Public Works Department Tender

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm Nominal outer dia pipe. As per (DSR-2023 18.7.6)*0.735

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia. As per (DSR-2023 18.52)*0.735

S/f of European type W.C. Sheet 450 mm size with commode cover etc. (DSR-2023 17.2.1)*0.735

Providing and fixing one piece construction white vitreous China squitting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern. As per D (DSR-2023 17.6.1)*0.735

S/f of premium type wash hand basin 500x400 mm size of white glazed earthen ware (22"x16") C.P. West coupling and one pair M.S. Bracket and labour charge etc. (DSR-2023 17.7.4)*0.735

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per (DSR-2023 17.31)*0.735

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. As per (DSR-2023 17.73.2)*0.735

Providing and jointing 150 mm dia Stone ware pipe (to level or slopes and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.2)*0.735

Providing and jointing 200 mm dia Stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.3)*0.735

Providing and jointing 250 mm dia stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.4)*0.735

Providing and jointing 300 mm dia Stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.5)*0.735

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 150 mm dia (As per DSR No. 19.3.2)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 200 mm dia (As per DSR No. 19.3.3)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 250 mm dia (As per DSR No. 19.3.4)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design300 mm dia (As per DSR No. 19.3.5)

Supplying and Fixing of PVC gully trap grade "A" Complete with G.I grating brick masonary chamber and water tight C.I. Cover with from of 300 mm x 300 mm size (inside) square mouth traps of "P" or "S" traps. 100 x 100 mm size As per (DSR-2023 19.4.1.1)*0.735

Construction man hole with RCC top slab in 1:2:4 mix foundation concrete 1:4:8 mix inside plaster 15 mm thick with cement mortar 1:3 (cement and fine sand) with a floating coat of neat cement and making a channels in cement concrete 1:2:4 mix finished smooth including curing and testing. Inside size 90x80 cm. and 450 mm deep including CI cover and frame (DSR-2023 19.7.1.1)*0.735

Inside size 120x90 cm deep i/c CI. Cover with frame (heavy Duty) 560mm internal diameter total weight of cover and frame to be not less than 208 kg ( wt of cover 108 kg and weight of frame 100 kg ) As per (DSR-2023 19.7.3.1)*0.735

Providing and fixing unplasticised PVC pipe clips of approved design PvC rain pipes with intel/ outlet bend etc. compete 110 mm dia. as per (DSR-2023 12.43.2)*0.735 110 mm dia

Providing and placing on terrace poly thylene water storage tank of approved brand and manufactured with cover and locking arrangement necessary hooks of inlet etc. complete for tank capacity 100 Ltr. (DSR-2023 18.48)*0.735

Excavating trenches of required width for pipes, cables, etc includig excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and the returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc and disposing of surplus excavated soil as directed, within a lead of 50 m (DSR-2023 2.10.1.12)*0.735

Providing and Fixing shower with 8 mm dia 200x200 mm As per (DSR-2023 18.64)*0.735

Providing and Fixing Long body Bip cock. As per (DSR-2023 18.51)*0.735

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern (DSR-2023- 16.91.2)*0.735

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). (DSR-2023-9.147D.2)*0.735

Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). as per (DSR-2023-14.88)*0.735

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). (DSR-2023 4.1.8)*0.735