Public Works Department Tender

6M Span over head Cantilever Structure with 300 dia M S one vertical post. Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Retro Reflective Signs Board Providing & fixing of reflective signs with a corrosion resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3

Retro Reflective Signs (Stenless Steel frame and post with both side sings) Supply and fixing of reflective sign board (double side) of size 1.50x120m retro reflective sheeting of HIP grade type-IV. the board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4mm thick. ACP sheet of standard make as per MORTH specification. The Board shall be fixed using 2 man post 45x45x60 cm cement concrete foundation, The stainless steel joint welding of SS pipe work shall be band and grinder properly including bufting so an to give uniform shining at weded joints. The retro reflective sheeting tyep-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC- 67:2012 & proof of same in form of government report shall be uploaded while quoting tender.