Public Works Department Tender

PCC Grade M15 Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical specifications. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

PCC Grade M20 Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

RCC Grade M20 Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. Including cost of all material labour T&P etc. required for proper completion of work as per direction of Engineer-in-Charge. SI No. 504. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Supply and fixing of 10cm. (4") internal dia for 10.0 cm. PVC down pipe Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of neary M.S. clamp 2.5cm x 3 mm. (1" x1/8") fixed to walls with cement motar (1:2) and including supply of 15 cm (6") long 6mm. (1/4") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. required for proper completion of work as per direction of Engineer-in-Charge. SI No. 730a. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Dewatering. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. New Item no 3. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Construction of granular sub-base grade I by providing well graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Brick edging on both sides of road with M-150 class bricks on edge 3" wide and 4-1/2" deep laid with mud mortar, finished to the required temples in proper alignment & also dressing ramming the exca ed earth and diredted by Engineer-in-charge. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing and applying tack coat with VG-10 bitumen using Bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Carted Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. As per SI No. 251a including Lead upto 1.00 Km. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8") depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. As in item No. 762(a) above but with bricks laid on edge. SI No. 762(B). All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Supply of 1000mm dia NP-3 Class hume pipe. SI No. New Item Chp-1. All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.

Laying of 1000 mm dia NP-3 hume pipe in position ( Labor only) including labour and T & P etc. required for completion of the work. ( SI No. 10.27). All Material, Labour, T&P etc also including VAT, labour cess, royalty and all other applicable Taxes but excluding GST.