Public Works Department Tender

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2022 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2022 & proof of the same in form of government report shall be uploaded with quoting tender.( Rates are including all Taxes but Excluding GST.) 60 cm equilateral triangle with diffinitation plate size (20 cm x 60)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2022 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2022 & proof of the same in form of government report shall be uploaded with quoting tender.( Rates are including all Taxes but Excluding GST.) 60 cm Circular with diffinitation plate (20 cm x 60 cm)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2022 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2022 & proof of the same in form of government report shall be uploaded with quoting tender.( Rates are including all Taxes but Excluding GST.) 80 cm x 60 cm rectangular with diffinitation plate (20 cm x 60 cm) - Bus Stop

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2022 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2022 & proof of the same in form of government report shall be uploaded with quoting tender. ( Rates are including all Taxes but Excluding GST.) 90 cm high Octagon - STOP

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2022 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2022 & proof of the same in form of government report shall be uploaded with quoting tender. ( Rates are including all Taxes but Excluding GST.) 30 x 90 cm (Left/Right) Object Hazard

Providing and erecting direction and place identification retro-reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E-In- Charge. ( Rates are including all Taxes but Excluding GST.) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage.

Suppy & Fixing of pavment Makers (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly aderent plotting compound. The housing shall contain prismatic two glass coverd prismatic reflective face to reflect light I/C all tax. ( Rates are including all Taxes but Excluding GST.) (ch.-26, SI No.- 5)

The solar cateye shall be produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree uniform smooth illumination through light tube. The marker shall also have high reflective plastic lenses for conspicuity in passive mode and dual shanks for improved road presence. These markers are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter 136 4 mm. The solar stud/ cateye shall be tested for water ingress as per IP 65 standards & IP 68 standard & compressive strength of 13635 Kg tested in accordance with ASTM D4280 and test report shall be submitted at the time of bidding of lender. somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The rate shai include all materials, labour, equipments, fabrication, transportation, erection installation and incidentals all complete as per direction of the Engineer-in-Charge(ch.-26, SI No.- 15) ( Rates are including all Taxes but Excluding GST.)

Providing and erecting a "W" metal beam crash barmer comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 (ch.-26, SI No.- 26) ( Rates are including all Taxes but Excluding GST.)

Tack Coat on Granular surfaces treated with primer : Providing and applying tack coat with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. C ( Rates are including all Taxes but Excluding GST.)

Dense Graded Bituminous Macadam Grading 2: Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. ( Rates are including all Taxes but Excluding GST.)

Bituminous Concrete Grading 2: Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Rates are including all Taxes but Excluding GST.)