Public Works Department Tender

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.471 New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR13.471

Providing and fixing 9.6.1 12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood partas per IS : 848 :As per DSR 9.6.1 12

21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / .etc all complete DSr 21.3.2

Providing and fixinf PVC blind chik at window with all materials and labours .etc all complete as per mEIC .Gem portal

DSR 21.1.2.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be included ) As Per D.S.R. No 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing mineral fibre false ceiling tiles at all heights .........etc all completer as per EIC. DSR 26.27

9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)

DSR 3.5 supply and fixing of superior quality module switch boards sheet .etc all comlpete

3.6.1 supply and fixing of moduler switches with all accessories ......etc all complete as per EIC

Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of suitable size and allied works complete 6.11 18 Module

12m

6m

8m

4m

2m

3.6.1 supply and fixing of moduler switches with all accessories ......etc all complete as per EIC

Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of suitable size and allied works complete 6.11

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube.DSR6.13.1

Providing and fixing concealed light of Philips brand ..etc all complete Gem

9.171 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

21.18 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including pr. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Providing and fixing mat finish mica

9.81 Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125mm

9.81.2 100mm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multis system of wiring with specified IS-694:confirming to latest amendments SOR electrical 2.3 1.00mm

1.5mm

2.5mm

4.00mm

labour charges for ward drove and cabinet work(for mica work )

Providding and fixing looking Mirror .etc all complete as per Gem portal