Public Works Department Tender

Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. excluding Royallity. Wherever applicable for small work or Abadi area. (Where machine can not reach/move) including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of borrow pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge with 1 KM Cartage. excluding Royallity. Wherever applicable for small work or Abadi area. (Where machine can not reach/move) including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 (M-30 Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine.Technical Specification Clause 1501 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move) including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Plain/reinforced cement concrete (M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supply of Informatory Board made of 18 gauge M.S. Sheet & frame of board angle iron of 40 x 40 x 6mm complete board size 3' x 4' and two no. post of board 10' (3 meter.) long of angle iron 40 x 40 x 6 mm with suitable whole-fast of angle iron of cross flat iron 25 x 5 mm with board. Complete board with primer coat & paint with in red oxide paint complete including letter writing on the board etc. including cost of, all material, Bitumen, labour, T&P, royality , all taxes and labour cess complete. But excluding GST.