Public Works Department Tender

M-150 brick work in 1:3 (one cement and three coarse sand . mortar) in foundation and plinth and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T S.I no 307

12mm. Thick plaster with one part of cement and three part of approved coarse sand including supply of all materials labour and completion of work.Including making of groove in plaster surface and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T S.I no 583

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI NO 255

Concrete with 4cm. Guage stone ballast fine sand of 1.25 F:M. and cement in proportion of 12:6:1 in foundation and under floors and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI NO 281

R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 raft foundation and footing with 4cm. Gauge stone ballast. excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc.and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T Binding wire to be supplied by the contractor free of cost. S.I NO 287

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI NO 504

Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts and nuts and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI NO 503

Supply and fixing of galvanised corrugated iron roofing 24 BWG in position and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T and also including wastage

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other fange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the celling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws 230 mm interval, including fixing of gypsum board to celling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound jointing tapes finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all co plete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm ge gypsum moisture resistant board and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (LKo SOR Chapter 14 item 12.45.3)

Providing and laying vitrified floor tiles (BELL / KAJARIA / SOMANI or other standard make) in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4( 1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI NO CH 14 NEW ITEM 4

Supply and fixing of (anodized aluminum door having 2 min aluminium section excluding costing and an average costing of 20 micron fully gland made of aluminum door tube sine 83.3 x 44.65 m as vertical member and 1140 44.45 mm sim tube in bottom and horizontal member door chaukhat should be of minun table vertical with th hen openable shutier the rate including cost a of material of glass handles lock scary sending and fixtures exclading cost of floor spring if ropaired for proper completion of the work, as per direction of lingineur in charge .Same as in tem no. 14 but with 5.000 mm thick plain glass complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SOR Ch12 new ITEM no 15

12 Wall panelling providing and fixing in position wall panels of plain phenol formaldehyde synthetic resin tiles over kail wood frame and provision for providiong switch board fixtures etc. an per drawing complete with polishing and finishly with french/Wax polish as per dircation given by Engineer-in-charge.Same as in item no. 12 above but with one side laminated instead of plain board and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SOR Ch12 new ITEM no 14

Providing and fixing in position double skin wooden partition with fibre or particle hoard frame of 900 x 1200 rectangular of section 50 x 38 mm covered with 12 mm thick teak wood particle board commerial quality on both face duly painted two coats of high gloss synthetic enamel paint over one priming paint complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.TSOR Ch12 new ITEM no 10

Providing and fixing white vetreous china pedestal type water closet (European type) W.C. pan with ISI marked white solid plastic seat and lid with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 17.3.1)

Providing and fixing Single sqauatting plate with 5 litre P.V.C. automatic flushing cistern one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T SI No 17.6.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 18.51.1)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T(SI 17.31)

Providing and fixing P.V.C. waste pipe for sink or wash basin size 40mm dia. including P.V.C. waste fittings complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 17.28.1.2)

One urinal basin with 5 litre white P.V.C. automatic flushing cistern and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 17.04.01)

Providing and fixing brass stop cock of approved quality: 20mm bore and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 18.16.02)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm bore(SI 18.53.1) and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T GeM Product id: 5116877-82407674146

Providing and fixing G.I./First quality high pressure CPVC pipes of dia.20mm or higher complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall : and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 18.10.2)

Providing and fixing PVC pipe, 6 kg/ per sq.cm. pressure 10cm. Dia. including cutting and making good the walls etc. linternal work - Exposed on wall : and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 730A)

Providing and fixing of ceilling fan with BLDC motor of approve quality and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T GeM Product id: 5116877-29857064105

Providing and fixing of propeller type ac ventilating fan-exhaust of approve quality and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T GeM Product id: 5116877-81689073117

Providing and fixing of 12 w LED ceiling light of approve quality and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701of 750ltr capacity marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (SI 18.48)

Providing and fixing of mislanious Electrification ect complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built standerd tubular sections/approprate Z sections and other sactions of approved make conforming to IS:733 and IS: 1285 fixing with dash fasteners of required dsa and size. including necessary fitting up the gaps at junctions. I.a at top bottom and side with required EPOM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/panelling, C.P. beass/stainless steel screws. all complete as per architecural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (Sl. 21.1) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15) and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (DSR Sl: 21.1.1.1)

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EMPD rubber/neoprene gasket required (fitting shall be paidc for separately) (Sl: 21.1.2), Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15) and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (Sl: 21.1.2.1)

Providing and fixing aluminium tubular handle bar 32mm outer dia 3.0 mm thick and 2100 mm long with SS screw etc. complete as per direction of Engineer-in-charge. (Sl. 21.12)Anodized (AC 15) aluminium tubular handle bar and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (Sl. 21.12.1)

Providing and fixing Brass 100 mm mortice and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (Sl. 21.13)

Providing and fixing aluminium casement windows fastner of required length for aluminium windiws with necessary screws etc. complete. (Sl. 21.15) Anodized (AC 15) aluminium and including all labour, material, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T (Sl: 21.15.1)