Public Works Department Tender

Retro Reflectorised Signs (Stainless steel Frame and Post with one side sings) Supply & Fixing of reflective sign board (single side) of size 1.50x1.20 m retro reflective sheeting of HIP grade type -IV. The board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4mm thick, ACM sheet of standard make as per MORTH specification The Board shall be fixed using 2 man post 45x45x60cm cement concrete foundation. The stainless steel joint welding of SS pipe work shall be band and grinder property including bufting so an to give uniform shining at weded joints. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibililty.--------------- Altematively a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accapted provislonally In such a situation, the Employer / Cilent it so desires, could seek for a performnce guarantee which would be reteased after receipt or certifcate meeting the requ irement of three years outdoor weathering of the sheeting as per IRC 67-2012 Legends, letters numerals and borders etc should be as per MoRTH specification No- 801.3.7 Proof of the same in form of government report shall be uploaded white quoting tender.

Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Providing & fixing of reflective signs with a corrosion resistant 4mm thick aluminium composite panel face to be fully covered with High intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3. For Cantilever

Ordinary kilometer stone (precast)

Hectometer stone (precast)