm 3.5 core Al conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect.
3400
480
1632000
... More
S/L of 25 sqmm 3.5 core Al conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect.
700
544
380800
... More
S/L of 50 sqmm 3.5 core Al conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect.
1700
715
1215500
... More
S/L of 150 sqmm 3.5 core Al conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect.
200
1292
258400
... More
S/L of 400 sqmm 3.5 core Al conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect.
170
2803
476510
... More
Aluminium lugs for 6 sq. mm cable
352
1
352
... More
Aluminium lugs for 10 sq. mm cable
352
1
352
... More
Aluminium lugs for 25 sq. mm cable
48
3
144
... More
Aluminium lugs for 50 sq. mm cable
64
5
320
... More
Aluminium lugs for 150 sq. mm cable
8
16
128
... More
Aluminium lugs for 400 sq. mm cable
8
72
576
... More
S/F of electronic fan regulator 120-280 V ISI marked
410
506
207460
... More
Providing and fixing 25 mm X 5 mm G.1. strip on surface or in recess for connections etc. as required.
1140
181
206340
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
27
5565
150255
... More
S/F of LED Bulb 15 watt
193
176
33968
... More
S/F of Water tight oblong 10w LED Bulk Head luminaire having Die cast Alluminium housing with driver set confirming to IP 65 and above protection ,suitable for 24 Hrs.
28
1666
46648
... More
S/F of 18w to 20w LED reccess/surface mounting D0wn Light fitting
33
1725
56925
... More
S/F of 3w to 6w LED Decorative Mirror Light fitting
17
960
16320
... More
S/F of Double light wall bracket fixed on matching M.D.F.E.G. Board base etc.
4
2744
10976
... More
S/F of 75w to 90W LED Street Light Fitting having die cast Al body and diffuser, driver set. Complete in all respects. Cat AAA
24
8408
201792
... More
E & T of exhaust fan/Fresh air fan
49
191
9359
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
408
252
102816
... More
Supply & Errection of factory fabricated & wired metal clad dust and vermin proof floor mounting, panel M.S. channel base with bottom etc.complete in all respects. Incoming - 1 No. 1000 Amp ACB
Outgoing- 630 Amp-1 Nos., 63 Amp MCCB-6 Nos.
1
1274000
1274000
... More
Supply & Errection of factory fabricated & wired metal clad dust and vermin proof floor mounting, panel M.S. channel base with bottom etc.complete in all respects. Incoming 630 A MCCB-01 no. and Outgoing 100 A MCCB-03 Nos. And 63 A MCCB 6 Nos. -Main Panel selected.
1
784000
784000
... More
S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of
Engineer in charge.
1
13759
13759
... More
S/0 of Ceiling Fan 1200 mm
408
2033
829464
... More
Cost of Fresh Air Fan 300 mm
21
2254
47334
... More
Brass compression gland for (50 mm) 3% X 150 sq. mm 1.1 kV grade cable
1
159
159
... More
Brass compression gland for (82 mm) 32 X 400 sq. mm 1.1 kV
1
410
410
... More
Brass compression gland for (35 mm) 3% X 50 sq. mm 1.1 kV grade cable
12
82
984
... More
Brass compression gland for (25 mm) 4 X 10 sq. mm 1.1 kV grade Cable
2
36
72
... More
Brass compression gland for (28 mm) 3% X25 sq. mm 1.1 kV grade cable
2
56
112
... More
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70 mm, Bottom dia 130 mm and base plate 12mm thick) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect.
18
17987
323766
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respects CAT-AAA
18
7259
130662
... More
Supply and fixing of 15 Amp capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.
1
21756
21756
... More
S/F Heavy duty cadmium plated copper 4 way connector
18
264
4752
... More
S/F Anticlimbing Device.complete in all respect.
18
247
4446
... More
Supply And Laying of double walled corrugated 63 mm dia 6 kgf/sqcm HDPE Pipe at a depth of 1 mtr below ground level complete excavation and back filling.complete in all respect.
1500
80
120000
... More
S/F of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules
4
83
332
... More
SITC of Silent Diesel Generator Set of 62.5 KVA capacity with AMF Control Panel Three Phase as per CPCB IV
1
980000
980000
... More
Cost of Exhaust fan 300 mm
28
4067
113876
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing
surface/ recessed Steel/ PVC conduit as required. 1 Run of Cable
1250
42
52500
... More
Supplying, installing, testing and commissioning of 24 port CAT6 jack panel
loaded as per the connections required in jack panel.
3
6744
20232
... More
Supplying, installing, testing and commissioning of I/O(Information outlet )
for CAT6 Cable termination
46
207
9522
... More
Supplying, installing, testing and commissioning of 6 U wall mount rack with
fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts.
3
10894
32682
... More
Supplying, installing, testing and commissioning of 24 10/100/1000BASE-T
PoE-plus
3
77821
233463
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged Dome Camera, 1/3" CMOS, 4 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR with Scene Adaptive Control, Min. Pixels 2688 × 1520, Shutter Speed 1/3 - 1,00,000; Adavance Video Compression technology such as H.265 &
H.264 High Profile , Triple stream, 2.7–13.5 mm 5X motorized focus & zoom lens, BLC, HLC, 3DNR, Minimum Edge Intelligence Video Analytics : Motion Detection, Video Tampering, Face Detection, SD Card Error, SD Card Capacity Warning, Audio Detection, Object Abandoned, Object Missing, Tripwire/Intrusion; Loitering; Privacy Mask, 4 IR LEDs Smart IR with upto 50m IR distance, AES-256, SSH/Telnet closed, PCI Data Security Standard compliance; Dual channel Audio G.711a/ G.711Mu/ AAC/G.726, 128GB SD card support, Alarm: 2 In/ 1out, PoE Class 4 (802.3 at) and 12V DC, support aux. power supply of 2W , 12VDC for powering low power devices such as strobe light/hooter, IP 67, IK 10 vandal proof, Die-Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S, G and Q compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55032) , FCC
Part 15 & RoHS compliant. Make: Mobotix/ Avgilion/Flir/Axis/Honeywell/Bosch
26
44100
1146600
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/3" CMOS, 4 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR with Scene Adaptive Control, Min. Pixels 2688 × 1520, Shutter Speed 1/3 - 1,00,000; Adavance Video Compression technology such as H.265 &
H.264 High Profile , Triple stream, 2.7–13.5 mm 5X motorized focus & zoom lens, BLC, HLC, 3DNR, Minimum Edge Intelligence Video Analytics : Motion Detection, Video Tampering, Face Detection, SD Card Error, SD Card Capacity Warning, Audio Detection, Object Abandoned, Object Missing, Tripwire/Intrusion; Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, AES-256, SSH/Telnet closed, PCI Data Security Standard compliance, Hardware chipset for private key; Dual channel Audio G.711a/ G.711Mu/ AAC/G.726, 128GB SD card support, Alarm: 2 In/ 1out, Long Distance 3X PoE support upto 300m (300m @100Mbps) , PoE Class 4 (802.3 at) and 12V DC,support aux. power supply of 2W ,12VDC for powering low power devices such as strobe light/hooter, IP 67, IK 10 vandal proof, Die-Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S, G and Q compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55032) , FCC Part 15 & RoHS compliant. Make: Mobotix/ Avgilion/Flir/Axis/Honeywell/Bosch
20
47696
953920
... More
SITC of 48 channel Network Video StoragE NVR suitabe to access data from
any remote location including backup drive for 30days.
1
260092
260092
... More
Supply, Installation, Testing & Commissioning of CCTV Client Operator Station with 1 No.of 55” LED Display - Complete as per specifications &
preferred make. Make: SONY/Samsung/LG
1
80850
80850
... More
Supply, Installation, Testing & Commissioning of LCD CCTV Joystick Keyboard, LAN POE Connection, 3-Axis Propotional Control, 20 Functional Keys, UL, CE, FCC Listed, Make: Mobotix/
Avgilion/Flir/Axis/Honeywell/Bosch
1
95550
95550
... More
Supplying, installing, testing and commissioning of HDMI to HDMI Cable.
2
1244
2488
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench,
complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
100
81
8100
... More
Supply installing testing & commissioning of out door type junction box, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required suitable for mounting of 2 nos. 5/6Amp Switch &
Sockets.
1
630
630
... More
Fire Fighting Work :-
Part-A Hydrant System
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : . Make-Tata/Jindal100 mm dia.
300
1902
570600
... More
80 mm dia.
100
1403
140300
... More
25mm dia
100
554
55400
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30m
20
6461
129220
... More
SITC of Single headed Hydrant comprising of 80 mm dia. Flanged bend 63 mm dia. SS oblique pattern landing valve complete with blank and Cap .Make- New Age/Safeguard
20
5694
113880
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required :
40
3312
132480
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:stainless steel
20
1237
24740
... More
SITC of Hose Box of 18 SWG M.S Sheet with glass Fronted door to accommodate 2 nos. RRL Hose & 1 nos. SS Branch Pipe with nozzel. Make- New Age /Safeguard
20
3820
76400
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia.
6
4965
29790
... More
80 mm dia.
20
3710
74200
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required : 100 mm dia.
3
8230
24690
... More
80 mm dia.
1
5698
5698
... More
Terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 36m head.Make-Kirloskar
1
75864
75864
... More
SITC of Automatic Starter Panel for Terrace Pump suitable for teerace pump 450 lpm at 35 m head with all accessories Complete in all respects.
1
63700
63700
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way-100 mm dia M.S Pipe Make- New Age/Safeguard
1
5021
5021
... More
SITC of stainless steel chrome finished ball valves with fittings of screwed end tye
20
1882
37640
... More
SITC of Pressure Switch. Complete in all respect.
1
1536
1536
... More
Supply & Fixing of Fire Bucket 4 with Stand.TS
2
2877
5754
... More
Supply & fixing of ABC type Fire Extinguisher 4 kg Capacity. Complete in all respect.Make- safepro/Safeguard/Ceasefire
30
7702
231060
... More
Supply & fixing of Co2 type Fire Extinguisher 4.5 kg Capacity. Complete in all respect.Make- safepro/Safeguard/Ceasefire
30
11740
352200
... More
Providing and fixing 25 mm X 5 mm G.1. strip on surface or in recess for connections etc. as required.
100
181
18100
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
5565
11130
... More
SITC of Solar Panal Grid with all accessries compelete in all respect. (As per NEDA Specification)
1
500000
500000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%