Public Works Department Tender

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510 for proper completion of work as per direction of Engineer-in-charge.

Construction of un-reinforced, plain cement concrete pavement with M30 grade concrete, thickness as per design, over a prepared sub base with 43 grade cement as per Clause 1501.2.2, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.20 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side framework(steel channel, laying and fixing of 125 micron thick polythene film including levelling the framework as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in a continuous operation including provision of contraction joints, applying curing of concrete slabs for 14-days and water finished to lines and grades as per drawing and MORD specification Clause 1501.

Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not not exceding 0.50 mt. in depth and work in embankmet to be n 20 cm. layers includding ramming and dressing the surface to required level and slope and also including 1.5 mt. lift and 30 mt. lead as per SL. No.253 detailed specification & direction of E/I. for Making Shoulders.

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.5 metre (5 fts) and lead upto 30m (100 fts) & including filling watering and ramming of excavation earth into the trenches or into the space between the building as per S.I. No. 251

Cement Concrete with 4 cm. (1½") gauge approved Bricks ballast ,approved Fine sand and cement in the proportions or 6:3:1 including supply of all materials, labour and T&P etc. required for proper completion of the work .(SI No-280

R.C.C. work with cement approved coarse sand and 20mm. gauge approved stone grit in the proportion of 1:1.50:3 in lintels of doors and windows, excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including S/o all materials required for proper completion of the work. as per S.I. No. 285A

Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work (when not including in overall rates) wrought to required shape as necessary including binding for proper completion of the work and including supply of steel its wastage. Bend books and authorized overlapping shall be measured as per S.I. No.- 504