Public Works Department Tender

12-15 m Span Over Head Structure with 300 mm dia MS two vertical post: Supply, fixing & eraction of built up Overhead Structure of 12-15 M span comprising of two vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 12 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 (cement coarse sand and 40 mm gauge S.B) RCC with 1:2:4 (cement, coarse sand and 20 mm stone grit) including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete.Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect. The Rates shall include cost of design, fabrication, supply, transportations, Local shifting Erection of Signage structure using crane, inclusive of all taxes, royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Cat Eyes: Supply and fixing of reflective raised pavement markers with its body surface made of tough polycarbonate and its reflective lens (capable of providing total internal reflection) Cat Eye.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150X75X5 mm spaced 2 m centre to centre, 1.8 m height, 1.1 m below ground/road level, all steel part and fitment to be galvanised by hot dip process, all fittings to confirm to IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150X75X5 mm,330 mm long complete as per MORTH Specificationclause 810 and also including fixing in cement concrete 1:2:4 (1-Cement, 2-Coarse Sand, 4- 20mm nominal size stone grit) including all material, labour, T&P etc. R.C.C. foundation of 0.35X0.35 m and 1.10 m deep.