Public Works Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date16 Jan 2025
Closing Date14 Feb 2025
Tender Amount₹ 19,99,99,027
Costs
EMD
₹ 30,00,000Document Cost
₹ 2,354Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEMBD_993751_2Tender No
8158/NIVIDA, Dated 27-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
In all kind of soil upto 3.0m to 4.5m. depth
22.59
-
-
... More
In all kind of soil upto 4.5 m to 6.0m. depth
10.54
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5000.91
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
627.77
-
-
... More
All kind of Soil
153
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
8.9
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
842.64
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor.
-
-
-
... More
With Chlorpyriphos/ Linadane E.C. 20% with 1%
concentration.
70
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (plan area to be measured)
83
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 330 kg /cum (For R.C.C. Lintel) For 362 kg/Cum .
24.48
-
-
... More
Slabs (Using M-25 Mix concrete)
927.99
-
-
... More
As in item 7 but for the lighter beams i.e. having spans upto 6 m. (Using m-25 Mix concrete)
878.65
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without airing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All work upto plinth level.Concrete of M25 grade with minimum cement content of 330 kg /cum (For R.C.C. Footing or Raft) For 362 kg/Cum
2022.55
-
-
... More
As in item 7 above but in R.C.C. columns in
having strength not less than M-25.
461.38
-
-
... More
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning/ centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063).
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :including supply of all meterials, labour and T&P etc. required for proper completion of work.
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
404.6
-
-
... More
Brick work with common burnt clay FPS (non-modular) bricks of class designation 150 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand) including supply of all meterials, labour and T&P etc. required for proper completion of work.
325.58
-
-
... More
Brick work in 1:4 cement mortar (Cement:Coarse sand) in Foundation
69.06
-
-
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
452.89
-
-
... More
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx.
including cost of fuel if any.
13.2
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all meterials, labour and T&P etc. required for proper completion of work.
1978.79
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) including supply of all meterials, labour and T&P etc. required for proper completion of work.
1522.1
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
626985
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
2654
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
-
-
-
... More
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf.
555.93
-
-
... More
(b) Double leaf
28.8
-
-
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
Kiln seasoned and chemically treated hollock wood
80.7
-
-
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading
32.85
-
-
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
68.4
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a
priming coat of approved steel primer.
10.51
-
-
... More
Mild steel or iron work
-
-
-
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1596.4
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13362.94
-
-
... More
Z-Section steel windows (openable)
16942.56
-
-
... More
Angle iron door chaukhats 40*40*5
4032.45
-
-
... More
15 mm cement plaster on rough side of single or
half brick wall of mix : 1:4 (1 cement: 4 coarse sand).
429.87
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
12609.57
-
-
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
8465.7
-
-
... More
12 MM thick plaster (1:4)
318
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
102.5
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar
1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 MM thick
3
-
-
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
3012.38
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
4524.94
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
437.74
-
-
... More
R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)
126.66
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
31.84
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the Manufacturer)of1stqualityconformingtoIS: 15622of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (FLOORING)
293.13
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1085.41
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
673.44
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :25 mm thick
2787.75
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
212.6
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
3938.57
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
360.17
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.
225.73
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10
8325.32
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
10024.4
-
-
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
2
-
-
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
4
-
-
... More
Providing and fixing ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
4
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
2
-
-
... More
Distempering with oil bound washable distemper of approved brand New work (two or more coats) over and including water thinnable priming coat with cement primer
19260.97
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
17910.15
-
-
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats
623.04
-
-
... More
12 MM CEMENT PLASTER OF MIX 1:6 (1 cement : 6 fine sand)
2928.83
-
-
... More
15 mm cement plaster on the rough side of single of half brick wall of mix: 1:6 (1 cement : 6 fine sand)
57.1
-
-
... More
6mm cement plaster of mix: 1:3 (1 cement: 3 fine sand)
100
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
162
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-IV) : 4 graded stoneaggregate 20 mm nominal size)
2.24
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size)
14.01
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
46.16
-
-
... More
Centering and shuttering including strutting, propping etc. and remova of form for :
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
100.68
-
-
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:
-
-
-
... More
With 20x20mm square bar
22
-
-
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal
diameter
3
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
... More
Drilling of 300mm dia bore hole manually.
25
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
150 mm nominal size dia
15
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
12.13
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
13.11
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge.
1
-
-
... More
DESILTING CHAMBER
-
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 coarse sand)
17.36
-
-
... More
Centering and shuttering including strutting, propping etc. and remova of form for :
-
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string
193.5
-
-
... More
BORE WELL INSTALLATIONS (As per D.S.R.2018)
-
-
-
... More
Transportation of Rig Machine
-
-
-
... More
All types of soil
-
-
-
... More
350 mm dia
24
-
-
... More
Rocky strata including Boulders
-
-
-
... More
350 mm dia
120
-
-
... More
Supplying, assembling, lowering and fixing in venical
position in bore well, unplasticized PVC medium well casing (RMS) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
... More
15Omm nominal size dia
240
-
-
... More
“Gravel packing in tubewell construction in accordance
with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.
50
-
-
... More
Supplying, assembling, lowering and fixing in venical
position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
... More
150 mm nominal size dia
60
-
-
... More
Development of tube well in accordance with IS : 2800 (pan I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
400
-
-
... More
BORE WELL INSTALLATIONS (NON-SCHEDULED ITEMS)
-
-
-
... More
Supplying & Installation of suitable Hp submersible pump B.S or K.S.B or equivalent make with finolex cable 1x3x2.5 squmm(upto 75mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as MCB of 0-25Amp (Haveli or Indocopp or MDS make), Volt & Ampere meter (AE make), single phase preventer (Minilac or VSP -1 make) staner (L&T or BCH make) etc of approved make, 40mm HDPE Pipe (25 mtr) and all accessories complete as per requirement of site.
2
-
-
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area
timbered).
-
-
-
... More
Depth not exceeding 1.5 meter
2400
-
-
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including
testing of joints etc. complete.
-
-
-
... More
150 mm. dia. RCC Pipes
120
-
-
... More
250 mm. dia. RCC Pipes
230
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
-
-
-
... More
150 mm. dia.
120
-
-
... More
250 mm. dia.
200
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
With common burnt clay FPS (non modular) bricks of class designation 75
-
-
-
... More
(i) For Sewer Line
10
-
-
... More
Extra for depth for manholes:
-
-
-
... More
Size 90x80cm with With common burnt (non modular) bricks of class designation 150
2
-
-
... More
Inside size 90x120cms and 90cms deep including CI cover with frame (MEDIUM duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg).
-
-
-
... More
With common burnt clay FPS (non modular) bricks of class designation 75
-
-
-
... More
(i) For Sewer Line
10
-
-
... More
Extra for depth for manholes:
-
-
-
... More
Size 90x120cm with With common burnt (non modular) bricks of class designation 150
4
-
-
... More
Constructing brick masonary circular manhole 1.22 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:
-
-
-
... More
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation150
5
-
-
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 150
1
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cementm concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design:
50
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
2
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work
-
-
-
... More
80 mm nominal dia Pipes
100
-
-
... More
50 mm nominal dia Pipes
90
-
-
... More
32 mm nominal dia Pipes
50
-
-
... More
DISTRIBUTION SYSTEM
-
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
40mm nominal bore.
5
-
-
... More
50mm nominal bore.
10
-
-
... More
80mm nominal bore.
6
-
-
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 150
2
-
-
... More
Pipes 80 mm to 300 mm diameter
700
-
-
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
-
-
-
... More
150 mm. dia. RCC Pipes
400
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per
standard design
-
-
-
... More
150 mm. dia.
400
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
With common burnt clay FPS (non modular) bricks of class designation 75
-
-
-
... More
(i) For Sewer Line
20
-
-
... More
Extra for depth for manholes:
-
-
-
... More
Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 150
6
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cementm concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design:
50
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
1324.76
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (Wood works) surface.
1161.9
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound
-
-
-
... More
IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick
-
-
-
... More
jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65
3055.97
-
-
... More
Providing and fixiing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutte thickness complete.
205
-
-
... More
Construction of drain alongwith apron.
357.53
-
-
... More
Construction of drain alongwith apron.
367.06
-
-
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
80.92
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
243.13
-
-
... More
Providing & fixing stainless steel sliding door
bolts ISI marked complete. (a) 300mm x 16mm.
231
-
-
... More
Providing & fixing stainless steel tower bolts (BARREL TYPE) WITH NECESSARY SCREWS ETC. COMPLETE.
114
-
-
... More
Providing & fixing stainless steel tower bolts ISI
marked complete. (a) 250 mm x 10mm
175
-
-
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
116
-
-
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
346
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
10535
-
-
... More
Profile sheet Roofing
301
-
-
... More
Providing & fixing glazing in Z-section, windows, doors, ventilators shutters and partitions etc with Glass Putty/beading etc completion : with float glass panes 4.0mm thick
559.72
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
5504.7
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement
without any pigment
212.5
-
-
... More
Centering and shuttering including strutting,
propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for
mass concrete
749.43
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
8000.1
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
118
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and
Struts
3853.07
-
-
... More
Lintels, beams, plinth beams, girders, bressumers
and cantilevers.
9397.54
-
-
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
36
-
-
... More
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden of steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
450
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
168.75
-
-
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
... More
Cement concrete prepared with batch mixing machine
382.5
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge.
-
-
-
... More
With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
225
-
-
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc.
225
-
-
... More
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
18
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked black solid plastic seat and lid
41
-
-
... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls
wherever required.
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm
with a single 15 mm C.P. brass pillar tap
52
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
32 mm dia
42
-
-
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. Brass screws and washers complete.
48
-
-
... More
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.
-
-
-
... More
Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
17
-
-
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm
10
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:
-
-
-
... More
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
1
-
-
... More
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
1
-
-
... More
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern
4
-
-
... More
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Granite Stone of approved shade
9
-
-
... More
CP Brass fittings
-
-
-
... More
Providing and fixing unplasticised PVC connection pipe with brass unions
-
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
129
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.
34
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
... More
a) 15 mm nominal bore
54
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ( for sink)
-
-
-
... More
a) 15 mm nominal bore
32
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and
gyser points of approved quality conforming to IS:8931
-
-
-
... More
a) 15 mm nominal bore
251
-
-
... More
Central Hole Basin Mixer with Popup Waste System with 450mm LongBraided Hoses (CQT-23169B jaguar)
10
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath)
14
-
-
... More
15 mm diameter
-
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20mm
inlet
-
-
-
... More
150 mm diameter
18
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of
standard design and of approved make conforming to IS:8931:
-
-
-
... More
15mm nominal bore
6
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer- in-charge.
48
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide,
125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
40
-
-
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
-
-
-
... More
a) 100mm dia centrifugally cast iron S & S pipe.
750
-
-
... More
b) 75mm dia centrifugally cast iron S & S pipe.
528
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
-
-
-
... More
32mm dia nominal bore
123
-
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe.
-
-
-
... More
a) 100mm
-
-
-
... More
SS 304 grade coupling with EPDM rubber gasket
256
-
-
... More
b) 75mm
-
-
-
... More
SS 304 grade coupling with EPDM rubber gasket
169
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal
-
-
-
... More
size). Including cost of cutting holes & making good the walls etc.
-
-
-
... More
a) for 100mm dia pipe.
119
-
-
... More
b) for 75mm dia pipe.
99
-
-
... More
Providing & fixing cast iron coller.
-
-
-
... More
a) 100mm dia.
256
-
-
... More
b) 75mm dia.
184
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
a) 100mm inlet & 100mm outlet.
44
-
-
... More
a) 100mm inlet & 75mm outlet.
43
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
a) 100mm
29
-
-
... More
b) 75mm
27
-
-
... More
Providing and fixing plain bend of required degree.Hubless centrifugally cast (spun) iron pipes epoxy coated inside &
outside IS:15905
-
-
-
... More
a) 100mm
29
-
-
... More
b) 75mm
27
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick,
bolts and nuts complete.
-
-
-
... More
100x100x100mm
34
-
-
... More
75x75x75mm
32
-
-
... More
Providing and fixing centrifugaly cast iron single equal plain
junction of required degree.
-
-
-
... More
100x100x100mm
34
-
-
... More
75x75x75mm
32
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
-
-
-
... More
100x100x75mm
47
-
-
... More
Providing and fixing single unequal plain invert branch of
required degree :
-
-
-
... More
100x100x75mm
42
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
-
-
-
... More
a) 100mm
30
-
-
... More
b) 75mm
29
-
-
... More
Providing and fixing cast iron terminal guard.
-
-
-
... More
100 mm
20
-
-
... More
75 mm
16
-
-
... More
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
-
-
-
... More
110 mm dia
85
-
-
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for
thermal expansion.
-
-
-
... More
110 mm
509
-
-
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for
thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
110 mm
45
-
-
... More
Bend 87.5 degree
-
-
-
... More
110 mm Bend
45
-
-
... More
Shoe (Plain)
-
-
-
... More
110 mm Shoe
45
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440
grams.
45
-
-
... More
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
256
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
47
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the
walls etc.
-
-
-
... More
20mm dia nominal outer dia pipes
658
-
-
... More
25mm dia nominal outer dia pipes
490
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Internal work-Exposed on wall
-
-
-
... More
20mm dia nominal bore
45
-
-
... More
25mm dia nominal bore
94
-
-
... More
32mm dia nominal bore
200
-
-
... More
40mm dia nominal bore
130
-
-
... More
50mm dia nominal bore
70
-
-
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
25mm dia nominal bore
22
-
-
... More
32mm dia nominal bore
22
-
-
... More
40mm dia nominal bore
22
-
-
... More
50mm dia nominal bore
16
-
-
... More
Providing and fixing cp soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
56
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
52
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capcity in Per Liters
11000
-
-
... More
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
11
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls.
etc. ( for wash basin waste ) 32mm dia nominal bore
21
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works up to plinth level
-
-
-
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
50.5
-
-
... More
All works above plinth level up to floor V level
-
-
-
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
22
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
86
-
-
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 100x10 mm
8
-
-
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
100 mm
4
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters.
7
-
-
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters.
7
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
214.3
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.
162
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
36
-
-
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
-
-
-
... More
Using rough kota stone.
35
-
-
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
-
-
-
... More
Using rough Kota stone
184
-
-
... More
(Electrical Component)
-
-
-
... More
Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
899
-
-
... More
Wiring for fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
341
-
-
... More
Wiring for exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
68
-
-
... More
Wiring for call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
19
-
-
... More
Wiring for Twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
13
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
4325
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
4270
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
4034
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1578
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
2277
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
900
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
850
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
580
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25 mm
2520
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but
excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
20
-
-
... More
TV socket outlet
29
-
-
... More
RJ45 socket cat 6 with shutter
66
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.
as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
94
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
452
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as
required.
257
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
64
-
-
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
64
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
4000
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
31
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way , Double door
3
-
-
... More
8 way , Double door
8
-
-
... More
12 way , Double door
8
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
-
-
-
... More
4 way (4 + 12), Double door
7
-
-
... More
6 way (4 + 18), Double door
15
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4way VTPN , Double door
6
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes
in cubicle panel, making connections, etc. as required.
-
-
-
... More
100 A, 16 KA.TPMCCB
2
-
-
... More
150 A, 16 KA.TPMCCB
2
-
-
... More
200 A, 16 KA,TPMCCB
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
429
-
-
... More
Double pole
43
-
-
... More
Supplying and fixing 40/ 63A rating, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for4 POL n the existing MCB DB complete with connections, testing and commissioning etc. as required.
L&T MAKE OR EQUIVLANT
24
-
-
... More
Supply and fixing of 40 Amp DP MCB C CURV CAT-A (L&t) MAKE
15
-
-
... More
Supply and fixing of 63 Amp DP MCB C CURV CAT-A (L&t) MAKE
6
-
-
... More
Supplying and installing following size of perforated painted
with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with
M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
290
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
31
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,
bolt, spring, washer excavation and re-filling etc. as required.
450
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.
405
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
200
-
-
... More
SUPPLY OF 15 W LED BULB
193
-
-
... More
Supply and fixing of IP 20, Front Lit, Mid Power SMD type LED Light,Recess mounting round/square 12Watt to 15Watt, with cut out min 125 mm, height min 40 mm, LED Downlighter having Powder coated die cast aluminium housing with heat sink,, diffuser/ Reflector and driver set, suitable for 24 Hr Continuous
Operation, complete in all respect.1320-1650 system lumens, 110 Lm/W, PF0.95, THD 10% at full load, CRI 80, with 3 year warrantee CAT-AA
274
-
-
... More
Supply and fixing of IP 20, Mid Power SMD type LED Light, 1'x1' square shape Recess/Surface mounting 18Watt to 20Watt, LED Light having Powder coated die cast aluminium housing with heat sink, High purity / transmisivity UV Stabilized Non yellowish diffuser/ Reflector for uniform light distribution, detachable driver set, suitable for 24 Hr Continuous Operation, Complete in All 1980-2200 system lumens, 110 Lm/W, PF0.95, THD 10% at full load, CRI 80, with 3 years warrantee.CAT-AA
100
-
-
... More
Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect 2420 system lumens, 110 Lm/W, PF0.95, THD10%, CRI80, Tube with aluminium sink heat with 3 year warrantee CAT-AA
202
-
-
... More
Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in All respect. compelete in all respect.1100 system lumens, 110 Lm/W, PF0.95, CRI 70, with 3 years warrantee CAT-AA
13
-
-
... More
Supply and fixing of decorative 20 Watt Mirror Light(Havells /Equiblant) make
27
-
-
... More
Supply and fixing of decorative 40 Watt to 45 Watt, LED Post top indirect light luminaire having Pressure die cast aluminium body and UV Stabilized PC Clear/ frosted glass cover, with driver set confirming to IP 66 and IK 08 protection, Potted driver (Notcircuitory) complete in all respect.4400-4950 system lumens, 110 Lm/W, PF0.95, THD
10% at full load, CRI 70, with 3 years warrantee CAT-AA
4
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
347
-
-
... More
SUPPLY AND FIXING OF GI FAN BOX FOR CEILING FAN
325
-
-
... More
Supply of exhaust fan, 300mm sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref.Trans Air 12" or equivalent.
72
-
-
... More
Supply of exhaust fan, 450 mm ,1400 rpm ,single phase sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref. CRAMPTON or equivalent.
10
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade on cale tray as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.(ON CABLE TRAY) VTPN TO TPN DB
-
-
-
... More
70 sq. mm 3-1/2 core
100
-
-
... More
95 sq. mm 3-1/2 core
110
-
-
... More
120 sq. mm 3-1/2 core
310
-
-
... More
150 sq. mm 3-1/2 core
120
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC / Hume / Metal pipe` as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.
-
-
-
... More
300 sq. mm 3-1/2 core (MAIN CONTROLL PANEL TO SCHOOL BUILDING PANEL)
120
-
-
... More
400 sq. mm 3-1/2 core (SUB STATION TO MAIN CONTROOL PANEL)
288
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.
-
-
-
... More
3½ X 35 sq. mm (32mm)
12
-
-
... More
3½ X 50 sq. mm (35mm)
6
-
-
... More
3½ X 95 sq. mm (45mm)
6
-
-
... More
3½ X 150 sq. mm (50mm)
6
-
-
... More
3½ X 300 sq. mm (62mm)
6
-
-
... More
3,1/2 X 400 sq. mm (82mm)
6
-
-
... More
supply and fixing of Following
-
-
-
... More
LUG For 2.5 sq. mm
655
-
-
... More
LUG For 4sq. mm
445
-
-
... More
LUG For 6sq. mm
220
-
-
... More
LUG For 10sq. Mm
154
-
-
... More
LUG For 16sq. mm
283
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement
: 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
300 mm dia
266
-
-
... More
200 mm dia (OD-200 mm & ID-175 mm nominal)
40
-
-
... More
3 Phase Input & 3 Phase Output 10KVA UPS
-
-
-
... More
Supply, installation, testing, and commissioning of UPS system with following features 1. High freq. PWM inverter using IGBT
2. Manual/Auto bypass switch
3. SMF batteries to provide approx. 30 min backup time on IT load alongwith battery rack
1
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
6
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
... More
For 4 way, Double door TPN MCBDB
9
-
-
... More
For 6 way, Double door TPN MCBDB
15
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 6 way, Double door SPN MCBDB
3
-
-
... More
For 8 way, Double door SPN MCBDB
9
-
-
... More
For 10 way, Double door SPN MCBDB
6
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
Supply, Installation, Testing amd Commissioning of LT Panel vermin proof floor mounting , M.S. channel base with bottom and Fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus Bar of panel shall be of Electrical grade High Conductive Aluminum alloy of appropriate cross section as per rating.The main bus bar shall run throughout the panel of rating as main incomer rating. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure the bear the jerks of short Circuit of 50kA for panels having ACB as Incomer & 36kA for panels having MCCB Incomers. Panel shall be constructed in fully Segregated Compartment Design for Each Feeder as per 3b construction Format. The Panel shall be completed in all respect as per IS: 8623 Part-2&3. There shall be Separate Metering Compartment for incomer metering and outgoing metering.All Incomer Feeders shall be provided with Multifunction Metering along with Phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. and all Outgoing Feeders 100A & above shall be provided with 3 phase Ammeter along with phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. The Feeders above shall be provided ac accommodated all Measuring Instruments shall be Digital type & all Indicating Lights shall be LED type.
Wiring shall be done from 1100V Grade PVC Insulated copper flexible wire. All ACB shall be Electrically operated Draw-out type with Microprocessor Based O/L, S/C & E/F Release of Breaking/ Withstand Capacity (ICU/ICs/Icw) 50kA or more All MCCB shall be Thermal Magneetic/Microprocessor with O/L & S/C Protection along with Required Spreaders & Extended Rotary Handle with pad Locking facility of Breaking capacity (ICU/ICS) 36kA or more All MCB shall be Thermal 10kA 'C' Curve. Cubicle type switch board shall be Cat-A and B only.
-
-
-
... More
INCOMING 1250 ACB-1 NO/415 VOLT AND OUT GOING 630 AMP MCCB-2 NO ,200 AMP MCCB-1 NO
1
-
-
... More
Supply & Installation of 630 Amp /415 volt ,50 HZ off load changeover switch with making Electric connection. For Main academic building
1
-
-
... More
Supply & Installation of 300 Amp rewirable porcelene kit kat with fuse carrier with making Electric connection. For Main academic building
3
-
-
... More
Supply, Installation, Testing amd Commissioning of LT Panel vermin proof floor mounting , M.S. channel base with bottom and Fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus Bar of panel shall be of Electrical grade High Conductive Aluminum alloy of appropriate cross section as per rating.The main bus bar shall run throughout the panel of rating as main incomer rating. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure the bear the jerks of short Circuit of 50kA for panels having ACB as Incomer & 36kA for panels having MCCB Incomers. Panel shall be constructed in fully Segregated Compartment Design for Each Feeder as per 3b construction Format. The Panel shall be completed in all respect as per IS: 8623 Part-2&3. There shall be Separate Metering Compartment for incomer metering and outgoing metering.All Incomer Feeders shall be provided with Multifunction Metering along with Phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. and all Outgoing Feeders 100A & above shall be provided with 3 phase Ammeter along with phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. The Feeders above shall be provided ac accommodated all Measuring Instruments shall be Digital type & all Indicating Lights shall be LED type. Wiring shall be done from 1100V Grade PVC Insulated copper flexible wire. All ACB shall be Electrically operated Draw-out type with Microprocessor Based O/L, S/C & E/F Release of Breaking/ Withstand Capacity (ICU/ICs/Icw) 50kA or more All MCCB shall be Thermal Magneetic/Microprocessor with O/L & S/C Protection along with Required Spreaders & Extended Rotary Handle with pad Locking facility of Breaking capacity (ICU/ICS) 36kA or more All MCB shall be Thermal 10kA 'C' Curve. Cubicle type switch board shall be Cat-A and B only.
-
-
-
... More
INCOMING 630 4 POL AMP MCCB-1 NO AND OUT GOING MCCB 200 AMP-2 , ,150 AMP MCCB-2 100AMP MCCB-1
1
-
-
... More
INCOMING 200 4 AMP MCCB-1 NO AND OUT GOING 100 Amp MCCB -2 no
2
-
-
... More
250KVAR CAPACITOR PANEL INCOMING -1 Nos. 500 Amp TP MCCB 36KA 1 Nos. BUSSBAR 630 Amp TPN busbars of aluminium alloy as per SLD, OUTGOING 12 stepped Automatic Power Factor Correction relay (APFC relay).1 Nos. 250 Amp TP MCCB.4 Nos. 63 Amp TP MCCB.1 Nos. 32 Amp TP MCB.1 Nos. 25 Amp TP MCB.5 Nos. 16 Amp TP MCB.
1
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
190
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
190
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, V, complete as required.
18
-
-
... More
Supply and Fixing of inverter wiring Point with 1.5 sq mm frlsh pvc insulated copper conductor wire
354
-
-
... More
Supply & Installation of 40/63 Amp /220 volt DOUBLE POL ,MAIN SWITCH with making Electric connection.
5
-
-
... More
Supply & Installation of 40/63 Amp /415 volt 50 HZ HBC FUSE TYPE 3 POL AND NEUTRAL ,MAIN SWITCH with making Electric connection.
6
-
-
... More
Supply & Installation of 100 Amp /415 volt 50 HZ HBC FUSE TYPE 3 POL AND NEUTRAL ,MAIN SWITCH with making Electric connection. For Main academic building
1
-
-
... More
Supply & Installation of 100 Amp /415 volt 4 POL ,50 HZ off load changeover switch with making Electric connection. For Main academic building
2
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC / Hume / Metal pipe` as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.
-
-
-
... More
10 sq. mm X 4 CORE core
150
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.
-
-
-
... More
4 X 10 sq. mm (32mm)
12
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC / Hume / Metal pipe` as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.
-
-
-
... More
16 sq. mm X 4 Core
140
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.
-
-
-
... More
3½ X 16 sq. mm (28mm)
12
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC / Hume / Metal pipe` as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.
2 CORE X 16 sq. m core AL ARMOURED CABLE
360
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.
-
-
-
... More
2X 16 sq. mm (32mm)
24
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC / Hume / Metal pipe` as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc.
-
-
-
... More
35 sq. mm 3-1/2 core
100
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 35 sq. mm (32mm)
6
-
-
... More
FIRE FIGHTING WORK
-
-
-
... More
SITC of Automatic Controll panel of terace pump of required H.P (L& T MAIN SWITCH)
1
-
-
... More
SITC of ZINCALIUM TERRACE TANK 5000 LTR CAPACITY
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: 450 lpm at 35 m Head (Terrace Pump)
1
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
100 mm dia
200
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
100 mm dia
3
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as
required.
4
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
100mm dia
1
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade
as required.
1
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line
including connection etc. as required.
1
-
-
... More
Providing & fixing flow switch in following sizes M.S.
pipe including connection etc as required.
-
-
-
... More
100 mm dia
1
-
-
... More
Providing and fixining gun matel ball valve
6
-
-
... More
Supplying and fixing single headed Gun metal internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
6
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe Gun Metal type with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636
(type-A) as required :
12
-
-
... More
Supplying and fixing first-aid Hose Reel 30m long with MS construction spray painted in post office red, conforming to IS 884 complete with the following as
required.
6
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
required :
-
-
-
... More
Gun metal
6
-
-
... More
Supplying and fixing of 2 way-100 mm dia M.S. Pipe fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
2 way-100 mm dia M.S. Pipe
1
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line
including connection etc. as required.
4
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
-
-
-
... More
100 mm dia
4
-
-
... More
Providing and fixing weather proof standard hose cabinet (900mm x 750 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5mm thick M.S. sheet having central opening glazed door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint and housing 2 Nos. canvas hose pipe and branch pipe as required. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The words “Fire Hose Cabinet” to be painted on the box. LIFE GUARD/ EQUIBLANT
6
-
-
... More
Providing and fixing Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 2100 mm high x 1000 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “Fire Hose Cabinet” to be painted on the
box.
6
-
-
... More
Providing and fixing 6 Kg clean agent or ABC extinguisher
with IS: 2171. (ISI marked)
8
-
-
... More
Providing and fixing 4.5 Kg weight CO2 type fire extinguisher
with IS: 2171. (ISI marked)
8
-
-
... More
Providing and fixing fire man axe.
6
-
-
... More
D.G SET
-
-
-
... More
Supplying, installatin, testing and commissioning of silent type 58.5 KVA kirlosker Make DG sets, controll Panel, Bus ducting, where required, DG Set enclosure room sound insulation /ventilation/smoke exhaust as required, fuel tank / piping DG set exhaust piping/exhaust chimney and 12 volt required AH Battery as per CPCB -4 norms,
1
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc. size 50 sq mmx 3,1/2 core AL Armoured.
60
-
-
... More
Earthing with copper earth plate 6000×600×3mm thick including accessories and providing masonry enclousre with cover plate having locking arrangement and watering pipe of 2.7 Metre long etc. (But without charcoal/coke and salt) as required
2
-
-
... More
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt) as required.
2
-
-
... More
providing and fixing 25 ×5 mm copper strip on surface or in recess for connections etc as required
20
-
-
... More
CCTV WORK
-
-
-
... More
Supplying, installing, testing and commissioning of 24 port CAT6 jack panel
loaded as per the connections required in jack panel.
3
-
-
... More
Supplying, installing, testing and commissioning of I/O(Information outlet )
for CAT6 Cable termination
30
-
-
... More
Supplying, installing, testing and commissioning of 6 U wall mount rack with
fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts.
3
-
-
... More
Supplying, installing, testing and commissioning of 24 10/100/1000BASE-T
PoE-plus
3
-
-
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged Dome Camera, 1/3" CMOS, 4 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR with Scene Adaptive Control, Min. Pixels 2688 × 1520, Shutter Speed 1/3 - 1,00,000; Adavance Video Compression technology such as H.265 &
H.264 High Profile , Triple stream, 2.7–13.5 mm 5X motorized focus & zoom lens, BLC, HLC, 3DNR, Minimum Edge Intelligence Video Analytics : Motion Detection, Video Tampering, Face Detection, SD Card Error, SD Card Capacity Warning, Audio Detection, Object Abandoned, Object Missing, Tripwire/Intrusion; Loitering; Privacy Mask, 4 IR LEDs Smart IR with upto 50m IR distance, AES-256, SSH/Telnet closed, PCI Data Security Standard compliance; Dual channel Audio G.711a/ G.711Mu/ AAC/G.726, 128GB SD card support, Alarm: 2 In/ 1out, PoE Class 4 (802.3 at) and 12V DC, support aux. power supply of 2W , 12VDC for powering low power devices such as strobe light/hooter, IP 67, IK 10 vandal proof, Die-Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S, G and Q compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55032) , FCC
Part 15 & RoHS compliant. Make: Mobotix/ Avgilion/Flir/Axis/Honeywell/Bosch
10
-
-
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/3" CMOS, 4 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR with Scene Adaptive Control, Min. Pixels 2688 × 1520, Shutter Speed 1/3 - 1,00,000; Adavance Video Compression technology such as H.265 &
H.264 High Profile , Triple stream, 2.7–13.5 mm 5X motorized focus & zoom lens, BLC, HLC, 3DNR, Minimum Edge Intelligence Video Analytics : Motion Detection, Video Tampering, Face Detection, SD Card Error, SD Card Capacity Warning, Audio Detection, Object Abandoned, Object Missing, Tripwire/Intrusion; Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, AES-256, SSH/Telnet closed, PCI Data Security Standard compliance, Hardware chipset for private key; Dual channel Audio G.711a/ G.711Mu/ AAC/G.726, 128GB SD card support, Alarm: 2 In/ 1out, Long Distance 3X PoE support upto 300m (300m @100Mbps) , PoE Class 4 (802.3 at) and 12V DC,support aux. power supply of 2W ,12VDC for powering low power devices such as strobe light/hooter, IP 67, IK 10 vandal proof, Die-Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S, G and Q compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55032) , FCC Part 15 & RoHS compliant. Make: Mobotix/ Avgilion/Flir/Axis/Honeywell/Bosch
12
-
-
... More
SITC of 32 channel Network Video StoragE NVR suitabe to access data from
any remote location including backup drive for 30days.
1
-
-
... More
Supply, Installation, Testing & Commissioning of CCTV Client Operator Station with 1 No.of 55” LED Display - Complete as per specifications &
preferred make. Make: SONY/Samsung/LG
1
-
-
... More
Supply, Installation, Testing & Commissioning of LCD CCTV Joystick Keyboard, LAN POE Connection, 3-Axis Propotional Control, 20 Functional Keys, UL, CE, FCC Listed, Make: Mobotix/
Avgilion/Flir/Axis/Honeywell/Bosch
1
-
-
... More
Supplying, installing, testing and commissioning of HDMI to HDMI Cable.
2
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench,
complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
150
-
-
... More
Supply installing testing & commissioning of out door type junction box, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required suitable for mounting of 2 nos. 5/6Amp Switch &
Sockets.
1
-
-
... More
SOLAR SYSTEM
-
-
-
... More
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/ Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/ GI structure of suitable strength with following components complete as required:-
15
-
-
... More
a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.
-
-
-
... More
b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.
-
-
-
... More
c) Data Monitoring System complete with accessories.
-
-
-
... More
d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.
-
-
-
... More
e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.
-
-
-
... More
EXTERNAL STREET LIGHT
-
-
-
... More
Supply and fixing of 8 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 135 mm & Base plate 16 mm thick) having 3 mm, thickness with single arm bracket length of 1 mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect.
12
-
-
... More
Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 75 Watt. to 90 Watt and Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including lABOUR 9000-10800 system lumens, High Power LED with lenses, 120 Lm/W, PF0.95, THD 10% at full load, CRI 70,, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, with warrantee 5 years,CAT-AAA
12
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc. CABLE SIZE-6 SQ MM X 2 CORE
376
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top as directed by enginer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor with clamps etc. CABLE SIZE-16 SQ MM X 4 core for main panel to feeder panel
135
-
-
... More
Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 OUT PUT SUITABLE FOR THREE PHASE SUPPLY
2
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.
with charcoal/ coke and salt as required.
6
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut
bolt & spring washer spaced at 50mm)
50
-
-
... More
S/W of 2C × 2.5Sq mm Cu conductor filexible wire in existing pole complete in all respect.
96
-
-
... More
S/F of 40 Amp 4 way heavy duty cadmium plated copper conector with end plate complete in all respects.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%