Public Works Department Tender

60cm circular with diffi (Speed Limit) (GST will be paid extra as per applicable) Including Labour Cess.

450mm x 600mm rectangular with diffinitation plate (20cm x 60cm) (GST will be paid extra as per applicable) Including Labour Cess.

50x60cm single chevron (GST will be paid extra as per applicable) Including Labour Cess.

30x90cm (Left/Right) Object Hazard (GST will be paid extra as per applicable) Including Labour Cess.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting The retro reflective sheeting shall be tested for coefficient of retro reflection,daytime colour and luminance, shrinkage, flexibility, linerremoval, adhesion, impact resistance, specular gloss and fungus resistance,3 year outdoor weathering and its having passed these tests shall be obtained from International/Goverment Laboratory/Institute by the manuffacturer of the sheeting and in case the certificate obtained from International condition it shoud also be obtained from in Indian conditions within 3 years of launching of product by the manufacture in aboard.Altematively a certificate confirming to ASTM Specification(D 4956-09)on artificial accelerated weathering requirments from a reputed laboratory in India can be accepted provisionally ,In such a situation the Employer/Client,if so desires,could seek for a performance gaurantee which would be released after receipt of certificate meeting the requirments of three years outdoor weathering of the sheeting as per as per IRC 67 : 2012 Legends, Leeters,numerals and borders etc should be as per MorTH Specification No-801.3.7 . Sheet Fixed overaluminium sheeting 2 mm tkick with area not exceeding 0.90 sqm Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concreete 45x45x60 cm below from ground level as per approved drawing ,complete. (GST will be paid extra as per applicable) Including Labour Cess. Direction and Place Identification Signs upto 0.9 sqm Size Board

Providing and fixing of Retro -Reflective Tree Plate of size 6"x6" made of 4 thick aluminium sheet. Face to be fully covered using high intensity Prismatic Grade (Type-IV) Reflective Sheeting of Avery Dennision, 3m of ther approved Brands as per MORT & H.Specification. Reflective sheeting shall by fully processed on base aluminum sheet. (GST will be paid extra as per applicable) Including Labour Cess. Retro -Reflective Tree Plate of size 6"x6"

Providing and Laying of hot applied thermoplastic compound 2.5mm thick including refectorising glass beads @ 250 gms per Sqm. Area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 The finished surface to be level uniform and free from streaks and holes. (GST will be paid extra as per applicable) Including Labour Cess. Edge line / Centre line marking.

Providing and Laying of hot applied thermoplastic compound 5.0mm thick including refectorising glass beads @ 250 gms per Sqm. Area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 The finished surface to be level uniform and free from streaks and holes. (GST will be paid extra as per applicable) Including Labour Cess. Repeated Bar

Supply & fixing of M S Delinator made of mild steel with pure polyster powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion .the surface should be concreeted so that there should not be any exposed surface without powder coating.Alternatively these metal guide poles can be concreeted whith thermoplastic body.The posts shall have lan elisposoidal or cicular design wth the height of the pols shall be 800mm to 900 mm above the ground with about 200 to 300 mm base which can be anchored into ground .Mild steel Guide poles shall confirm to type XI sheeting specification as per IRC:67 and ASTM D-4956 which would ensure to obtain clear visibilty of the road alignment during night time.The retro reflective sheeting shall be tested for coefficient of retro reflection,daytime colour and luminance,shrinkage,flexibility,liner removal, adhesion, impact resistance,specular gloss and fungus resistance,3 year outdoor weathering and its having passed these tests shall be obtained from International/Goverment Laboratory/Institute by the manuffacturer of the sheeting and in case the certificate obtained from International condition it shoud also be obtained from in Indian conditions within 3 years of launching of product by the manufacture in aboard.Altematively a certificate confirming to ASTM Specification(D 4956-09)on artificial accelerated weathering requirments from a reputed laboratory in India can be accepted provisionally ,In such a situation the Employer/Client,if so desires,could seek for a performance gaurantee which would be released after receipt of certificate meeting the requirments of three years outdoor weathering of the sheeting as per as per IRC 67 : 2012 & Proof of the same report shall be uploaded which quoting tender.The rate shall include all materials (GST will be paid extra as per applicable) Including Labour Cess. Road Delenator

Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged get worn out or lose their reflectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge complete in all respect as per directions of Engineer-in-charge (RPM with shank) (GST will be paid extra as per applicable) Including Labour Cess. Reflective Raised Pavement Markers (Cat Eye)