Public Works Department Tender

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class deodar wood. (DSR-2021-11.33.2)*0.735

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : : Two or more coats on new work (Ist quality Royal, Silk, Asian/Berge) as per (DSR-2023- 13.41.1)*0.735

Finishing walls with Acrylic Smooth exterior paint of required shade : : Two or more coats on new work (Ist quality Royal, Silk, Asian/Berge) as per (DSR-2023- 13.46.1)*0.735

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item. Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. (DSR-2023-25.3)*0.735

Providing and laying gang saw cut , mirror polished pre moulded and pre polished machine cut Granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. as per. Staircase Step Staircase,Platform,Staircase Wall Upto 5 Feet,Urinal partition (DSR-2023-16.87.1)*0.735

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.(DSR-2023, 22.6)*0.735

Maintenance of opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (DSR-2023, 14.4.1)*0.735

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to LS. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (DSR-2023, 11.46.2)*0.735

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm Nominal outer dia pipe. (DSR-2023 18.8.1)*0.735

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm Nominal outer dia pipe. (DSR-2023 18.8.3)*0.735

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm Nominal outer dia pipe. As per(DSR-2023 18.7.5)*0.735

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm Nominal outer dia pipe. As per (DSR-2023 18.7.6)*0.735

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia. As per (DSR-2023 18.52)*0.735

S/f of European type W.C. Sheet 450 mm size with commode cover etc. (DSR-2023 17.2.1)*0.735

Fixing white vitreous china urinal basin One urinal basin with 5 litre white P.V.C. automatic flushing cistern. As per (DSR-2023 17.4.1)*0.735

Providing and fixing one piece construction white vitreous Chinas quitting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern. As per D (DSR-2023 17.6.1)*0.735

S/f of premium type wash hand basin 500x400 mm size of white glazed earthen ware (22"x16") C.P. West coupling and one pair M.S. Bracket and labour charge etc. (DSR-2023 17.7.4)*0.735

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per (DSR-2023 17.31)*0.735

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms. As per (DSR-2023 17.73.2)*0.735

Providing and jointing 150 mm dia Stone ware pipe (to level or slopes and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.2)*0.735

Providing and jointing 200 mm dia Stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.3)*0.735

Providing and jointing 250 mm dia stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.4)*0.735

Providing and jointing 300 mm dia Stone ware pipe (to level or slopes) and jointing with stiff mixture of cement mortar in ration of 1:1 (Cement and fine sand) including testing of pipes and joints complete (DSR-2023 19.1.5)*0.735

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : As per (DSR-2023 19.3)*0.735 150 mm dia (As per DSR No. 19.3.2)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 200 mm dia (As per DSR No. 19.3.3)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 250 mm dia (As per DSR No. 19.3.4)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design 300 mm dia (As per DSR No. 19.3.5)

Supplying and Fixing of PVC gully trap grade "A" Complete with G.I grating brick masonary chamber and water tight C.I. Cover with from of 300 mm x 300 mm size (inside) square mouth traps of "P" or "S" traps. 100 x 100 mm size As per (DSR-2023 19.4.1.1)*0.735

Construction man hole with RCC top slab in 1:2:4 mix foundation concrete 1:4:8 mix inside plaster 15 mm thick with cement mortar 1:3 (cement and fine sand) with a floating coat of neat cement and making a channels in cement concrete 1:2:4 mix finished smooth including curing and testing. Inside size 90x80 cm. and 450 mm deep including CI cover and frame (DSR-2023 19.7.1.1)*0.735

Inside size 120x90 cm deep i/c CI. Cover with frame (heavy Duty) 560mm internal diameter total weight of cover and frame to be not less than 208 kg ( wt of cover 108 kg and weight of frame 100 kg ) As per (DSR-2023 19.7.3.1)*0.735

Providing and fixing unplasticised PVC pipe clips of approved design PvC rain pipes with intel/ outlet bend etc. compete 110 mm dia. as per (DSR-2023 12.43.2)*0.735 110 mm dia

Providing and placing on terrace poly thylene water storage tank of approved brand and manufactured with cover and locking arrangement necessary hooks of inlet etc. complete for tank capacity 100 Ltr. (DSR-2023 18.48)*0.735

Excavating trenches of required width for pipes, cables, etc includig excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and the returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc and disposing of surplus excavated soil as directed, within a lead of 50 m (DSR-2023 2.10.1.12)*0.735

Providing and Fixing shower with 8 mm dia 200x200 mm As per (DSR-2023 18.64)*0.735

Providing and Fixing Long body Bip cock. As per (DSR-2023 18.51)*0.735

12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board false ceiling conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks). (DSR-2023-12.45.3)*0.735

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : (DSR-2023,11.33.1)*0.735 Second class teak wood

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). (DSR-2023, 9.147D1.2)*0.735