Public Works Department Tender

Providing and laying seal coat Type - C for sealing the voids in a bituminous surface using bitumen VG-10 @0.65kg per sqm and 6.7mm stone grit @0.009 cum per sqm, laid to the specified levels, grade and cross fall as per Technical Specification Clause 510. (Including All Taxes, Labour cess , Royalty etc. but Excluding GST for proper completion of Work.)

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), Coarse and fine aggregates cnforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, cmpacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 - days. (Including All Taxes, Labour cess , Royalty etc. but Excluding GST for proper completion of Work.)