Public Works Department Tender

Reflective Raised Pavement Markers (road Studs/Cat Eye) Supply and fixing of reflective raised pavment marker with its body durface made of tough ASA (Acylic styrene Acrylonitrite) or HIPS (Hi- impect Polystyrene) or acrylonitrile butadies styrenc (ABS) The marker shall supported a lod of 13635 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of numbers of lenses containing single or dual prismatic cubes of providing total internal reflection of the lights entring the lens face. retro refletive surface shall perferably be 35t 5 degree to base and area of each retor reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marker with name trade mark or other means of identification of the manufacturer. mimensions of road studs should not be less than 100 mm x 100 mm x10mm. RPM (Without shank)as per ASTM

Supply & fixing of Retro refelective high intensity informary sign board/cautionary sign board etc. As per MoRTH- Specificaion One each side (1.20x0.90)

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings.

Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Providing & fixing of reflective signs with a corrosion resistant 4mm thick aluminium composite panel face to be fully covered with High intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3.

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Ordinary kilometer stone (precast)

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Ordinary hectometer stone (precast)