Public Works Department Tender

Supply, fixing and hosting of 6.00-7.00 m. span cantilever structure in position with one vertical post of 6.00M. Clear height from the top of R.C.C. foundation made of 300 mm dia pipe welded with 10 mm thick MS plate at bottom supported with 10mm thick MS plate stiffners & two nos. 8 mm thick MS plates at tope welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawaing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of syntheric enamel paint on the whole wtructure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty, Rates include design, fabrication, supply, transportation and erection of the signage structure royalty, VAT etc. all T&P/ machine material and labour required for proper completion of the work.

Retro reflective signboard made up of 2mm thick alluminium sheet, face to be fully covered with 3M high intensity prismatic reflective sheeting series 3930, letters/symbols shall be made of same retroreflective sheeting and computer cut as per colour required. Boards are to be supplied alongwith back support frame of MS angle size 35x35x5 mm and back side of alluminium sheet shall be painted with stove enamel paint with 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty, VAT etc. all T&P/machine material and labour required for proper completion of work.

TRAFFIC SIGNS - TRAFFIC SIGN HUMP/SPEED TABLE Board Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90 cm x 90 cm×90cm triangle) as per IRC:67 made of high intensity grade sheeting grade-type-IV vide clause 801.3, fixed cover aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing and E-in-c Circular No-62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019.