Public Works Department Tender

Providing laying cement concrete 1:2:4(1 cement, 2 coarse sand ,4 graded stone ballast 20 mm nominal size) includind supply of all materials labour and T&P etc required for proper completion of the work and curing complete also including cost of form work in foundation &floors.

Providing and laying cement concrete 1:4:8(1 cement, 4 coarse sand, 8 graded stone ballast 40mm. Nominal size) including supply of all materials labour and T&P etc required for proper completion of the work and curing complete also including cost of form work in foundation &floors.

12mm. Thick plaster with cement and fine sand of 1.25 FM. Mortar in 1:4

First Class brick workin 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials labour and T&Petc .required for proper completion of the work.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.