Public Works Department Tender

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm. to 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line. Grade and level to serve as wearing coarse on a perviously prepared base, including mixing in suitable plant , laying and rolling with a three wheeled 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clasue 508. (Including all material T&P, labour cess etc. but excluding G.S.T.)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat as per Technical Spefification Clause -510. (Including all material T&P, labour cess etc. but excluding G.S.T.)

Construction of un-reinforced, dowel jointed at expansion and construction joint only , plain cement concrete pavement , constructoin as per design, over a prepared sub base,with 43 grade cement or any other type as per clause 1501.2.2 M30 (Grade) coarse fine aggregates conforming to IS:383 maximum size of coarse aggregate not exceeding 25 mm mixed in a concrete mixture of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side forwork (steel channel, laying and fixing of 125 micron thick polythene film. wedges. steel plates including leveling the formwork as per drawing) spreading the concrete with shovels , rakes , compacted using needle screed and plate vibrators and finished in continious operation in including provision of construction and expansion , construction joints, admixitures as approved , curing of concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification clause 1501( without Steel Bar.) (Including all material T&P, labour cess etc. but excluding G.S.T.)