Public Works Department Tender

Painting with valsper or other approved high grade enamel complete one coat over previously painted surface including supply of all materials, labour and tools and plant etc. required for proper completion of the work varnish to be used should confirm I.S.I. No. 105/106/133-1950 As in item 647(b) +648 a above but for every subsequent coat on previously treated surface.

P/F 600x450 mm beveled edge mirror of superior glass .with C.P. brass screws and washers complete. as per DSR code no 17.31.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (SI. No. 18.50.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore (SI. No. 18.49.1)

Scraping old white or colour wash including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR P-41 Sr. No.-19

20 mm nominal dia Pipes

P/F PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm as per DSR Code No. 18.65.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR code no 17.1.1)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR P-40 Sr. No.-7

P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass Waste of standard pattern, including painting of fittings and brackets, cutting and making goog the walls wherever require: DSR code no 17.7.4.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (SI. No. 18.52.1)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :DSR-17.5.1

Renewal panes of glass in door, window & ventilators of fixing in new work with 4.00mm thick glass planes fixed with brads & putty including supply of al material, labour T&p etc Required for completion of work .

Dismantling door or window including Chaukhants but excluding hold fasts and including stacking of materials as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR P-41 Sr. No.-14

25 mm nominal dia Pipes

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as per DSR Code no. 18.53.1.

P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR code no 17.28.2)

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR P-41 Sr. No.-17

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Lettering and painting of Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface cautionary /warning Lettering and painting in R.T.O Office Boundry and wall. SOR 2018 MORT & H 6.09

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colour sand shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. DSR-1141A.3.1

Plain Cement Concrete (PCC) M-10(1:4:8 Nominal Mix) in open foundation complete as per drawing and techanical specification DSR-4.1.8

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Sl. No.18.7.1,2,3) 15 mm nominal dia Pipes

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR P-40 Sr. No.-2

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plainflush door shutter of required ecomprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheathusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimumdensity of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistanceto spread of flame of Class A category with property of beingte/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required sizewith necessary full body threaded star headed counter sunk S.S screws, all as per directionof Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid Sapteroly 35 mm thick (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR-26.87.1