Public Works Department Tender

Providing and fixing of HAZARD MARKER retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting typr 1V 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing, The retro reflectine sheeting shell be lested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quating tender, as per Lucknow SOR signage 2020. SL.no 18 (xi) page no 57, Morth 801. Size 45 cmx 90 cm to way object Hazard. (Hazard Marker (Left & Right))

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Providing and fixing of Standard M.S. Delineator made of Mild steel with pure polyestre power coating with the minimum thickness of power coating of not less 40 microns for protection against corrosion, the surface should be conceated so that there should not be any exposed surface without powder coating, Alternatively these metal guide poles can be concealed with termoplastic body. The posts shall have lan ellipsoldal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored on to the roung, Mild Steel guide poles shall conform to Type XI sheeting specification as per IRC 67 and ASTMD 4956, which would be ensure to obtain clear visibility of the road alignment during right time. The Retro reflective sheeting shall be tested of A certificate of having the sheeting tested for coefficient of retro reflection, day time colour and luminance shrinkage, flexibility, liner removal adhesion, impact resistance weathering gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international /Government Laboratory/ Institute by the manufacture of the sheeting and in case the certificate is obtained form international condition, it should also be obtained from condition with 3 years of launching of product by the manufacture in abroad alternatively, a certifiacte confirming to ASTM specification (D4956-09) on artificial accelerated weathering requirement from a reputed laboratory in india can be accepted provisionally is such a situation the Employer, Client/ if so desires could seek for a performance quaratee which would be release after receipt of certificate metting the requirement of three years outdoor weathering of the sheeting as per IRC 67, 2012 & proof of the same report shall be uploaded which quoting tender, The rate shall inculde all materials labour, T&P, transportation installation and incidentals all complete as per E/I/

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Supply, fixing & eraction of built up Cantilever Structure of 12 m span comprising of One vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90 mm of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 (cement coarse sand and 40 mm gauge S.B) RCC with 1:2:4 (cement, coarse sand and 20 mm stone grit) including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect. The rate shall include cost of design, febrication, supply, transportation, Local shfting Erection of Signage structure using crane, Inclusive of all taxes, royalty VAT etc. All T&P machine, material and labour required for proper completion of work as per direction of Engineer-in- Charge

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Supply, fixing & erection of built up Cantilever Structure of 6.00M span comprising of one vertical post of 6.00M height made up of 300 mm N.B. heavy class M.S. pipe as vertical member welded with 10mm M.S. plate at top & 12 mm M. S. plate at bottom. The horizontal Truss shall comprise of 50 mm. dia heavy class M.S. pipe and 40 mm dia heavy M.S. pipe as bracing & 10 mm M.S. Plate at bottom for fixing to vertical post as per structure design & drawing with one coat of steel primer and two coats of synthetic enamel paint. The work includes construction of RCC Foundation of size 0.90x0.90M of required depth as per site condition for built up structure including Earth work in excavation, 100 mm thick Lean Concrete in 1:4:8 cement, coarse sand and 40 mm gauge stone ballast, R.C.C. with 1:2:4 Cement, Coarse Sand and 20 mm stone grit, including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provisions of structure design including cost of reinforcement & shuttering. The lateral, vertical clearances and complete installation work shall be as per relevant clauses of MORT&H specifications Section 800 and IRC-67 2012 complete in all respect. The Rates shall include cost of design, fabrication, supply, transportations, Local Shifting, Erection of Signage. (LKO SOR No. Ch. 26 Si.No. 4)

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Providing & erecting signs board with a corrosion resistant made of 2 mm thick aluminium sheet of 4mm thick ACP sheet face to be fully covered with microprismatic full cube technology type-XI grade retro reflective sheeting shall be fully processed on base aluminium substrate and also fixed on the angle frame on 35x35x5 mm as per IRC 67 with vertical and laterial clearance giving in para 80.2 & 802.3 and clause 801.3 MORTH (Double side)

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Supply and fixing of Pavement Maker (Cat Eye) Type X-ASTMD-4956-04 Avery Dennision/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light I/C all tax etc. complete. (S.NO.5 MORTH 804(8.35) page no,54

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Providing and fixing of Single CHVERON retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro reflectine sheeting shell be lested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quating tender, as per Lucknow SOR signage 2020. SL.no 18 (ix) page no 57, Morth 801 (Double chevron)

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 -2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro reflectine sheeting shell be lested for 3 year outdoor weathering test in indian conditions as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quating tender, as per Lucknow SOR signage 2020. SL.no 18 (V) page no 57, Morth 801 (8.4) Size 60x45 nn rectangular with diffiniation plate (20 cmx60 cm)

School, Hospital & Abadi portion and link roads size 60x45mm rectengular with fiffinilation plate (20cmx6xcm) Ch. 0.000 to 9.000

School, Hospital & Abadi portion and link roads size 60x45mm rectengular with fiffinilation plate (20cmx6xcm) Ch. 9.000 to 26.200

Speed limit with size 60mm circular with diffinilation plate (20 cm x 60 cm) Ch. 0.000 to 9.000

Speed limit with size 60mm circular with diffinilation plate (20 cm x 60 cm) Ch. 9.000 to 26.200

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810. near to pound (LKO SOR No. Ch. 26 Si.No. 27)

Ch. 0.000 to 9.000

Ch. 9.000 to 26.200