Public Works Department Tender

Seal Coat- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type "C" as per Technical Specification Clause 510

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,

Construction of 30x30 cm U Type RCC drain in Abadi Portion

Earth work in cutting or in embankment in ordinary soil, excavation to be made in the form of regular pits not exceeding ½ m in depth and earthwork in embankment to be 20cm layers including ramming, dressings the surface to the required level and slopes and also including lead upto 30M and lift upto 1.50M. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 distance as directed by Engineer in-charge. S.I.No. 253