Public Works Department Tender

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 9.20.2) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. ( DSR No. 9.127.2) 1.0 mm thick (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. (DSR 9.51.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand (DSR 6.4.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

12mm thick plaster in 1:4 with cement & fine sand . (DSR 13.1.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

40mm Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR 8.31) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cem. (DSR 13.41.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Finishing walls with Acrylic Smooth exterior paint of required shade :( Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. (DSR 13.111.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.( DSR No. 13.91) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( DSR No. 13.80) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : ( DSR No. 13.99.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR NO. 17.2.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (DSR No.-17.7.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes having thermal stabilitiy for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing tha pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvant cement and testing of joints complete as per direction of enginieer in charge. internal work exposed on wall . 15mm nominal outer dia pipes (DSR NO. 18.7.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Same as above but 20 mm nominal outer dia pipes. (DSR NO. 18.7.2 (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Same as above but 25 mm nominal outer dia pipes. (DSR NO. 18.7.3) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DSR NO. 18.51.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.49.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (DSR No. 18.53.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm length 15 mm nominal bore (DSR NO. 18.21.2.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and placing on terrace polythylene water storage tank ISI: 12701 Marked with cover and suitable locking arragemant and making necessary hole for inlet, outlet and overflow pipes without fittings and the base support for tabk. (DSR No. 18.48) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR NO. 10.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black f inished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thic (DSR No 14.91.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)