Public Works Department Tender

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawing and technical specifications. As per MoRT&H Specification & Clause No. 1600, 12.42 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:3 (1 cement : 3 coarse sand). As per MoRT&H Specification & Clause No. 1300, 12.05 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and ealing the joints with approved weather sealant as per rchitectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone - 30mm thick gang saw cut stone. As per CPWD Specification & S.I.No. 8.20 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with achine cut edges sand stone) on walls at all eights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. pproved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin-charge and painted with two or more coats of epoxy paint (Shop drawings shall be mitted by the contractor to the ngineer-in-charge for approval before execution). The rame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). As per CPWD Specification & S.I.No. 8.21 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR Specification & S.I.No. 13.26 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate, Boundry wall, Barrier Gate & Santari Check Post)

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) As per DSR Specification & S.I.No. 13.46.1 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Providing and laying rectified glazed ceremic floor tiles 300x300mm or more size (thickness to specified by approved make & colors) of first quality confirming to IS 15622 of approved make in colors & shade laid on 20mm thick cement mortor 1:4 (Icement 4 coarse sand) including grouting the joints with cement and matching pigments. As per DSR Specification & S.I.No. 11.40 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Main Gate)

Dismantling of brick work or stone work in lime or cement mortor including disposal of refuse as directed by engineer-in-charge within a distance of 60, As per PWD Specification & S.I.No. 692. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall)

Cement concrete with 4cm gauge stone ballast, approved course sand and cement in proportion 6:3:1 in foundations and under floors including supply of all materials labour and tools and plants etc. required for proper completion of the work. As per PWD Specification & S.I.No. 280. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall, Barrier Gate & Santari Check Post)

M-150 brick work in 1:4 cement and C/sand mortar in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. As per PWD Specification & S.I.No. 305. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall & Santari Check Post)

R.C.C. Work with cement approved coarse sand and 20 mm gauge (nomianl size) dalla stone aggregate in the proporation of 1:1.5:3 M-20 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B W.G.G.I. binding wire and as required supply of all materials, labour centering and shuttering and removal of the same after completion of work. As per PWD Specification & S.I.No. 289. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

R.C.C. work with cement, approved coarse sand and 20 mm gauge stone aggrigate with M-20 nominal mix 1:1.5:3 in RCC Tie beam & excluding the supply of reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. As per CPWD Specification & S.I.No. 285 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall)

R.C.C. work with cement, approved coarse sand and 20 mm gauge stone aggrigate with M-20 nominal mix 1:1.5:3 in RCC T- beam & slab roofs and RCC Columns excluding the supply of reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. As per CPWD Specification & S.I.No. 288 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Santari Check Post)

Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per PWD Specification & S.I.No. 504. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall, Barrier Gate & Santari Check Post)

Providing and fixing 1 mm. thick M.S. sheet garrage door with frame of 40x40 x 6 mm (1% x 1% x %") angle iron, 3.15 mm 1/8" thick M.S. gusset plates at the junctions and corners, including supply and fixing of necessary fittings. lock rail of 37.5cm length of oxidised iron and including pintels, hooks at the top and applying a priming coat of red paint on all sides completed. As per PWD Specification & S.I.No. 517a. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

Mild steel or iron work in havey size such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured (90x90x10mm), As per PWD Specification & S.I.No. 503. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel /wood scrappers sand papering and knotting including cost of all materials, labour and T&P etc required for proper completion of the work. As per PWD Specification & S.I.No. New Item 1b. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials, labour, T&P etc required for the proper complition of the work. As per PWD Specification & S.I.No. New Item 2. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials, labour, T&P etc required for the proper complition of the work. As per PWD Specification & S.I.No. New Item 4iii. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Barrier Gate)

12mm thick plaster with cement and approved sand of 1.25FM mortar 1:3 on brick work (minimum thickness not less then10mm) including raking the joints washing and cleaning and supply of all material labour and tools and plants etc. required for the proper completion of the work As per PWD Specification & S.I.No. 582. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Boundry wall & Santari Check Post)