Public Works Department Tender

Seal coat type "C" Providing and applying seal coat type "C" comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kN Static roller and finishing to required level and grades including cost of bitumen as per MoRD Technical Specification Clause 510 (MoRD Sl. no. 5.12 and Specification no. 510), (including Labour cess, royalty and cost of Bitumen VG-10) (GST will be paid extra as applicable).

E/W in Patries Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(MoRD Sl. no. 3.14 and Specification no. 303.1), (Excluding Royalty) (including Labour cess) (GST will be paid extra as applicable).

Cement Concrete Pavement Construction of unreinforced, dowel jointed at expansion and construction joint only, OPC cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade OPC cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision to contraction and expansion, construction joints, applying debonding strips, primer, sealent,dowel bars,near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 and as per direction of E/I, (MoRD Sl. no. 6.4 and Specification no. 1500), (including Labour cess and royalty) (GST will be paid extra as applicable).

K.C.Drain Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling, watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royalty). as per S.I. No. 251, (including Labour cess), (GST will be paid extra as applicable).

Cement concrete with 4cm. (1.5") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials, labour and T&P| etc. required for proper completion of the work.. as per S.I. no 280.), (including Labour cess and Royalty), (GST will be paid extra as applicable).

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24| 8.W.G.G.I. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.. as per S.I. no 283A. (including Labour cess and royalty), (GST will be paid extra as applicable).

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 as per MoRD technical specification clause 1000. (MoRD Sl. no. 12.6 and Specification no. 1000), (including Labour cess) (GST will be paid extra as applicable).