Public Works Department Tender

Place Identification Sign- 1450x2440mm with 1 Nos Pipe Post Providing and Fixing of Retro Reflective 1450x2440mm sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer &Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The bact frame shall be supported on 165.1OD mild steel iron Pipe post or as per structural requirement with one coat of steel primer and two coats of synthetic enamel paint. which shall be firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Retro Reflective sign board shall have 10 year warranty issued by the original sheeting manufacturer. The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Map Type Sign/Image Board with 5 Language- 2440x1830mm with 2 Nos Pipe Post : Providing and Fixing of Retro Reflective 2440x1830mm sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The bact frame shall be supported on 127OD mild steel iron Pipe post or as per structural requirement with one coat of steel primer and two coats of synthetic enamel paint. . which shall be firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Retro Reflective sign board shall have 10 year warranty issued by the original sheeting manufacturer. The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Multilingual Sign type 2 - 1220x1525mm with 1 Nos Pipe Post : Providing and Fixing of Retro Reflective 1220x1525mm sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The bact frame shall be supported on 165.1OD mild steel iron Pipe post or as per structural requirement with one coat of steel primer and two coats of synthetic enamel paint. . which shall be firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Retro Reflective sign board shall have 10 year warranty issued by the original sheeting manufacturer. The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Facilities, Cautionary,Mandatory Sign- 915x1220mm with 1 Nos Pipe Post Providing and Fixing of Retro Reflective 915x1220mm sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The bact frame shall be supported on 114.3OD mild steel iron Pipe post or as per structural requirement with one coat of steel primer and two coats of synthetic enamel paint. Which shall be firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Retro Reflective sign board shall have 10 year warranty issued by the original sheeting manufacturer. The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.Special Inks used for printing letters/ legends/ directions/ theme shall be certified for low volatile organic compound emission & shall be water based ink (non solvent & non eco solvent ink) with durability of 10 years atleast. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Cat Eyes/Road Stud :Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Impact Polystyrene) or Acrylonitrile Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280.The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be moulded of methyl methecrylate conforming to ASTM D788 or equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the Engineer . In addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. - MoRTH 804 (8.35) Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Solar Power road marker (Solar Studs) : The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz Its should be able to give the prescribed performance in the temperature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. MoRTH 804 (8.35) Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Road Delinator :Road Delinator Providing and fixing of Standard Metal Delineator as per IRC 79-2019 consisting of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 07 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI lable specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof.). The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. If somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer. MoRTH 805 (8.15) Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Providing & Fixing of signage facia comprises of ACP sheeting pasted with Diamond Grade retro reflective sheeting as per IRC 67 : 2022. The signage shall include lettering and signs/ legends as Applicable. Back support frame shall be of 35x35x5mm MS angle. Add 2 per cent of cost of angle iron towards cost of drilling holes, nuts, bolts etc.The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Repair & Removal of Sheeting existing Over Head : Repair & Removal of existing Overhead Old Sign Facia from Overhead & shifting it to factory. The work includes Supply & fixing the required Nut Bolt, Crane and other material to fix/remove the sign facia. The work also includes painting on MS pipe with two coat of enamel paint over primer coat after proper sanding the pipe.These rates are exclusive of cost of new signa facia. The Rates shall include cost of fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge.

Repair & Removal of Sheeting existing Cantilever : Repair & Removal of existing Old Sign Facia from Cantilever & shifting it to factory. The work includes Supply & fixing the required Nut Bolt, Crane and other material to fix/remove the sign facia. The work also includes painting on MS pipe with two coat of enamel paint over primer coat after proper sanding the pipe.These rates are exclusive of cost of new signa facia. The Rates shall include cost of fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge.

Retro-Reflective Sheeting type-XI : Providing & Fixing of signage facia comprises of ACP sheeting pasted with Diamond Grade retro reflective sheeting as per IRC 67 : 2022. The signage shall include lettering and signs/ legends as Applicable. Back support frame shall be of 35x35x5mm MS angle. Add 2 per cent of cost of angle iron towards cost of drilling holes, nuts, bolts etc.The contractor need to submit calcoast test report for specular gloss & fungus resistance test as per IRC 67:2022 for clearance of final bill.All boards must be printed via OEM approved Digital printer self owned with MTS warranty of OEM as per the IRC 67-2022.. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from government test lab report of 3 year outdoor weathering test conducted in India condition test lab for the product offered shall be submitted by the contractor. All Boards must be manufactured via. digital Printing process as per IRC 67:2022, & bidder must submit outdoor weathring test report of digital printed board as per IRC along with bid. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.

Repair & installation of old sinage (915x1220 mm) from PWD store to site: Repair and Fixing of sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The back frame shall be supported on mild steel iron Pipe post or as per structural requirement. which shall be firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Rates shall include cost of fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge.

Repair & installation of old sinage (1220x1830) from PWD store to site: Repair and Fixing of sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The back frame shall be supported on mild steel iron Pipe post or as per structural requirement. which shall be firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Rates shall include cost of fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge

Repair & installation of old sinage (1830x2440) from PWD store to site: Repair and Fixing of sign boards made out of Diamond grade sheeting type XI Printed by Digital Printer & Pasting overlay on it conforming to IRC-67: 2022 and ASTM D4956-09 specifications. The same shall be fixed over 4mm thick ACP sheet supported with Back support frame of 35x35x5mm mild steel angle. The back frame shall be supported on mild steel iron Pipe post or as per structural requirement. which shall be firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 450 mm X 450 mm X 1200 mm as per approved drawing. The Rates shall include cost of fabrication, supply, transportations, Local Shifting, Erection of Signage Structure using Crane, inclusive of local taxes, etc, all T&P, machine, material and labour required for proper completion of work as per direction of Engineer in charge.

AFP (Aluminum-backed flexible prismatic sheeting) : Aluminum-backed flexible prismatic sheeting shall be made of yellow colored flexible prismatic sheeting with non-metallic prismatic lens formed in a transparent, synthetic resin as retro reflective elements. This flexible prismatic sheeting shall have black and yellow stripes with aluminum backed flexible prismatic Type VI sheeting conforming to ASTM: D4956 specifications and standards of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black colour in a continuous roll format. Width of object marker shall be 300 mm. The rate shall include all materiais, labour, T&P. transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. Rest Conditions will be as per ENC circular No.944/MT/60MT/SAMANYA VARG/2023-24 Dated:23-01-2024.