Public Works Department Tender

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cem. (DSR 13.41.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Finishing walls with water proofing cement paint of required shade. Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coa. (DSR 13.109) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : ( DSR No. 13.99.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. With cement mortar 1:4 (1cement: 4 coarse sand) ( DSR No. 14.1.2) Exculding G.S.T. (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed of class Teak wood and fixed in position: ( DSRo. 9.1.1) Chapter 9 (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats (DSR No. - 14.2.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (DSR No.- 14.85) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 9.20.2) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. ( DSR No. 9.127.2) 1.0 mm thick (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR NO. 17.2.1)

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes having thermal stabilitiy for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing tha pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvant cement and testing of joints complete as per direction of enginieer in charge. internal work exposed on wall . 15mm nominal outer dia pipes (DSR NO. 18.7.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Same as above but 20 mm nominal outer dia pipes. (DSR NO. 18.7.2) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Same as above but 25 mm nominal outer dia pipes. (DSR NO. 18.7.3) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DSR NO. 18.51.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.49.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (DSR No. 18.53.1 ) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.(10 litre capacity - White) (DSR N0. 17.18.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm length 15 mm nominal bore (DSR NO. 18.21.2.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Supply and fixing of 10cm internal dia PVC pipe, 6kg/per sq.cm. preasure make complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S clamps 2.5cm x3mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc Required for completion of the work and also includkng repair of plaster pointing etc. If damaged during fixing of the pipe.si-730A (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and placing on terrace polythylene water storage tank ISI: 12701 Marked with cover and suitable locking arragemant and making necessary hole for inlet, outlet and overflow pipes without fittings and the base support for tabk. (DSR No. 18.48) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black f inished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thic (DSR No 14.91.1) (Including all T&P, Labour, Material, Royalty Tax but excluding GST)