Public Works Department Tender

Providing and applying seal coat type "C" comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kN Static roller and finishing to required level and grades as per Technical Specification Clause 510.(excluding G.S.T.)

(Construction of C.C. Pavement) Construction of un-reinforced, dowel jointed at expansion and construction joit only, plain cement concrete pavement,thikness as per design, over a prepared sub base with 43 grade cement or as per clause 1501.2.2 M30@ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity appropriate weight batcher using approved mix design,laid in approved fixed side formwork(steel channel,laying and fixing of 125 micron thick polythene film,wedges ,steel plate including leweling the form work as per drawing),spreading the concrete with shovels,rakes,compacted using needle,screed and plate vibrators and finished in continious oparation including provision of contraction and expansion, construction joints,applying debonding strips,primer,sealant, dowel bar,near approaches to bridges / culvert and construction joints,admixtures as approved,curing of concrete slabs for 14 days,curing compound(where specified) and water finishing to lines and grades as per drawing and technical specification Clause 1501 (excluding G.S.T.)

Eearthen shoulders with approved material obtained from borrow pits with all lifts and, transporting to site, spreading, grading to required slope and compacted to Imeet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. .(excluding G.S.T.) (excluding G.S.T.)