Public Works Department Tender

Sand Filling in Foundation Trenches as per Drawing & Technical Specification (As per Morth Sl.N. 15.03) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (PCC Grade M15) As per Morth Clause 15.11 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Plain/Reinforced Cement Concrete in Sub-structure complete as per Drawing and Technical Specifications. (PCC Grade M20) As per Morth Sr. No. 15.11 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC Grade M25) As per Clause 15.11 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Plain/Reinforced Cement Concrete for wall & slab etc. complete as per Drawing and Technical Specifications. (RCC Grade M25) As per Morth Sr.No. 15.12 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. (As Per Morth Sl. 9.07) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Supplying, fitting and placing Mild steel reinforcement complete in sub-structure as per drawing and Technical Specification. (As per Clause 13.07) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification. As per Clause 15.16 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. As per Clause 15.18 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and fixing of 110 mm dia partially perforted PVC pipe of approved quality in abutment, Raft foundation (to release pore pressure of soil) and wing wall for weep holes i./c suppyly of all material, labour, T&P and all sundries for proper completion of the work as directed by Engineer-in-charge & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Drainage Spouts complete as per drawing and Technical specification. As per Morth Speciation No. 2705 S.I. 14.09 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification (As per Morth Sl.N. 15.23) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. As per Clause 16.01 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Dewatering work of underground water as well as surface water with the help of diesel engine pumping set during earth work in excavation of foundation for laying lean concrete and brick work in foundation including cost of Boring charges @ 5 mtr c/c distance (or as required), hire chargeg of pumping set, fuel charges, labour and other T&P including cost of operation as per requierment at site & as directed by the Engineer-in-charge & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Supply, Laying & Fixing NP-3 Hume Pipe 1000 mm dia & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Rate is including dismantling & disposing of recovered material)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Carted earth) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Rate is including dismantling & disposing of recovered material)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Rate is including dismantling & disposing of recovered material)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Carted earth) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Including cost of Bitumen)

Providing and laying 50 mm thick Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Including cost of Bitumen)

Providing and laying 30 mm thick bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. (Including cost of Bitumen)

Road Delineator Delineator: Supply & Fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be concealed so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtain clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour T&P. transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge.. (CH-27, Sl. 1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.