Public Works Department Tender

Wiring for Call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5sq.mm FRLS PVC copper conductor single core cable etc. as required.

Wiring for Exhaust point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5sq.mm FRLS PVC copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings) (For Plug Point and Aquaguard)(4Nos. for Computer Pt.)

Supply and Fixing of suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 2 nos. 3 pin 5/6A modular socket outlet and 2 nos. 5/6A modular switch, connections etc. as required. (For light Plugs to be used in non residential buildings). (TV Point)

Supply and Fixing of brass Angle holder including connection etc. as required.

invertor wiring point for light/fan /plug.

Supply and Fixing of suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 25 A modular socket outlet with 25 A modular SP MCB C curve including connections painting etc. as required.

Supply and Fixing of suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.

Supply and Fixing of 6 way (4+18), Double Door, Horizontal type three pole and neutral, sheet steel, MCB Distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator).

Supply and Fixing 4 way, Verticle type three pole and neutral, sheet steel, MCB Distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator).

Supplying and fixing of 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply and fixing of 5 to 32 amp rating 240/415V, 10KA, C curve DP MCB suitable for inductive load of following poles in existing DB complete with connections, testing and commissioning etc. as required.

Supply and fixing of 5 to 32 amp rating 240/415V, 10KA, C curve SPMCB suitable for inductive load of following poles in existing DB complete with connections, testing and commissioning etc. as required.

Submain wiring along with earth wire with the 2 x 1.5 sqmm +1x 1.5 sqmm earth wire (for Plug,Computer, Aquaduard,TV point)g sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Submain wiring along with earth wire with the 2 x 2.5 sqmm +1 x 2.5 sqmm earth wire(Power Plug) sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Submain wiring along with earth wire with the 2 x 6 sqmm +1 x 6 sqmm earth wire(AC) sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Submain wiring along with earth wire with the 2 x 16 sqmm +1 x 16 sqmm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Supply and making end termination with brass compression gland and aluminium lugs for 3.5 x 300 sqmm (82mm) size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kv grade as required.

Supply and making end termination with brass compression gland and aluminium lugs for 3.5 x 50 sqmm (35mm) size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kv grade as required.

Supply and making end termination with brass compression gland and aluminium lugs for 4 x 25 sqmm (28mm) size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kv grade as required.

Supply and making end termination with brass compression gland and aluminium lugs for 2 x 16 sqmm (22mm) size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kv grade as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

SITC of 1200 mm sweep, BEE 5 star rated, ceiling fan with brush less DC motor, class of insulation-B, 3 nos blades, 30cm long down rod, 2 nos canopies, shackle kit, safety rope, copper winding, pf not less than 0.9, service value (CM/M/W) minimum 6.00 air delivery minimum 210cum/min, 350rpm(tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75degree C max, insulation resistance more than 2 mega ohm, suitable for 230V, 50Hz, single phase AC supply, earthing etc. complete as required.

Supplying and fixing Two Module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

  Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer Gl pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soit (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing M.V. danger board notice plate of 200mm*150mm made of mild steel, latest 2mm thick, vitreous enameled white on both side and with inscription in single red colour on front side as required.

Supply and Fixing of 63 Amp. 4 Pole MCCB(25KA) C curve

Supply and Fixing of 63 Amp. 4 Pole MCB(10KA) C curve

Supply and Fixing of 63 Amp. 4 Pole RCCB(10KA) having 300mA current sensitivity. Make-Indoasian or equivalent

Supply and laying of 50 Sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and laying of 300 Sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Submain wiring along with 4×25 Sqmm + 2×16 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect 2620 system lumens, 120 Lm/W, PF0.95, THD10%, CRI 80, sheet thickness min 0.8mm, Tube with aluminium heat sink, 300V over voltage protection, 2.5 KV internal Surge Protection, with 5year warrantee CAT AAA

Supply and fixing of IP 20, Front Lit, Mid Power SMD type LED Light, recess/Surface mounting round 18 Watt to 20 Watt, Cut out Min 150 mm, Height Min 40 mm,, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, High purity / transmisivity UV Stabilized Non yellowish diffuser/ Reflector for uniform light distribution, detachable driver set, suitable for 24 Hr Continuous Operation, Complete in All respect. 2160-2400 system lumens, 120 Lm/W, PF0.95, THD 10% at full load, CRI 80, , 300V over voltage protection, 2.5 KV internal Surge Protection, with 5 years warrantee CAT AAA

Supply and Fixing of 9 watt LED DECORATIVE WALL light Complete in all Respect.Make Havells or Equivalent 360-720 systems lumens, 120lm/W, PF › 0.95, THD 10% , CRI80, Model-LHFOAJD1TZ1I060 or equivalent.

Supply and fixing of 15 watt LED wall light (Bi Directional) Complete in all Respect. 1200 systems lumens, 140lm/W, PF › 0.95, THD 10% , CRI80, Make Havells or Equivalent Model- CLIOWLS15WLED830PSYMTOTG or equivalent.

Supply and fixing of decorative 40 Watt to 45 Watt, LED Post top indirect light luminaire having Pressure die cast aluminium body and UV Stabilized PC Clear/ frosted glass cover, with driver set confirming to IP 66 and IK 08 protection, Potted driver (Not circuitory) complete in all respect. 4800-5400 system lumens, 120 Lm/W, PF0.95, THD 10% at full load, CRI 70, 300V Over Voltage Protection and auto restart feature, 4 KV internal Surge Protection, with 5 years warrantee. CAT AAA

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 60Watt. to 72 Watt. Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour. 7200-8640 system lumens, High Power LED with lenses, 120 Lm/W, PF0.95,, Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & 300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT AAA

Supply and Fixing of L.E.D. Bulbs, 15W app. Make Havells or Equivalent

Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.

Supply and Fixing of Heavy Duty Exhaust Fan 300 mm size sweep 900 RPM single phase including cartage and fixing Complete in all respects.Make Havells or equivalent

Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.

Supply, Installation, Testing and Commisioning of 15 KVA 3 Phase 415V, 50Hz liquid cooled silent DG Set based on CPCB-4 guidelines comprising of diesel engine of reputed make. Fitted on a common base frame along with other accessories i.e AMF panel, battery charger, first fill of lube oil, 4 nos. chemical electrode earthing, 16 sqmm 3.5 cor Al 40 meter cable of reputed make as per PWD specifications, with 20 meter 16 sqmm copper as earth cable and changover etc. complete in all respect. including cost of freight charge from ex. works to site place, etc. Two Year warranty. Compelete in all respect. (i) Voltage-415 +- 2% volt (ii) Rated output -Minimum 15 KVA (iii) Fuel Tank Capacity Minimum 30 ltr. (iv) Governing class-G2 or As per BIS (v) Noise level 75dBA or as per norms of CPCB-IV (vi) No. of cylinder-Minimum 3 (vii) Speed 1500 rpm (viii) Insulation class-H

Supplying, installation, testing and commissioning of 450 Ipm at 35 m Head electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Providing, laying, testing & commissioning of 65 mm dia 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 80 mm dia 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 100 mm dia 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel

Supplying, fixing, testing and commissioning of 100 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Supplying, fixing, testing and commissioning of 80 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of 80mm dia non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 100 mm dia non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 80mm dia stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supplying and fixing of 40m first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way-100 mm dia M.S. Pipe

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supplying, installation, testing and commissioning of floor mounted dust and vermin proof LT power distribution outdoor Panel compartmentalised cubical type with ingress protection of IP 55 having front and back openable double fold doors provided with neoprene rubber gasket with pad locking arrangement and insulated door handles, minimum 350 mm deep with 4 strip 100 amp. capacity, suitable length aluminium busbars on SMC / DMC insulators, 3 Nos. LED indicator lamps (R.Y.B) with 3 Nos. toggle switches and 2 amp capacity SP MCB "C" curve protection of each LED lamp, the body fabricated from 2 mm thick CRCA sheet (with front and back tapered top / roof fabricated from 3.00 mm thick CRCA sheet), 35 mm X 35 mm x 3 mm MS angle iron frame work all round at the bottom 75 mm X 40 mm X 4.4, mm MS channel as base, 25 mm x 5 mm G.I strip as earth bar at the rare end, suitable accomodation from supplying and fixing the following switchgears and accessories, connections, interconnections with suitable size of FRLS copper conductor single core cable, control wiring inside panel for metering, and protection etc. with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable and door earthing with 4 sq.mm FRLS PVC insulated copper conductor single core cable and 1 No., M.V danger notice plate of 200 mm X 150 mm made of mild steel, at least 2.00 mm thick and vitreous enamelled white on both sides and inscription in single red colour on front side, painting with siemens grey powder coated paint to give a smooth surface after cleaning and finishing with 7 or more tank process, providing suitable size brick foundation of 225 mm width in three sides or more and having brick wall of total height 1100 mm, 15 mm cement plaster (1:4) on the out side exposed wall for installation of OUTDOOR PANEL complete with excavation, refilling, earthing as required. ,INCOMING, 63 A, 25KA, FP MCCB, Ics = 100% Icu as per IEC 60947-2 with Extended ROM, Spreader Terminals. - 01 Set OUTGOING 32 A, 18KA, TP MCCB, Ics = 100% Icu as per IEC 60947-2 with Extended ROM, Spreader Terminals. - 02 Sets Providing and fixing star delta starter with suitable numbers of AC-3 duty Contactors, 25A Range, 415 volt, 50 Hz, 3 ph, and overload relay with necessary linking and control wiring etc. as required in complete shape star delta starter including ON/OFF Pushbuttons and ON/OFF Indication lamps. Providing and fixing Flush mounting Multifunction Meter with RS485 suitable for measurement in 3 phase, A.C supply,

Fabrication, supply, Installation testing & commissioning of INDOOR TYPE REMOTE PANEL for FIREFIGHTING PUMPS with cubicle construction, WALL mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for Terrace pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING SECTION:auto manual selector switchINDICATION SECTION:LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of AL Bus Bar 100A.OPERATING SECTION:1) Selector switch for AUTO/MANUAL/OFF operation...2Sets.2) Motor ON/OFF push buttons 2Sets.3) Indicationg lamp for motor "ON" 2Nos.

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

Supplying,Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 3.5 Core, 50 Sq.mm-Armoured-Aluminium conductor Power cable.(to be clamped with 25x3mm MS flat clamp)

4 Core, 2.50 Sq.mm-Armoured-Copper conductor control cable.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5CX 50 sq. mm (35mm)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16x4 core.

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices(including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying, installation, testing and commissioning of energy saving & environment friendly laser etched LED emergency exit signage Single/double Sided GREEN/RED of standard size 300x180x25mm, super bright LED's. MS power coated housing with suitable power consumption with inbuilt battery having backup upto2 hours. complete with chain etc as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and fixing 25 mm X 5 mm GI strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.