Public Works Department Tender

Providing and applying tack coat with bitumen (VG-10) using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. (Over WMM & DBM)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen (VG-10) using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. (Over BC)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Constrution of embankment with material obtain from borowpits with all lifts and leads, tranporting to site , spreading grading to required to slope and compacting to meet required table No 300-2.

Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is excluding of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes

Providing and laying of hot appiled thermoplastic compound 5.00 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is including of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes Repeated Bar

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting type-IV vide clause 801.3, fixed cover aluminum sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The retro reflective sheeting shall be tested for A certificate having the sheeting tested for coefficient of retro reflection day time color and luminance shrinkage fixable liner removal adhesion impact resistance specular glass and fungus resistance 3 year out door weathering and its having passed these tested shall e obtained from international/Government Laboratory/Institute by the manufacture of the sheeting and in case the certificate obtain from international condition it should also be obtain from Indian condition within 3 year of launching of product by the manufacture in aboard Alliteratively a certificate conforming to ASTM Specification (D 4956-09) on arterial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally in such a situation the Employer/ Client if so desires could seek for a performance guarantee which be released after of certificate meeting the requirement of three year outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should be as per MoRTH specification No-801.3-7 proof of the same in form of government report shall be uploaded while quoting tender (as per IRC:67-2012 clause 14.60) Speed Limit Board

Providing and fixing of Retro Reflective high intensity informatory/cautionary sign board size 1200x900mm made of 2 mm alloy aluminium sheet and 4 mm thick APC sheet fully covered with intensety retro reflective sheet having approved massage fully proceed by AVERY DENSION CO. (U.S.A.) equivalent equipment as per specified brand back of aluminium sheet will be provided frame 35x35x5 mm angle iron painted with two coat smoke grey of sky blue paint. Leg 75x40 mm channel, 3 meter long complete (size 1200x900mm) 1.08 sq mtr)

Providing and fixing of averry dennision/3 M Brand RPM serie 290(CAT Eye) (RED/ YELLOW COLOUR) Made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflective in wet and Dry conditio with bitumen adhesive BT 69. (Without Sank)

Supply and instalation of dalinators (Roadway indicators, hazard makers, object makers) 80-100 cm.high above ground level ,painted in black nand white in15 cm.wide strips fitted with 80x100 mm rectangular or 75mm dia circular reflectorised panel at thae top burried or pressed into the ground and conforming to IRC:79 and the drawing.

Supply and fixing W-Metlic beam crash barrier including concreeting in M-15 grade as per drawing and design and as per direction of E/I.

Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches.

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km (5 miles) from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work.

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.

Random course Rubble massonary in 1:4 cement and fine sand mortar in foundation and plinth, including supply of all materials, labour & T&P etc. required for proper completion of the work.

Providing and laying reinforced cement concrete 1000 mm pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.

Raised pointing with cement and fine sand of 1.25 fineness modulus mortar on brick work in proportion of 1:2 including supply of all materials, labour and tools and plants etc. required for proper completion of the work

Cement concrete with 20mm gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. 279(a)

12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 4 part of find sand of 1.25 fineness modulus.