Public Works Department Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date28 Dec 2024
Closing Date6 Jan 2025
Tender Amount₹ 27,50,00,000
Costs
EMD
₹ 37,50,000Document Cost
₹ 2,714Tender Fee
Refer Documents
Summary
Construction Of Type-3 Residential Multi Story Building (total 88 No. Residences) After Demolition Of 18 Old Damaged Mla Suits, 41 Fourth Class Damaged Residences, Damaged Pump House
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDBL_987121_1Bid Award Id
ViewTender No
3550/131(1)M-39/2024, Dt. 20.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Same as above Item but for 4.50 TO 6.00 Mtr DSR No.2.8.1+2.26.1*2
18.5
506
9362.85
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. DSR Item No.2.27
177.8
1677
298277.28
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. DSR Item No-4.1.8
539.1
5381
2900951.01
... More
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diaMtr. holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration DSR. Item No.-2.35.3.1
900.5
244
220532.45
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level in M-30. DSR Item No.-5.33.1.2
1211.1
7627
9237665.25
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level M-30 DSR Item No.5.33.2.2
1198.9
7908
9481380.76
... More
Same as above 6 but for R.C.C./ B.M.C/ R.M.C. work for 5th to 8th Floor DSR Item No.5.33.2.2+5.38
966.3
8189
7913417.22
... More
Same as above itenm but for Ninth to Eleventh floor+Terrace Floor DSR Item No.5.33.2.2+5.38x2
896.9
8470
7597012.07
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item No.-6.1.2
73.3
5634
413001.52
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size) DSR Item No.-4.10
39.6
324
12850.2
... More
Providing & applying a coat of residual petroleum bitumen of grade of Vg-10 of approved quality using 1.7 kg per square Mtr. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. DSR Item No.-4.13
34.3
115
3958.22
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item No.-6.4.2
993.5
7193
7146444.2
... More
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for Nos. four floors or part there of by mechanical means.(5th to 8th Floor). DSR Item No.-6.4.2+6.5
870.2
7327
6376042.42
... More
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for Nos. four floors or part there of by mechanical means.(9th to 11th + Terrace Floor). DSR Item No.-6.4.2+6.5x2
785.7
7460
5862029.13
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) DSR-Item No.6.13.2
1629.4
887
1446418.38
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)+Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means. DSR-Item No.6.13.2 (5th to 8th Floor). DSR Item No.-6.13.2.+6.14
1573.6
899
1415453.2
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) DSR-Item No.6.13.2 (9th to 11th + Terrace Floor). Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means.DSR Item No.-6.13.2+6.14x2
1180.2
911
1075634.28
... More
Extra for providing and placing in position two Number 6mm dia. M.S. bars at every third course of half brick masonry. DSR. Item No.6.15
4414.9
82
365112.23
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-550 or more or more DSR Item No.-5.22.6
5811.4
8519
49510803.44
... More
Thermo-mechanically treated bars of grade fe-550D or more Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. DSR Item No.5.22A.6
52.5
8519
447279
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) DSR Item No.-13.5.1
294.5
325
95771.4
... More
12 mm cement plaster of mix : in 1 cement : 6 coarse sand DSR Item No.13.4.2
40599.5
271
11018704.3
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) DSR Item No.13.5.2
227
312
70892.1
... More
Add for plaster drip course/ groove in plastered surface or moulding to r.c.c. projections. DSR Item No.5.30
10746.3
61
665195.97
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR Item No.11.41.2
4892.9
1227
6004077.59
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.. Size of Tile 600x600 mm DSR Item No.-11.46.2
824.8
1282
1057476.08
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm DSR Item No.-8.2.2.2
242.8
4057
985136.72
... More
25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : DSR Item No.-11.26.1.
2994.9
1539
4609151.1
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete DSR Item No.11.27
427.7
1860
795564.77
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR. Item No.11.37A.
585.3
878
514420.17
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete DSR 8.31
2672.1
1001
2676375.36
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. DSR. Item No.11.3.1
352.5
485
170997.75
... More
Providing and fixing of Flush doors commercial quality conforming to I.S. 2202 part-I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles spring fitting with necessary screws to be supplied departmentally. 35 mm thick Single leaf D.S.R.-Item No.9.21.1
1082.6
1890
2046114
... More
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge. DSR Item No.9.145
907.6
603
547645.84
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ astic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). DSR Item No.9.118.1
290.8
2345
682071.4
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR Item No.10.15.1
16652.1
154
2566088.61
... More
DSR Item No.9.147A.4.1
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 Mtr.).DSR Item No.-9.147.A4.1
651.9
8684
5661295.17
... More
Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.Using R2 series with frame (39mm & above ) x (39mm & above) & sash /mullion (39mm & above) x (60mm & above). (Height upto 1.2 Mtr.) DSR Item No.-9.147.D1.2
123.5
9680
1195566.45
... More
Providing and fixing fly proof Stainless steel grade 304 wire gauge to windows and lerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete.With 12 mm mild steel U beading DSR Item No.-10.29.2
775.5
895
694382.7
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters Kiln seasoned and chemically treated hollock wood DSR Item No.9.27.1.1.2
619.7
2843
1761869.07
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (a) Door chaukhats DSR Item No.-14.2.1
535
1408
753333.5
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR Item No.13.41.1
31083.1
146
4556782.46
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 0.9 kg/ 10 sqm). PWD.13.47.1
14406.6
135
1946331.66
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR Item No.13.80
45489.7
123
5604331.04
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. DSR Item No.9.82
713
96
68448
... More
Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm (MR)
1428
400
571200
... More
P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. (a) 300 mm x 10mm (MR).
1426
300
427800
... More
Same as above but (b) 200 mm x 10mm (MR).
1422
250
355500
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm DSR Item No.9.165.1
2844
94
267620.4
... More
DSR Item No.22.7.1
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
996.5
1330
1326042.55
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding DSR Item No.9.48.1
14827.7
173
2565192.1
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR Item No.13.62.1
4825.8
178
862370.46
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes DSR Item No.10.30.2
835.3
1098
917242.93
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) 30 mm thick pre laminated PVC door shutters DSR Item No.9.168
658.9
2234
1472575.61
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm DSR Item No.9.79.2
352
281
99193.6
... More
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. DSR Item No.9.91
352
119
41993.6
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm DSR Item No.9.92.1
704
182
128480
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type). DSR Item No.9.114.2
704
31
22035.2
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia. DSR Item No.9.46.3
1306.8
415
542452.68
... More
S/F of cinder for sunken portion of toilets & kitchen as per directions of E/I.(MR)
513.8
2000
1027600
... More
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR Item No.22.5
3130
487
1525562
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. DSR Item No.10.28
9414.7
610
5743908.47
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete. DSR Item No.5.9.1
328
309
101581.6
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Columns,Pillars, Piers, Abutments, Posts and Struts. DSR Item No.5.9.6
8182.2
759
6212744.46
... More
Same as above Item No.61 but for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR Item No.5.9.2
76.1
665
50644.55
... More
Same as above Item No.61 but for Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR Item No.5.9.5
7682.9
581
4469142.93
... More
Same as above Item No.61 but for Suspended floors, roofs, landings, balconies and access platform. DSR Item No.5.9.3
10803
732
7912117.2
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase DSR Item No.12.21.1
456.3
241
109968.3
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. DSR Item No.4.1.3
231.5
6223
1440763.4
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. DSR Item No.17.2.1
176
5146
905854.4
... More
Providing and fixing toilet paper holder : C.P. brass DSR Item No.17.34.1
176
634
111724.8
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 Mtr. long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR Item No.17.16.A
176
275
48540.8
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DSR Item No.17.7A
176
3128
550633.6
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. DSR Item No.17.22A
176
817
143862.4
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. DSR Item No.17.72
176
183
32243.2
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. DSR Item No.18.65
176
88
15488
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR Item No.17.31
176
1270
223555.2
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink)15 mm nominal bore DSR Item No.18.53.1
1056
453
479001.6
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore and 45mm Length. DSR Item No.18.21.2.1
880
77
67936
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diaMtr.. DSR Item No.18.22.1
176
153
26963.2
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia. DSR Item No.17.22B
176
5482
964972.8
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. DSR Item No.17.73.2
176
560
98560
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 200 mm. DSR Item No.17.10.1.3
88
5655
497657.6
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia DSR 17.28.1.1
88
82
7216
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal bore. DSR Item No.18.49.1
176
400
70452.8
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore. DSR Item No.18.51.1
88
631
55536.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes. DSR Item No.18.8
1058.9
393
416359.48
... More
Same as above Item but for 20 mm nominal outer dia Pipes. DSR Item No.18.8.2
2129.6
424
904228.16
... More
Same as above Item but for 25 mm nominal outer dia Pipes. DSR Item No.18.8.3
96.8
495
47954.72
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal bore. DSR Item No.18.7
55.2
264
14605.92
... More
Same as above Item but for 25 mm nominal bore. DSR Item No.18.7.3
110.4
317
35018.88
... More
Same as above Item but for 32 mm nominal bore. DSR Item No.18.7.4
496.8
409
203538.96
... More
Same as above Item but for 40 mm nominal bore. DSR Item No.18.7.5
220.8
555
122588.16
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall 65 mm nominal bore (i/c two coat of synthetic enamel paint). DSR Item No.18.8.5
220
915
201410
... More
Same as above Item but for 80 mm nominal bore (i/c two coat of synthetic enamel paint). DSR Item No.18.8.6
33
1054
34798.5
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 40 mm nominal bore (NSR) DSR Item No.18.13.1
32
720
23049.6
... More
Same as above Item but for 50 to 80 mm nominal bore. DSR Item No.18.13.2
5
1410
7051.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain 20 mm nominal bore. DSR Item No.18.17.1A
88
426
37532
... More
Same as above Item but for 25mm nominal bore. DSR Item No.18.17.1
88
491
43260.8
... More
Same as above Item but for 32mm nominal bore (including valve for PRV Station). DSR Item No.18.17.2
40
544
21788
... More
Same as above Item but for 40mm nominal bore (including valve for PRV Station). 18.17.3
40
652
26100
... More
Same as above Item but for 50mm nominal bore. DSR Item No.18.17.4
2
811
1622
... More
Same as above Item but for 65mm nominal bore. DSR Item No.18.17.5
1
1376
1376.2
... More
Same as above Item but for 80mm nominal bore. DSR Item No.18.17.6
3
2057
6172.2
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. DSR Item No.18.08
32
986
31568
... More
Providing , checking, storing, fixing in position of approved quality Screwed ends DIRECT ACTIVATED PRESSURE REDUCING VALVE WITH INTERNAL BALANCING LINE, SDT SEMI PILOT DIAPHRAGM OPERATED SCREWED FOR WATER / GAS /AIR. of the following sizes: The ratio of outlet pressure to inlet pressure should not be more than 1/3. 32mm dia. DSR (E&M) (N.S.R).
8
3755
30040
... More
Same as above but 40mm dia.
8
6140
49120
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 25mm dia. (NSR)
12
1290
15480
... More
Same as above Item but for 50mm dia.
6
1595
9570
... More
Same as above Item but for 65mm dia.
1
1745
1745
... More
Same as above Item but for 80mm dia.
7
2015
14105
... More
Same as above Item but for 100mm dia.
3
2525
7575
... More
Same as above Item but for 150mm dia.
7
3620
25340
... More
Same as above Item but for 200mm dia.
2
5080
10160
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Push Fit Coupler 110 mm dia DSR Item No.12.42.2.2
272
100
27390.4
... More
Same as above Item but for 110x110x110 mm DSR Item No.12.42.3.2
17
184
3143.3
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm dia DSR Item No.12.43.2
304
293
89163.2
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete DSR Item No.12.22
21
235
4947.6
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.Internal Toilet (Soil & Waste Pipe) 75 mm (NSR).
580.8
505
293304
... More
Same as above Item but for 110 mm (NSR).
638.8
715
456742
... More
Same as above Item Exposed on Wall (Soil & Waste Pipe) 110 mm
1754.4
715
1254396
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
110mm bend (NSR).
352
260
91520
... More
Same as above Item No.96 but for Bend without door (45°) 100mm.(NSR).
176
220
38720
... More
Same as above Item but for 75mm(NSR).
352
135
47520
... More
Same as above Item No.96 but for Y' Fitting without door 100mm (NSR).
176
415
73040
... More
Same as above Item but for Y' Fitting without door 75mm(NSR).
352
230
80960
... More
Same as above Item but for single TEE with out door 110mm (NSR).
176
365
64240
... More
Same as above Item but for single TEE with out door 75 mm(NSR).
352
225
79200
... More
Same as above Item No.96 but for Single Tee with door 110mm (NSR).
176
425
74800
... More
Same as above Item No.96 but for Reduced Tee with door 110mm x 75mm (NSR).
264
370
97680
... More
Same as above Item but for Coupler 110mm (NSR).
640
220
140800
... More
Same as above Item No.96 but for Clean Out Plug (COP) 110mm (NSR).
20
200
4000
... More
Same as above Item No.96 but for Vent Cowl 110mm (NSR).
40
90
3600
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal
32mm dia. pipe (NSR).
542
185
100270
... More
Elbow (90°) 32mm (NSR).
176
40
7040
... More
Elbow (45°) 32mm (NSR).
176
45
7920
... More
Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet) (NSR)
176
1220
214720
... More
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm (Toilet & Kitchen) (NSR)
264
1150
303600
... More
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid 150 mm nominal size square 100 mm diaMtr. of the inner hinged round grating (including balcony) DSR Item No.18.58.2.1
616
155
95788
... More
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating Nos. deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.All kind of soil Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia. DSR Item No.2.10.1.2
545
278
151564.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:100mm dia SW pipe. DSR Item No.19.2.1
171
762
130319.1
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Item No.5.2.2
23.9
8573
204901.87
... More
Centering and shuttering including strutting propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick. DSR Item No.5.9.21
40.1
665
26670.51
... More
Same as above but for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. DSR Item No.5.9.20
106.2
812
86266.26
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Construction of drain along with apron. (150 X 150 MM) (AR).
24.9
1025
25532.46
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Item No.5.3
24.2
9088
219948.96
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. DSR Item No.13.76
75.3
79
5978.82
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. DSR Item No.11.13.1
157.8
72
11424.72
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) DSR Item No.6.13.1
460.5
908
418502.4
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) DSR Item No.13.44.1
1597.7
92
147467.71
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. DSR Item No.10.31
987.1
103
101671.3
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 Mtr. openable length ( total length 90 m), having 50 nos rounds per 6 Mtr. length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ Mtr. (cost of M.S. angle, C.C. blocks shall be paid separately) Centering and shuttering including strutting, propping etc. and removal of form for : DSR Item No.16.53
385.9
296
114535.12
... More
Prepration and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth , dressing to camber and consolidating with road roller including making good undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 Mtr.s. DSR Item No.16.1
1731.7
123
214384.46
... More
Extra for compaction of earth work in embankment under optimum moisture condition to give at least 95% of the maximum dry density ( proctor density) DSR Item No.16.20
236
14
3374.8
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Item No.6.1.1
119.7
5822
696941.28
... More
Construction of granular sub base by providing close graded material conforming to specifications , mixing in mechanical mix plant at OMC , carriage of mixed material by ippers to work site, For all leads & lifts , spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density , complete as per specification and directions of engineering - charge with material conforming to grade II (size range 53mm to 0.075 mm ) having CBR value 25. DSR Item No.16.78.2
89.4
2310
206549.76
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approvedcolour design and pattern. DSR Item No.16.91.2
596.6
862
514388.52
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm DSR Item No.12.41.2
751
298
223873.1
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree 110 mm Bend Shoe (Plain) DSR Item No.12.42.5.2
38
118
4510.6
... More
Same as above Item but 110 mm Shoe DSR Item No.12.42.6.2
4
104
416.4
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diaMtr. and weighing not less than 440 grams. DSR Item No.12.44
4
43
172.8
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 Mtr. DSR item No.2.20.1
561
56
31920.9
... More
Same as above Item but Depth 1.5 to 3.00 Mtr. DSR Item No.2.20.2
264
64
17001.6
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.150 mm. dia. RCC Pipes DSR Item No.19.6.2
286
439
125697
... More
Same as above Item but 250 mm. dia. RCC Pipes DSR Item No.19.6.3
88
710
62541.6
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design DSR Item No.19.3.2
150 mm. dia. SW Pipe.
286
587
167882
... More
Same as above Item but 250 mm. dia. SW Pipes DSR Item No.19.3.4
88
803
70690.4
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With common burnt clay FPS (non modular) bricks of class designation 75 DSR Item No.19.7.1.1
(i) For Sewer Line
14
10088
141233.4
... More
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
DSR Item No.19.8.1.1
7
6971
48801.2
... More
Inside size 90x120cms and 90cms deep including CI cover with frame (medium duty) 500 mm internal diaMtr., total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg).With common burnt clay FPS (non modular) bricks of class designation 75 DSR Item No.19.7.2.1
(i) For Sewer Line
8
20859
166872.8
... More
Extra for depth for manholes: Size 120x90cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 DSR Item No.19.8.2.1
4
8362
33448
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. DSR Item No.19.16
38
437
16617.4
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 80mm nominal bore. DSR Item No.18.12.8
107.4
822
88368.72
... More
Same as above Item but 65mm nominal bore. DSR Item No.18.12.7
33
708
23370.6
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diaMtr., 160 mm bottom diaMtr. and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR Item No.18.34.1
2
14927
29855
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diaMtr., 160 mm bottom diaMtr. and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR Item No.18.33.1
2
8580
17161.4
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge. In all kind of soil upto 1.5m depth DSR Item No.2.6.1
51.1
140
7164.22
... More
Same as above Item but for In all kind of soil upto 1.5m to 3.0m. Depth DSR Item No.2.6.1+ 2.26.1
26.6
240
6391.98
... More
Same as above Item but for In all kind of soil upto 3.0m to 4.5m. Depth DSR Item No.2.6.1+(2x 2.26.1)
22.5
340
7661.25
... More
Same as above Item but for In all kind of soil upto 4.5 m to 6.0m. depth DSR Item No.2.6.1+(3x 2.26.1)
10.5
440
4627.35
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 Coarse sand DSR Item No.13.7.1
97.3
346
33753.37
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar DSR Item No.19.15.1
22
430
9464.4
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diaMtr. DSR Item No.19.19.2.2
3
926
2778.6
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 Mtr. & upto 150 Mtr. depth below ground level. Drilling of 300mm dia bore hole manually. DSR 23.2.1.1
15
652
9783
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia DSR 23.4.2
15
637
9567
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 23.5
12.1
1192
14430.46
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 23.6
13.1
1215
15917.81
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. DSR 23.7
13.1
1215
15917.81
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR23.8
1
1599
1599.2
... More
Constructing brick masonry INSPECTION chamber 60x60x75 cm with bricks of class designation 50 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete as per design. With FPS bricks (AR).
18
7525
135466.2
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) DSR 13.5.2
27.6
312
8619.48
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick DSR 11.6.1
191
522
99873.9
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (I) For vertical surface two coats @ 0.70 kg per sqm DSR Item No22.23.1
250.5
373
93561.75
... More
(ii) Same as above Item but For horizontal surface one coat @1.10 kg per sqm DSR Item No22.23.2
71.1
286
20370.15
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) DSR 5.1.2
86.7
7145
619523.52
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2
762.9
136
103983.27
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts Horticulture DSR-2020-No. 2.12
1278.1
52
66844.63
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Horticulture DSR-2020-No.2.1
191.7
67
12863.07
... More
Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm. Horticulture DSR-2020-No.2.4.3
95.8
274
26335.42
... More
Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge dump manure or/and good earth to be paid separately) Horticulture DSR-2020-No. 2.8
95.8
44
4301.42
... More
Carrigae of manure upto 5 K.M. Horticulture DSR-2020-No.1.1.2
191.7
280
53810.19
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. Horticulture DSR-2020-No.2.9
191.7
31
6000.21
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) Horticulture DSR-2020-No. 2.13
127.8
190
24384.24
... More
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). Horticulture DSR-2020-No. 2.10.
1278.1
14
18276.83
... More
Plantation of Permanenet trees: Anthocephalus Chinencis Trees. (MR).
15
1000
15000
... More
Bauhinia Parpuria Trees. (MR).
15
800
12000
... More
Cassia Fistula Trees. (MR).
15
350
5250
... More
Calastimonlanciolatus Trees. (MR).
15
500
7500
... More
Plantation of Shrubs in flower bed: Abutilon hybridum. (MR).
20
500
10000
... More
Acalyphahispida. (MR).
20
500
10000
... More
Almondanarifalia. (MR).
20
600
12000
... More
Barlariacristata. (MR).
20
500
10000
... More
C.I. Rectangular cover 455x610 mm with frame (low duty) DSR Item No.1354. (MR).
18
1216
21897
... More
Providing and fixing T-iron frames for doors,windows and ventilators of mild steel Tee-sections,joints mitered and welded with 15*3mm lugs 10 cm long embededded in cement concrete blocks 15*10*10 cm of 1:3:6 ( 1 cement : 3 course sand :6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer. (10.13.1)
146.6
111
16404.54
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound. DSR Item No.16.46.1
910.6
6
6192.08
... More
Trimixing of the surface of the cement concrete laid. (M.R.)
676
200
135200
... More
Cost of recoverd material from existing structure after deduction of demolition cost.
1
-2929000
-2929000
... More
PART - B (Electrical Works Sl. 169 to 404)
FIRE PUMPS - ELECTRICAL
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2280 lpm at 88 m Head (As per DSR 18.1.4)
1
318366
318366.23
... More
FIRE PUMPS - DIESEL ENGINE DRIVEN
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 88 m Head (As per DSR 18.2.4)
1
501732
501732.2
... More
JOCKEY PUMP:-
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head (As per DSR 18.3.1)
1
100319
100319.77
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (As per DSR 18.22)
4
1219
4879.16
... More
Pressure Vessel
Providing, fixing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.
working pressure:- 7 kg/sqcm
test pressure: 10 kg/sqcm (450 mm dia & 2000 mm height)
1
36500
36500
... More
Providing & fixing of Anti vibration Expansion Bellow at pump outlet etc. as required. 200 mm dia.
2
18500
37000
... More
150 mm dia.
2
12500
25000
... More
100 mm dia.
1
10500
10500
... More
80 mm dia.
1
8500
8500
... More
Providing and fixing in position the industrial type pressure
gauges with gun metal / brass valves complete as required (As per DSR E&M 16.8)
4
943
3774.56
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : (As per DSR 18.11)
200 mm dia. (As per DSR 18.11.7)
4
11998
47993.28
... More
150 mm dia. (As per DSR 18.11.6)
4
7069
28277.76
... More
100 mm dia. (As per DSR 18.11.5)
1
5260
5260.26
... More
80 mm dia. (As per DSR 18.11.4)
2
3930
7861.6
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (As per DSR 18.14) 150 mm dia. (As per DSR 18.14.7)
2
14033
28066.3
... More
80 mm dia. (As per DSR 18.11.4)
1
6068
6068.2
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia. (As per DSR 18.15.4)
1
17567
17567.09
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (EXTERNAL WORKS) 150 mm dia. (As per DSR 18.6.2)
154
3001
462209.44
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (PUMP ROOM WORKS) (As per DSR 18.7) 80 mm nominal bore (As per DSR 18.7.6)
22
1487
32719.94
... More
100 mm nominal bore (As per DSR 18.7.7)
11
2015
22174.9
... More
150 mm nominal bore (As per DSR 18.7.8)
22
2819
62037.58
... More
200 mm dia (wall thickness 6.3 mm) (As per DSR 18.7.9)
22
4310
94826.82
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (As per DSR 18.19) 2 way - 100 mm dia M.S. Pipe (As per DSR 18.19.1)
1
5319
5319.44
... More
4 way - 150 mm dia M.S. Pipe (As per DSR 18.19.2)
1
11025
11025.49
... More
INTERNAL FIRE FIGHTING WORKS (HYDRANT SYSTEM) Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required (for terrace booster pump)
(As per DSR 16.8)
1
943
943.64
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia. (As per DSR 18.11.5)
1
5260
5260.26
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia. (As per DSR 18.14.5)
1
8718
8718.45
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (As per DSR 18.7) 80 mm nominal bore (As per DSR 18.7.6)
13.2
1487
19631.96
... More
Same as above item but for 100 mm nominal bore (As per DSR 18.7.7)
77
2015
155224.3
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (As per DSR 18.9.1)
12
6032
72392.28
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40 m (As per DSR 18.17.2)
12
9525
114307.2
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun metal (As per DSR 18.16.1)
24
4104
98505.12
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal (As per DSR 18.18.1)
12
1906
22874.64
... More
Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.
12
1640
19680
... More
Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge.
(Approx. size of door: 900mm Wide & 1500mm Height)
12
9500
114000
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (As per DSR 18.13)
12
1042
12507.24
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (As per DSR 18.20)
1
14394
14394.52
... More
FIRE EXTINGUSHER
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
12
11980
143760
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
12
9100
109200
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
36
1000
36000
... More
ELECTRICAL WORKS FIRE FIGHTING PANEL
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification (As per DSR 18.5.2)
1
227117
227117.6
... More
Supply and Laying of Aluminium Conductor PVC insulated armoured served sheated cables 1100V grade on Cable Tray as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (As per SOR 20d.1) 95 sqmm 3.5 Core (As per SOR 20d.1.14)
80
751
60135.2
... More
6 sqmm 4 Core (As per SOR 20d.1.7)
80
182
14576
... More
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/ XLPE Al.conductor cables of 1.1 KV grade as required. (As per DSR 9.1) 95 sqmm 3.5 Core (45mm) (As per DSR 9.1.24)
8
463
3711.44
... More
10 sqmm 4 Core (25mm) (As per DSR 9.1.32)
4
212
848.96
... More
Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required. 4 x 2.5 sq.mm
70
265
18550
... More
2 x 2.5 sq.mm
65
145
9425
... More
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge.
10
821
8210
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width x 50mm depth x 1.6 mm thickness. (As per DSR 4.1.2)
160
476
76249.6
... More
FIRE DETECTION AND ALARM SYSTEM
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set. (As per DSR 17.1.11)
1
38438
38438.5
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. (As per DSR 17.1.2)
4
909
3638.88
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. (As per DSR 17.2.5)
4
217
871.04
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. (As per DSR 17.1.3)
13
373
4861.87
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as
required. (As per DSR 17.1.6)
13
439
5713.11
... More
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. (As per DSR 17.1.8)
13
714
9282.65
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. (As per DSR 17.5.2)
470
136
64155
... More
INTERNAL WIRING OF MAIN BUILDING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group - A (from DSR 1.10.1)
2317
800
1855546.28
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(from DSR 1.11)
33
1232
40669.86
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (from DSR 1.14) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (from DSR 1.14.1)
13228
183
2431835.52
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (from DSR 1.14.3)
13176
263
3472271.28
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire (from DSR 1.14.4)
3228
346
1118082.36
... More
2 x 16 sq.mm + 1 x 6 sq.mm. earth wire (from DSR 1.14.6)
228
609
138877.08
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire (from DSR 1.14.10)
8640
792
6851088
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire (from DSR 1.14.11)
68
1077
73236
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required. (from DSR 1.31)
880
376
331188
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (from DSR 1.32)
732
462
338440.2
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (from DSR 1.57)
176
573
100953.6
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required (from DSR 1.26)
386
31
12182.16
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (from DSR 1.33)
1080
68
74131.2
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. (from DSR 1.35)
1632
93
153228.48
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (from DSR civil 10.18)
352
174
61279.68
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (from DSR 1.50) Upto 450 mm sweep (from DSR 1.50.1)
264
355
93733.2
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. (from DSR 1.51.1)
264
163
43116.48
... More
FANS & LIGHT FIXTURES: Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect 2620 system lumens, 120 Lm/W, PF0.95, THD10%, CRI 80, sheet thickness 0.8mm, Tube with aluminium heat sink, 300V over voltage protection, 2.5 KV internal Surge Protection, with 5year warrantee.
CAT-AAA (from SOR 23.07)
640
995
637286.4
... More
Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in All respect. compelete in all respect. 1200 system lumens, 120 Lm/W, PF0.95, CRI 70, 300V over voltage protection, 4 KV internal Surge Protection,with 5 years warrantee CAT-AAA (from SOR 23.11)
24
1700
40800
... More
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.
176
985
173360
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC Cover and lenses built with mandatory driver set suitable for 40 to 50 Watt Confirming to IP 65/66 , IK 07 and above protection complete in all respect.4800-6000 system lumens, High power LED with lenses, 120 Lm/W, P.F.0.95, THD 10% at full load, CRI 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT-AAA (from SOR 23.22)
14
4630
64827.14
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required. (from DSR 1.34)
792
103
81861.12
... More
Supplying of 12 Watt 4 Star LED Wall Light Blub complete in all respect.
792
204
161568
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan (from DSR 19.01)
352
2153
758197.44
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. 300mm EXHAUST FAN
264
2757
727848
... More
DISTRIBUTION BOARD Supplying and fixing following way ,single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double Door (from DSR 2.3.3)
5
1826
9132.7
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double door (from DSR 2.4.3)
89
4707
419008.44
... More
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.) 4 way (4 + 12), Double door (from DSR 2.5.1)
1
5926
5926.97
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps TP MCB ( from NDSR)
2
1639
3278
... More
40 amps 4P MCB ( from NDSR)
90
2180
196200
... More
63 amps 4P MCB ( from NDSR)
1
2269
2269
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required. 25 amps (from DSR 2.14.1)
267
1600
427224.03
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (from DSR 2.10.1)
1010
201
203999.8
... More
Double pole (from DSR 2.10.3)
5
517
2587.9
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. (from DSR 2.11)
632
10
6484.32
... More
MV PANEL
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mm Phase to neutral-minimum 15mm
ELEVATOR PANEL
Incoming :One (1) No 125 Amp. 4P MCCB of 25KA Breaking capacity Metering :1 Set of CT's one of 125/ 5Amp ratio for Multifunction Meter
1 Set of Phase Indication Lamp.Bus Bar : One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length.
Outgoing : Phase indication lamps on each outgoing to be provided.
3 No.63 Amp 4P MCCB. (25 KA)
3 No.63 Amp DP MCB. (10 KA)
SPARE & SPACE
Panel described as above
2
124211
248422
... More
Metering Panel Incoming :One (1) No 320 Amp. 4P MCCB of 35KA Breaking capacity Metering :1 Set of CT's one of 320/ 5Amp ratio for Multifunction Meter1 Set of Phase Indication Lamp.Bus Bar :One (1) No. 400 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :Phase indication lamps on each outgoing to be provided.25 No. 40 Amp 4P MCB. (10 KA)22 No. 3 Phase Energy Meter2 No. SPACE & SPAREPanel described as above
4
370821
1483284
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each ( from DSR 2.21)
1
212
212.24
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. ( from DSR 5.4)
14
5895
82535.74
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( from DSR 5.9)
350
113
39767
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. ( from DSR 5.12)
160
226
36230.4
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. ( from DSR 5.15)
280
192
53905.6
... More
T.V. SYSTEM Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm dia PVC conduit ( from DSR 1.21.1)
3200
100
323168
... More
25mm dia PVC conduit ( from DSR 1.21.2)
4800
114
549168
... More
32mm dia PVC conduit ( from DSR 1.21.3)
2600
145
377468
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required 1 or 2 Module (75mmX75mm) ( from DSR 1.27.1)
352
235
82762.24
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required TV antenna socket outlet ( from DSR 1.24.7)
264
116
30827.28
... More
Bell Push ( from DSR 1.24.8)
88
110
9720.48
... More
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required. ( from DSR 1.38)
88
78
6873.68
... More
Providing, laying, connecting and testing of unarmoured TV cable RG-6 PVC insulated cable along wall or ceiling or through existing pipe. ( from DSR 1.19)
14256
37
528612.48
... More
L.T. CABLES
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3.5 x 300 sq.mm. ( from SOR 20a.1.19)
660
2322
1532539.8
... More
3.5 x 70 sq.mm ( from SOR 20a.1.13)
451
870
392523.34
... More
3.5 x 35 sq.mm ( from DSR 20a.1.11)
250
613
153390
... More
4 x 16 sq.mm ( from DSR 20a.1.9)
300
523
157119
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3½ X 35 sq. mm (32mm) ( from DSR 9.1.21)
2
291
582.28
... More
3½ X 70 sq. mm (38mm) ( from DSR 9.1.23)
6
369
2215.5
... More
3½ X 300 sq. mm (70mm) ( from DSR 9.1.30)
14
942
13200.04
... More
4 X 16 sq. mm (28mm) ( from DSR 9.1.33)
4
243
975.2
... More
Providing, laying and fixing following dia G.I. pipe (medium
class) in ground complete with G.I. fittings including trenching
(75 cm deep)and re-filling etc as required 100 mm dia ( from DSR 14.13.3)
20
1424
28498.6
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia ( from DSR 14.14.1)
20
522
10446.4
... More
150 mm dia ( from DSR 14.14.2)
20
571
11424.8
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal) ( from DSR 14.16.2)
30
228
6864.3
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.1)
40
527
21113.6
... More
150 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.2)
60
564
33895.2
... More
300 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.4)
80
759
60784.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.7.1)
5
914
4572.25
... More
150 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.7.2)
4
1002
4008.12
... More
300 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.7.4)
4
1461
5844.92
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.8.1)
4
1047
4188
... More
150 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.8.2)
4
1091
4364.76
... More
300 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.8.4)
4
1701
6804.32
... More
LIGHTING COUNDUCTOR
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. For lightining Conductor ( from DSR 5.4)
8
5895
47163.28
... More
Providing and fixing of lightning conductor finial , made of 25mm dia 300mm long Copper tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required. ( from DSR 6.2)
6
408
2452.2
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. ( from DSR 6.4)
12
89
1069.92
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor and external lighting complete as required. (For Horizontal run) ( from DSR 6.7)
450
99
44734.5
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run) ( from DSR 6.8)
250
155
38857.5
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. ( from DSR 6.12)
75
95
7160.25
... More
INTERNAL WIRING FOR VCB ROOM
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group - C (from DSR 1.10.3)
13
1157
15046.98
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (from DSR 1.14) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (from DSR 1.14.1)
130
183
23899.2
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (from DSR 1.14.2)
125
216
27122.5
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (from DSR 1.14.3)
132
263
34785.96
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (from DSR 1.32)
2
462
924.7
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required (from DSR 1.26)
2
31
63.12
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (from DSR 1.33)
9
68
617.76
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. (from DSR 1.35)
8
93
751.12
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep (from DSR 1.50.1)
3
355
1065.15
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. (from DSR 1.51.1)
3
163
489.96
... More
FANS & LIGHT FIXTURES:
Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. 2620 system lumens, 120 Lm/W, PF0.95, THD10%, CRI 80, sheet thickness 0.8mm, Tube with aluminium heat sink, 300V over voltage protection, 2.5 KV internal Surge Protection, with 5year warrantee.
CAT-AAA ( SOR 23.07)
6
995
5974.56
... More
Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in All respect. compelete in all respect. 1200 system lumens, 120 Lm/W, PF0.95, CRI 70, 300V over voltage protection, 4 KV internal Surge Protection,with 5 years warrantee CAT-AAA ( SOR 23.11)
2
1700
3400
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC Cover and lenses built with mandatory driver set suitable for 40 to 50 Watt Confirming to IP 65/66 , IK 07 and above protection complete in all respect. 4800-6000 system lumens, High power LED with lenses, 120 Lm/W, P.F.0.95, THD 10% at full load, CRI 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT-AAA ( from SOR 23.22)
2
4630
9261.02
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. 300mm EXHAUST FAN
3
2757
8271
... More
DISTRIBUTION BOARDSupplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door ( from DSR 2.4.2)
1
3924
3924.49
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps 4P MCB
1
2180
2180
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required. 25 amps ( from DSR 2.14.1)
3
1600
4800.27
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole ( from DSR 2.10.1)
5
201
1009.9
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. ( from DSR 2.11)
7
10
71.82
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each. ( from DSR 2.21)
1
212
212.24
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. ( from DSR 5.4)
2
5895
11790.82
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( from DSR 5.9)
90
113
10225.8
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. ( from DSR 5.12)
50
226
11322
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. ( from DSR 5.15)
60
192
11551.2
... More
L.T. CABLES
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 x 10 sq.mm ( from SOR 20.1.8)
100
489
48983
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 X 10 sq. mm (25mm) ( from DSR 9.1.32)
4
212
848.96
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia ( from DSR 14.14.1)
10
522
5223.2
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal) ( from DSR 14.16.2)
10
228
2288.1
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required:
100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.1)
20
527
10556.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.7.1)
5
914
4572.25
... More
INTERNAL WIRING FOR ESS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group - C ( from DSR 1.10.3)
31
1157
35881.26
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ( from DSR 1.14.1)
217
183
39893.28
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire ( from DSR 1.14.2)
194
216
42094.12
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( from DSR 1.14.3)
198
263
52178.94
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. ( from DSR 1.32)
4
462
1849.4
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required ( from DSR 1.26)
5
31
157.8
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. ( from DSR 1.33)
25
68
1716
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. ( from DSR 1.35)
25
93
2347.25
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Upto 450 mm sweep ( from DSR 1.50.1)
4
355
1420.2
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. ( from DSR 1.51)
4
163
653.28
... More
FANS & LIGHT FIXTURES:
Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. 2620 system lumens, 120 Lm/W, PF0.95, THD10%, CRI 80, sheet thickness 0.8mm, Tube with aluminium heat sink, 300V over voltage protection, 2.5 KV internal Surge Protection, with 5year warrantee.
CAT-AAA ( from SOR 23.07)
21
995
20910.96
... More
Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in All respect. compelete in all respect. 1200 system lumens, 120 Lm/W, PF0.95, CRI 70, 300V over voltage protection, 4 KV internal Surge Protection,with 5 years warrantee CAT-AAA ( from DSR 23.11)
4
1700
6800
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC Cover and lenses built with mandatory driver set suitable for 40 to 50 Watt Confirming to IP 65/66 , IK 07 and above protection complete in all respect. 4800-6000 system lumens, High power LED with lenses, 120 Lm/W, P.F.0.95, THD 10% at full load, CRI 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT-AAA ( from DSR 23.22)
3
4630
13891.53
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.300mm EXHAUST FAN
4
2757
11028
... More
DISTRIBUTION BOARD
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door ( from DSR 9.1.32)
1
3924
3924.49
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps 4P MCB
1
2180
2180
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required. 25 amps ( from DSR 2.14.1)
3
1600
4800.27
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole ( from DSR 2.10.1)
5
201
1009.9
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. ( from DSR 2.11)
7
10
71.82
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each ( from DSR 2.21)
1
212
212.24
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. ( from DSR 5.4)
2
5895
11790.82
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( from DSR 5.9)
90
113
10225.8
... More
Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth
electrode including connection with G.I. thimble excavation and
re-filling as required. ( from DSR 5.12 )
50
226
11322
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. ( from DSR 5.15)
60
192
11551.2
... More
L.T. CABLES
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 x 10 sq.mm ( from SOR 20a.1.8)
120
489
58779.6
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 X 10 sq. mm (25mm) ( from DSR 9.1.32)
4
212
848.96
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia ( from DSR 14.14.1)
10
522
5223.2
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal) ( from DSR 14.16.2)
30
228
6864.3
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.1)
20
527
10556.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.7.1)
5
914
4572.25
... More
INTERNAL WIRING FOR PUMP ROOM
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group - C (from DSR 1.10.3)
8
1157
9259.68
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (from DSR 1.14) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (from DSR 1.14.1)
48
183
8824.32
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (from DSR 1.14.3)
68
263
17920.04
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (from DSR 1.32)
2
462
924.7
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required (from DSR 1.26)
1
31
31.56
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (from DSR 1.33)
6
68
411.84
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. (from DSR 1.35)
5
93
469.45
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 350 mm sweep (from DSR 1.50.1)
2
355
710.1
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. (from DSR 1.51.1)
2
163
326.64
... More
FANS & LIGHT FIXTURES:
Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. 2620 system lumens, 120 Lm/W, PF0.95, THD10%, CRI 80, sheet thickness 0.8mm, Tube with aluminium heat sink, 300V over voltage protection, 2.5 KV internal Surge Protection, with 5year warrantee.
CAT-AAA ( SOR 23.07)
4
995
3983.04
... More
Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity / transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in All respect. compelete in all respect. 1200 system lumens, 120 Lm/W, PF0.95, CRI 70, 300V over voltage protection, 4 KV internal Surge Protection,with 5 years warrantee CAT-AAA ( SOR 23.11)
1
1700
1700
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC Cover and lenses built with mandatory driver set suitable for 40 to 50 Watt Confirming to IP 65/66 , IK 07 and above protection complete in all respect. 4800-6000 system lumens, High power LED with lenses, 120 Lm/W, P.F.0.95, THD 10% at full load, CRI 70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT-AAA ( from SOR 23.22)
1
4630
4630.51
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.300mm EXHAUST FAN
2
2757
5514
... More
DISTRIBUTION BOARD
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 Way(4+12) Double door ( from DSR 2.4.1)
1
4091
4091
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 4P MCB
1
2180
2180
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required.25 amps ( from DSR 2.14.1)
3
1600
4800.27
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole ( from DSR 2.10.1)
5
201
1009.9
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. ( from DSR 2.11)
1
10
10.26
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each. ( from DSR 2.21)
1
212
212.24
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. ( from DSR 5.4)
2
5895
11790.82
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( from DSR 5.9)
40
113
4544.8
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. ( from DSR 5.12)
30
226
6793.2
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. ( from DSR 5.15)
20
192
3850.4
... More
L.T. CABLES
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 x 10 sq.mm ( from SOR 20.1.8)
100
489
48983
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 X 10 sq. mm (25mm) ( from DSR 9.1.32)
4
212
848.96
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.100mm dia ( from DSR 14.14.1)
10
522
5223.2
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)(from DSR 14.16.2)
10
228
2288.1
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. ( from DSR 4.6.1)
5
527
2639.2
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. (from DSR 4.7.1)
2
914
1828.9
... More
EXTERNAL ELECTRICAL WORK / DG SET / LIFT
Supplying, Installation and commissioning of AMF start silent type 100 KVA DG set comprising of suitable BHP diesel engine directly coupled to 3 phase 50 Hz 415 V alternator of 82.50 KVA rating at 0.8 power factor mounted on a common base frame, complete in all respects with all required safety devices, fittings, batteries, accessories, filters, residential type silencer, control panel, inbuilt diesel oil MS tank of 990 ltrs. capacity made of 2mm thick M.S. sheet complete with M.S. fuel piping, G.M. gate valves, supports, control cable between generating set and control panel, exhaust piping with asbestos roping, antivibration mounting pads, first filling of lubricant oil totally enclosed in air tight, dust proof, weather proof, powder coated cubical type, sound proof as per CPCB norms acoustic enclosure made of 2mm thick CRCA sheet with with heavy duty doors, lockable arrangement, sound proof insulation with high density rock/mineral polymer/fibre cloth and perforated CRCA sheets, suitable to reduce the sound level upto 75dba approx. at a distance of 1 mtrs. as per Current CPCB norms. MAKE- Cummins / Kirloskar or Equivalent AMF Panel Incoming-250 Amps FP MCCB of 25KA breaking capacity and contactor same rating
1
998775
998775
... More
Supply and installation of lifts with power operated center opening doors and AC variable voltage and variable frequency control with SS body with 12 stops and minimum speed not less than 1.5 m/s, Cross Flow Fan Ventillation with following capacity make Otis / Kone / Mitshubishi 16 passengers (1088 kg)
2
2596700
5193400
... More
20 passengers (1360 Kg)
2
2676100
5352200
... More
M.V. PANELS
Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panel with TPN ACB (65KA, 4 Pole Elect draw out Micor Processer Release IPR2) and TPN MCCB's (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Engineer-in-charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only. Make :- All Switch Gear to be Schneider or equivalent .
Main LT Panel
Incoming : 2 Nos. 630 Amp. 4P MCCB of 50KA Breaking capacity with inbuilt O/L and S/C fault protection with microprocessor based release.1 Nos. 630 Amp. 4P MCCB switch disconnector Bus Coupler of 50KA Breaking capacity with suitable 3 Lock 2 key interlock between incomers and bus coupler Metering :3 Set of CT's one of 630/ 5Amp ratio for Multifunction Meter2 Set of CT's one of 250/ 5Amp ratio for APFC relay.1 Set of Phase Indication Lamp.Bus Bar :One (2) No. 800 Amp.TPN aluminimum bus bar of suitable length
Outgoing :Phase indication lamps on each outgoing to be provided.6 No. 320 Amp 4P MCCB. with thermal Magnetic release2 No. 250 Amp 4P MCCB. with thermal Magnetic releaseSPACE FOR SPARE- 2 No
1
674541
674541
... More
EM. PANEL
INCOMING1 No 320 Amp. 4P MCCB of 35KA Breaking capacity1 No 320 Amp. 4P ATSMetering :1 Set of CT's one of 320/ 5Amp ratio for Multifunction MeterOne (1) Set of Phase Indication Lamp.Bus Bar :One (1) No. 300 Amp.TPN aluminimum bus bar of suitable length
Outgoing :Phase indication lamps on each outgoing to be provided.1 No. 250 Amp 4P MCCB. with thermal Magnetic release3 No. 125 Amp 4P MCCB. with thermal Magnetic release1 No.100 Amp 4P MCCB. with thermal Magnetic release2 No. 40 Amp 4P MCCB. with thermal Magnetic release
SPACE FOR SPARE- 2 No
1
352968
352968
... More
CAPACITOR PANEL-120 KVAR
SITC APFC Panel of 120 KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static 5,10,15,25 KVAR capacitors (without oil) in tier formation complete with following TPN MCCB as incomer of the panel, 9 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for each capacitors protected with MCBs, Ammeter (Analogue type) with CTs, Voltmeter (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated. Incoming One (1) No 250 Amp. 4P MCCB of 25 KA Breaking capacity BUS BAR1 Set of 300 Amps TPN Aluminium Bus Bars OUT GOING03 No. 63 Amps. TP MCCB (25 KA)-25 KVAR01 No. 40 Amps. TP MCCB (25 KA)- 15 KVAR02 No. 32 Amps. TP MCCB (25 KA) - 10 KVAR02 No. 25 Amps. TP MCCB (25 KA) - 5 KVAR
2
246018
492036
... More
SFP (OUTDOOR TYPE) IP 65
Incoming :One (1) No 40 Amp. 4P MCCB of 25KA Breaking capacity Metering : One (1) No. Sets Multifunction Meter each incoming One (1) No. of Phase Indication Lamp each incoming Bus Bar :One (1) No. 60 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :Phase indication lamps on each outgoing to be provided.10 No. 16 Amp DP MCB. (10 KA)
SPACE FOR SPARE- 2 No
1
76700
76700
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each ( from DSR 2.21)
2
212
424.48
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required ( from DSR 5.2)
6
5408
32451.6
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. ( from DSR 5.4)
8
5895
47163.28
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required ( from DSR 5.6)
4
10918
43672.72
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) ( from DSR 5.8)
72
766
55217.52
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) ( from DSR 5.9)
432
113
49083.84
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. ( from DSR 5.12)
245
226
55477.8
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. ( from DSR 5.14)
40
916
36672.8
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. ( from DSR 5.15)
280
192
53905.6
... More
L.T. CABLES Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3.5 x 300 sq.mm. ( from SOR 20a.1.19)
160
2322
371524.8
... More
3.5 x 240 sq.mm. ( from SOR 20a.1.18)
150
1969
295423.5
... More
3.5 x 70 sq.mm ( from SOR 20a.1.13)
300
870
261102
... More
4 x 16 sq.mm ( from SOR 20a.1.19)
200
523
104746
... More
3 x 6 sq.mm, ( from SOR 20a.1.5)
600
435
261354
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 2 X 6 sq. mm (19mm) ( from DSR 9.1.1)
40
189
7574.4
... More
3½ X 70 sq. mm (38mm) ( from DSR 9.1.23)
4
369
1477
... More
3½ X 240 sq. mm (62mm) ( from DSR 9.1.29)
2
810
1620.6
... More
3½ X 300 sq. mm (70mm) ( from DSR 9.1.30)
12
942
11314.32
... More
4 X 16 sq. mm (28mm) ( from DSR 9.1.33)
4
243
975.2
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia ( from DSR 14.13.3)
20
1424
28498.6
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia ( from DSR 14.14.1)
30
522
15669.6
... More
150 mm dia ( from DSR 14.14.2)
30
571
17137.2
... More
250 mm dia ( from DSR 14.14.3)
10
769
7692.8
... More
300 mm dia ( from DSR 14.14.4)
10
899
8994.6
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal) ( from DSR 14.16.2)
30
228
6864.3
... More
Miscellaneous
Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. ( from DSR 2.22)
1
230
230.39
... More
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
4
1500
6000
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
2
3000
6000
... More
Supply and fixing of fire extinguishers, ABC Type 6.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
2
9100
18200
... More
Supply and fixing of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
2
11980
23960
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 ( from CIVIL DSR 18.34.1)
8
14909
119276
... More
EXTERNAL LIGHTING
Supply and fixing of 7 mtr. G.I. Octagonal pole of approved make ( top dia 70 mm, Bottom dia 130 mm & Base plate 12 mm thick) having 3 mm thickness with single arm bracket length of 1 mtr. Length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect.( from SOR 21.2)
18
18353
330361.02
... More
Supply and fixing of factory wired integral LED flood light luminiaries with die cast Al. housing with toughend glass UV stablized PC cover and lenses built with mandatory driver set suitable for 40 to 50 watt Confirming to IP 65/66, IK 07 and above protection complete in all respect.4000-6000 system lumen, High power LED with lenses, 120lm/w, PF 0.95, THD10% at full load, CRI 70, Potted driver set in metal housing ( Not Circular) Phase to Phase protection at 440v & 300v auto cut and re-start feature, 4KV internal Surge Protection with 5 years warrantee CAT- AAA
18
4630
83349.18
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole ( from DSR 2.10.3)
18
517
9316.44
... More
Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.1 output per phase and suitable for single phase supply ( from DSR 15.4.1)
4
3462
13851.68
... More
Supplying and embedding following dia G.I. pipe (medium class)
in pole collar/ foundation (during casting) for cable entry
including bending the pipe to the required shape complete as
required 32 mm dia ( from DSR 11.6.1)
15
414
6213.45
... More
CONSTRUCTION OF TUBEWELL
Transportation Charges of drilling equipment including assembly and other material as required.
1
20000
20000
... More
Drilling of 675 mm. dia by rotary machine
120
1500
180000
... More
Supply & laying of 350 mm. dia M.S. ERW (Electric Resistance Welded) housing pipe (8 mm. thick)
50
3000
150000
... More
Supply & laying of 200 mm. dia M.S. ERW (Electric Resistance Welded) blind pipe (6 mm. thick)
30
2500
75000
... More
Supply & laying of 200 mm. dia M.S. ERW (Electric Resistance Welded) slotted pipe (6 mm. thick)
40
2500
100000
... More
Supply & fixing of 350 mm. dia Socket
8
1600
12800
... More
Supply & fixing of 200 mm. dia Socket
11
800
8800
... More
Supply & fixing of 200 mm. dia Bail plug
1
1300
1300
... More
Supply & fixing of 350 mm. dia well cap
1
2200
2200
... More
Supply & fixing of 350x200 mm. dia reducer.
1
5500
5500
... More
Supply & fixing of 350 mm. dia housing clamp
1
6000
6000
... More
Supply & Filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of E/I.
35
3600
126000
... More
Development by air compressor including Transportation.
30
2400
72000
... More
Development by O.P. Unit including Transportation.
40
1500
60000
... More
Supply of submersible pump suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with electric moter operating of 415 volt suitable for 3 phase 50 cycle A.C. Supply of following duty condition: Make : Kirloskar/KSB/CG A - Discharge of water in LPM 860 Approx size of discharge outlet in 100 mm. B - Total Head of pump set 45 m.
1
63000
63000
... More
Supply and fixing of finolex or equivalent ISI marked submersible copper cable of size 2x3x2.5 sq. mm.
60
180
10800
... More
Supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having L&T of qul. Male switch fuse unit with HRC fuses, Ameter, Boltmeter, Selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of Jyoti or eq. Air break Star- Delta motro starter suitable for above submersible pump set.
1
20000
20000
... More
Supply of 100mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.
60
3000
180000
... More
Supply of 100mm dia M.S. column pipe clamps with nut, bolts, packing etc.
2
1400
2800
... More
Supply of 100mm dia C.I. double flanged ISI mark reflex valve of updadhya or equ. Make.
1
6500
6500
... More
Supply of 100mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.
2
10000
20000
... More
Supply of C.I. double flanged bend of 100mm dia i/c cost of material and labour.
1
1500
1500
... More
Supply of 100mm dia C.I. tee heavy quality i/c cost of material.
1
20000
20000
... More
Supply of Guru/Fibing or equivalent make pressure gauge.
1
12000
12000
... More
Erection & commissioning of pumping plants complete along with electric wiring.
1
15000
15000
... More
Supply of steel wire rope of 1/2" size
60
50
3000
... More
S/B of 600mm x 600 mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing.
1
5380
5380
... More
S/F of one number 8 to 6 SWG G.I. wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site.
8
200
1600
... More
S/F of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sqmm x 4 core
40
343
13720
... More
Domestic Water Supply pumps Supply, installation, testing & commissioning of Centrifugal Horizontol pump with CI casing with Cast iron body, SS impeller, casing, shaft and C.I. base frame suitable for 415+/- 10% volts, 3 phase A.C. supply with 50 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information before supply. with automation panel. Make : Kirloskar/KSB/CG Capacity/Flow Rate - 12.5 m3/hr, Head - 70 m HP - 7.5 HP Approxi., Location - 1 set in UGT (1 set = 2nos(1W+1S))
1
1500000
1500000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements