Prayagraj Smart City Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Prayagraj Smart City Limited Tender
Other Consultancy Services
Consultancy Services
Eprocure
Opening Date31 May 2023
Closing Date9 Jun 2023
Tender Amount₹ 3,34,62,900
Costs
EMD
₹ 10,00,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PSCL_807742_1Bid Award Id
ViewTender No
164/PSCL/2023-24Tender Authority
Prayagraj Smart City Limited ViewPurchaser Address
-Website
http://https://www.prayagrajsmartcity.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Removal of plant/ ficus growth by pulling out root system embedded in masonry, cutting stem and branches carefully and safe disposal of cutted wood at designated dumping site. Girth over 0.15m to 0.30m
12
30996
2583
Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.
90
56406
626.74
Careful removal of existing deteriorated/ damaged/ weathered lime plaster without damaging the suurface below it. Caution: Workers have to wear helmet,safety belt and safety gloves
2950
267653
90.73
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Lime mortar
6.5
4073
626.74
Dismantling of old wires and conduits including making good of all damage and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
1100
21758
19.78
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
area 3 sq. metres and below
90
24324
270.27
area beyond 3 sq. metres
10
3701
370.13
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 Of sectional area 40 square centimetres and above
4
13123
3280.8
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
500
1430
2.86
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 mm
355
29603
83.39
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
35
38737
1106.78
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
650
127302
195.85
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
30
4638
154.6
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge. 2.6.1 All kinds of soil
22
4035
183.43
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
1750
445305
254.46
Propping with steel to support the leaned structure ( roof and wall) using pipes, channels, angles, girders , wooden wages to prevent further leaning/ collapse
10
10590
1059.06
Construction of temporary store for shifting of material from the building using GI sheets 0.45mm thickness with supporting using hollow round/ square pipes. And dismantling the same thereafter completion of work. (Size 6mtr x 10mtr x 3mtr height) covered on all five sides including base concrete 200mm with providing exit/ entry door.
1
350000
350000
Carefully shifting of furniture, old machineries, equipments etc other material from the building to temporary constructed store within the building premises within 50 mtrs. Vacating the building complete at the start of work (12 labourers per day working for 10 days) DSR 2021 0114
1
50000
50000
Removing of old sulphated lime wash/white or colour wash in multiple applications without causing damage to the below stone/brick/plastered surface. Scrubbing (not by scraping which leaves surfaces scarred and scratched ) with bristle brushes and hot water ( Care to be taken if the surface is weak one it will break down). Hot water should be used if the limewash has an oil or tallow binder. Gentle cleaning with air abrasive tools can be used if the wall surface is not very week.The final clean will almost invariably have to be carried out by hand scrubbing and rinsed with clean water on completion. The work should be done under supervision of a trained conservator.
1210
564682
466.68
Raking out the joints of country/Nankshahi brick, scooping out dead and decayed mortar very slowly and carfully with scooping rods, then washing complete with hand spray pump. Preparing the surface for replastering including disposal of rubbish with 250m lead
4160
540176
129.85
Repointing of raked out joints of Brick masonry by using lime mortar 1:1:1 (1Lime:1coarse sand:1 Surkhi)
1210
513983
424.78
Water repellent treatment associated with long lasting biogrowth protection with Organosiloxane based and wide spectrum biocides mixture, ready to use product in dearomatised White Spirit, applied by brush on double coating wet on wet Note: for porous substrates consider to increase the quantity of product accordingly. Repeat coats if required.
1210
797123
658.78
Lime concrete terracing on roofs average thickness 10 cm laid to fall with lime concrete comprising of 1 Slaked lime: 1 sand: 2 brick aggregate (25mm nominal size) finished with 2% linseed oil by weight of lime mixed with 20mm layer of lime mortar 1:2 (1 lime : 2 fine sand)
Note: Burnt oil or waste engine oil not to be used as it no more had water repellant properties.
570
1391113
2440.55
Providing and Making Gola (batta) in lime concrete using 50% lime surkhi / sand mortar 1:2 with 12mm brick aggregate, along joints of wall and terrace finished with lime surkhi mortar 1:2 plaster with gur, gugal, methi etc as per traditional practice in concave /approved shape of (size 75mmx75mm)
265
68245
257.53
Making khurras 45 x 45 cm with average minimum thickness of 10 cm lime concrete 1:3:6 (1 Slaked lime :3 surkhi : 6 coarse sand) with graded stone aggregate 20mm nominal size over PVC sheet 1m x 1m x 400 micron, finished with 12mm lime plaster 1:3 (1 Slaked lime : 3 Coarse sand), rounding the edges and making and finishing the outlet complete.
45
17636
391.92
Refixing of existing rain water spouts
30
7500
250
Providing and fixing rain water spouts as per existing original design and size from the site in MS plates
15
16500
1100
Providing and laying jointless Polydee-LM or equivalent, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.
610
898310
1472.64
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)
1550
470115
303.3
Brick work with non modular bricks of class designation 7.5 in superstructure up to two level: Lime mortar 1:1:1 (1 Lime putty: 1 surkhi: 1 coarse sand)
6.3
49887
7918.61
Brick work in plain arches/vaults in superstructure above plinth level and upto 15 meters height (or upto floor five level, whichever is lower) including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in lime mortar 1:1:1 (1 lime: 1 surkhi: 1 coarse sand).
3.1
42791
13803.72
Construction of Jack arched roof using Rolled steel joists, fired clay bricks with Kafgi mix recommended by by UNESCO
11
111188
10108.03
Lime plaster 1:2 (1 Slaked lime : 2 Coarse sand): 20mm thick in two coarses. First coat will be in 12mm and second coat will be in 8 mm.
1400
1992550
1423.25
Repairing ornamental plaster works to match with the existing design using lime plaster (1lime putty:1surkhi)
271
937353
3458.87
Making cornice band with ornamental design as per the conservation Architect's design with lime plaster (1lime:3 finesand): Size 100mm wide and 50mm average thick
212
129383
610.3
Making cornice band with ornamental design as per the conservation Architect's design with lime plaster (1lime:3 finesand): Size 150mm wide and 50mm average thick
194
146774
756.57
Lime punning with lime putty mixed with Gur,Bilgri,Urd and other ingredients followed by grinding to fine paste for smooth finish
2950
1256257
425.85
Laying lime flooring‐Providing and laying lime concrete(1 lime:3 coarse sand) up to 100mm thickness tamping and compacting properly which is follwed by laying of Lime mortar 1:3 up to a thickness of 20mm.Rework on it to get desired smooth surface
70
137456
1963.67
40 mm thick fine dressed sand stone flooring over 20 mm (average) thick base of lime mortar 1:2 (1 lime: 2 coarse sand), including pointing with lime mortar 1:2 (1 lime: 2 coarse sand) with an admixture of pigment to match the shade of stone.
216
241377
1117.49
Heritage floor tiles over 20 mm (average) thick base of lime mortar 1:3 (1 lime: 3coarse sand) with joints finished flush.
653
2084682
3192.47
Removal & refixing of stone chajja 50-75mm thick stone used to be similar to the existing once at the site or as directed by E-i-N, cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respects in lime surkhi (1: lime putty: 2 surkhi)
27
35964
1332
Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in lime mortar 1:1:1 (1 lime : 1Surkhi:1 Fine sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in lime mortar 1:1:1 (1 lime : 1Surkhi:1 Fine sand), including pointing in lime mortar 1:2 (1 lime cement : 2 stone dust) with an admixture of pigment matching the stone shade. White sand stone
21
40172
1912.99
Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design
15
71414
4760.99
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/
masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.)
Epoxy injection grout in concrete/RCC work of approved make
54
41858
775.16
Repairing of .5mm to 5 mm wide open joints / cracks in all types of sand stone masonry work including scrapping of loose jointing material from cracks. The inner side to be filled/pointed with polymer mixed lime mortar with wooden trowel and fixing grouting nipple from outer side as directed by Architect. Then apply polymer based lime mortar by injection grouting through 5mm diameter nozzle through the pre fix nipple up to total thickness of existing stone wall and removing the PVC nipple pipe, lime moratr of mix lime & sand 1:1 mix with polymer using katha or other additives to achieve require matching colour and including cost of all materials, labour, machinery, equipment, curing and cleaning the site as directed.
62
4477
72.21
Providing and fixing chicken wire mesh (6mm x 6mm) of 24 gauge 200 mm wide along the joints of brick work with hooks/nails etc. complete so as to receiving the plastering work over chicken mesh as per the direction of Engineer‐in‐charge.
34
40377
1187.56
Stitching of cracks in brick masonry with stone lintels of 450x 200x50 mm . Chasing, grooving the brick masonry and inserting the stone lintel. All around the stone, lime mortar should be properly packed .
26
6758
259.94
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer- in- charge.
210
36804
175.26
Providing & fixing on roof Country clay tile of 6 mm nominal thickness and of approved size and as per approved pattern on bamboo frame work complete
42
64946
1546.35
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood
4.06
476966
117479.42
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with 11.33.1 Second class teak wood
35
146578
4187.95
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters
27
89303
3307.54
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
55
109567
1992.14
Providing and fixing panelled louvered shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters
21
178135
8482.63
Repairs, renewing & refixing of existing damaged teak wood openable, straight / paneled / glazed shutters for doors or windows as per the original design and pattern fixing with screws and nails, making good of all holes, pits, etc with sawdust and resin, applying approved wood preservative. Item to also include making all the mouldings, removing existing paints and design of the panels as in the original details as per size etc., The area of the shutter includes the entire opening with all the leaves.
129
273637
2121.22
Repairs, renewing & refixing of existing damaged teak wood openable, straight / paneled & louvered shutters for doors or windows as per the original design and pattern fixing with screws and nails, making good of all holes, pits, etc with sawdust and resin, applying approved wood preservative. Item to also include making all the mouldings, removing existing paints and design of the panels as in the original details as per size etc., The area of the shutter includes the entire opening with all the leaves.
32
108708
3397.15
Providing and fixing 12mm toughened glass, with necessary screws.
Second class teak wood 35 mm thick
110
1224986
11136.24
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Wedge expansion type Fastener with threaded dia 12 mm
50
2359
47.19
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type)
300
61314
204.38
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
100
33424
334.24
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm
30
4293
143.13
Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
210
38457
183.13
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm
15
3658
243.92
Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.
346
26444
76.43
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 Upto 5mm depth and 5 mm width
234
17812
76.12
Polyurethane polish (PU) two or more coats to give required finish including two coats of wood sealer including preparation of surface base complete as per specification
150
219900
1466
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
55
9398
170.89
Cleaning of enamel/modern/synthetic paint with help of suitable chemical
74
17777
240.23
Consolidation of woodwork with sawdust and polyster resin of low viscosity, wherein the work needs to completed in similar application and then smoothen and finished as per the Engineer incharge.
74
83093
1122.88
Removal of rust, existing coatings, mill scale, dirt, oil, grease, and other contaminants from steel sections/stone surface using Micro sand with the help of pressure pump.
42
13017
309.93
Protection against corrosion of metals (IRON BASED) using rust converter approved by Conservation Architect/Material Conservator in charge, applied directly to an iron or iron alloy surface to convert iron oxides (rust) into a protective chemical barrier. Coverage Area= 12-15 sqm per litre
42
7280
173.35
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc
95
16769
176.52
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
225
22491
99.96
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes
560
77448
138.3
Supplying chemical emulsion in sealed containers including delivery as specified.
2.34.1 Chlorpyriphos emulsifiable concentrate of 20%
200
35876
179.38
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 ce- ment : 2 coarse sand) to the full depth of the hole :
2.35.4.1 With Chlorpyriphos E.C. 20% with 1% concentration
150
4788
31.92
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
170
39093
229.96
Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos E.C. 20% with 1% concentration
80
18296
228.71
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in lime mortar 1:2 (1lime : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required
36
24485
680.16
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
34
4928
144.96
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.1 Marble work/ stone work
110
24052
218.66
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 23.2.1 All types of soil. 300 mm dia
150
92505
616.7
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 23.3.3 200 mm nominal size dia
120
101995
849.96
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 23.13.3 200 mm dia
1
250
250.85
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 23.14.3 200 mm clamp
1
1631
1631.25
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 23.15.3 200 mm dia
2
550
275.49
Providing & Installation tubewell boring approximate 100 mtr. Deep,10HP electric pump of approved make to deliver the required water pressure along with required electrical installations & connection pipe etc.Complete all work as per engineer in charge.
1
200000
200000
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 18.12.2 : 20mm dia nominal bore
15
4223
281.56
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 18.12.3 : 25mm dia nominal bore
15
5597
373.17
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore
1
311
311.47
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
1
354
354.87
Job Design a holistic museum and its galleries. This position ensures that the museum visitors experience is of the highest quality and fulfilment by maintaining the scientific and aesthetic integrity of exhibits and dioramas. Provide appealing print content and old photographs for visitor interaction. Design and provide aesthetic placement/ framing all museum objects, artefacts and artwork. Provide print/ digital contents for museum events, signage and museum collection labels. Provide and install museum collection information display boards. Design and fabrication of museum dioramas and all exhibit components. (Content, display articles, diorama display material, items of historic value and old photographs to be provided by the Client to the contractor. Contractor to prepare design plan for display of items only.) Restoring, polishing repairing all movie equipments boxes etc to a level so as they can be put as a exhibits (need not be bought to level of operation)
1
1000000
1000000
PARTITION/ PANNELING WORKS Providing and fixing MDF/ marine plywood one side fixed upon internal framework of MS Box sections/ teak wood sections of size 50mm x 50mm at a spacing of 600mm in a square grid in a straight or curved design (MS box section/ teak wood framework section to be paid in separate items). The framework shall be covered by means of adhesives and screws. The framework must take support wherever desired from the floor & ceiling only & the floor must not be punctured at any spot (unless otherwise approved beforehand by the architect). All internal MDF/Plywood to be treated with antitermite treatment as well as with wood preservative. Item to include creating design to incorporate fitting an LED light fixture as instructed by the Architect. All exposed MDF to MDF joints shall be neat & well finished and staggered if required to avoid cracks. Make: century 710/ greenlam/ greenply or equivalent. Framing to be paid seperately.
-
-
-
12mm Plywood
155
286750
1850
18mm Plywood
130
339300
2610
12mm MDF board
175
229250
1310
Providing and fixing wooden laminates/ mica over wall panelling/ partitions/ museum display diromas 1mm thick to be fixed by means of adhesive/ glue of approved brand as per colour &design to be approved by architect with joints neat and well finished and no bubble to be there. Make century/ greenlam/ greenly or equivalent
250
363750
1455
Providing and fixing decorative teak veneer 3mm thick over wall panelling/ partitions/ museum display diromas to be fixed by means of adhesive/ glue of approved brand as per colour &design to be approved by architect with joints neat and well finished and no bubble to be there. Make century/ greenlam/ greenly or equivalent (Piant / polish to be paid in separate item)
140
243600
1740
Providing and fixing over wall or partition, teak wood moulding/architraves as per design given by the architect to be fixed as per location given in the form of chair rail, mouldings, trims, edges, or as indicated. Item to be finished in duco/high gloss/metallic lustre of approved shade as instructed by the architect by sanding, applying primer and lambi/putty to the all surfaces 3 times, as per shade approved to be used on the same moulding.
-
-
-
Wooden moulding - 30 mm to 50 mm width
178
90780
510
Wooden moulding - 80 mm to 120 mm width
95
88160
928
4" - 6" wide and 1" thick architrave
115
167325
1455
Providing and fixing in place Laser cut MDF partition / panel of 18 mm thickness supported on the floor or any other surface with adequate fixing as per detailed drawings or as directed by the Architect. Contractor to ensure the laser cutting is done exactly as per the design provided and in case of any errors or rectification is required for the same due to unsatisfactory work the contractor needs to carry out the same as part of rectification works.Item to include all hardware like nails, screws, preparing of samples of laser cut panels for necessary approvals from the Architect before finalizing and finishing the same etc, complete.
40
278200
6955
Providing & fixing 8mm thk toughened clear fixed glass cover over museum dioramas/ showcases doors with glass to glass joints for housing artefacts as instructed by the curator/engineer/Architect. with SS Studs as per their specification and requirement. with all hardware type and its sizes and placement to ensure the cover is sturdy. Item to include all necessary hardware, spider & patch fiitings, pharmas, SS plates or angles required to ensure the glass screen is fixed properly etc. complete. The front glass panel to be fixed to the side glass panels using glas to glass SS patch fittings / SS patch hinge fittings as approved by Architect to allow the front panel to be openable for access to the inside of the unit.Item to include all necessary hardware, adhesives, SS wall to glass and glass to glass patch fittings and glass to glass hinge patch fittings, glass locks,
18
158400
8800
Providing & fixing 10mm thk toughened clear fixed glass cover over museum dioramas/ showcases doors with glass to glass joints for housing artefacts as instructed by the curator/engineer/Architect. with SS Studs as per their specification and requirement. with all hardware type and its sizes and placement to ensure the cover is sturdy. Item to include all necessary hardware, spider & patch fiitings, pharmas, SS plates or angles required to ensure the glass screen is fixed properly etc. complete. The front glass panel to be fixed to the side glass panels using glas to glass SS patch fittings / SS patch hinge fittings as approved by Architect to allow the front panel to be openable for access to the inside of the unit.Item to include all necessary hardware, adhesives, SS wall to glass and glass to glass patch fittings and glass to glass hinge patch fittings, glass locks,
10
99700
9970
Providing and fixing/placing 3d models made by a professional modelmaker in monochrome effect. showing the details of the specific scene/ event/ topography/ building. Item to include complete painting of the models as per instructions given by the Architect. base size 10’x10’. height upto 10inches. To be used in museum dioramas.
1
1155000
1155000
Providing and making P.O.P. mouldingsincluding grooves in wall, opening side vertical band, architrave, lintel, pediment, ceiling, cornice band etc whenever indicated by architect all surfaces to be checked for proper line & level
-
-
-
(A) 50(2") - 75mm (3")
135
61425
455
(B) 75mm (3") - 100mm (4")
110
61600
560
(C) 100mm (4") - 150mm (6")
90
63180
702
(D) 150mm (6") - 230 mm (9")
40
39520
988
(E) 230mm (9") - 300 mm (12")
50
61800
1236
(F) 300mm (12") - 375 mm (15")
55
80960
1472
Providing and applying duco paint of approved brand such as Asian paints/Dulux or equivalent to wooden or any other surfaces including 1 coat of primer and preparing the surface by applying 1 coat of 'Duco lambi' and then spraying 2 coats of Duco paint. Incase of any bubble formations or any damages or cracks observed the item to include rectification of the same including scraping and redoing the same. Item to include cleaning, primer, lambi coat, preparing samples for approval of colour and quality by Architect, scaffolding etc. complete
40
92000
2300
Providing and applying supergloss premium enamel paint to achieve mirror like finish of approved brand such as Asian paints/Dulux or equivalent to wood or any other surface by sanding and scraping with the help of emery paper with an application of duco thinner. All the minor cracks, uneven surfaces to be smoothened and filled with putty as instricted with staining as per colour approved to achieve high glossy and smooth surface. Samples for the same to be shown to the Architect for approval
65
25350
390
Providing and fixing wall paper of approved brand and make as indicated by the architect. Item to be executed on top of finished wall surface / putty finish surface. ( Basic Rate of the wall paper - 250 Rs/ sq.ft) and as approved by the Engineer in charge.
21
97860
4660
GRAPHICS WORKS Providing and fixing eco/ digital vinyl prints of signage text / high resolution images printed in required colour to be pasted or installed on the glass partitions or any other surface of approved size and design as directed by by the Architect. Vinyl sheet to be installed taking utmost care to avoid any stains on glass panels, formation of any air bubbles etc. In case of the installation or printing is found unsatisfactory the sheet to be replaced with new with necessary corrections as part of rectification works. Item to include all necessary tools, vinyl and printing, scaffolding if required etc. complete
175
281750
1610
Providing and fixing digital print Sunboard laminated panels of text and high resolution images of matt finish as per size shown and design as per drawings provided or as directed by the Architect. Signage of approved design to be printed on the sunboard panel and the same to be fixed as per necessary fixing details as directed by the Architect or any other method required. Item to include providing necessary samples of sunboard signage for necessary approvals from the Architect before printing, procuring and fixing the same on site with the help of counter sunk screws or mirror screws.
115
273700
2380
Providing and fixing 40mm - 75 mm Individual cut Brass letters chrome finish around 5-8mm thick of approved finish, to be glued to door lintels or any other area as indicated in the drawing or as directed by the Architect. The letters to be cut as per the font type and size as directed by the Architect including providing initial samples of the same for approvals from the Architect before procuring and fixing the same on site. Utmost care to be taken that the letters are aligned and at equal distance from each other as directed. Item to include all necessary hardware, sampling, adhesives, scaffolding if required etc. complete
120
294000
2450
Provision and fixing wood cut letters for title signage as per drawing attached including all necessary fitting like screws, nails, etc. Item to include complete finishing of the letters inclusive of primer and duco paint as per shade approved by the Architect.
-
-
-
ranging from 75 mm to 100 mm of side depth of 25 mm.
168
63840
380
ranging from 150 mm to 200mm of side depth of 25 mm
154
110880
720
ranging from 230 mm to 300 mm of side depth of 25 mm.
72
82800
1150
Fabrication and installation of powder coated SS bollards of grade 304 with ear hooks as per approved design. The bollards shall be 1000 mm high with average diameter of - 50mm and 2mm thick depending on the design provided in the drawings or as directed by the Architect. Item to include providing base plate fo around - 200mm diameter 5mm thick of design as shown in the drawing or as approved by the Architct.Item to include all necessary tools, hardware, necessary welding, showing samples of the bollard and base plate for necessary approvals before procuring and installing them on site etc. complete. (yellow brass colour)
30
69300
2310
Providing and fixing brass chains of required size and length to hang light fittings or any other fitting or item as directed by the Architect. The brass chain to be covered with velvet cloth of approved type and colour fixed around the chain using velcro. Item to include providing hooks on either sides for hanging of fittings and anchoring the chain in the ceiling or any other surface as required, necessary hardware, scaffold if required etc. complete (yellow brass colour)
160
174400
1090
Providing and fixing framed antique prints and pictures in wood printed on photo glossy paper from a photo lab, as specified by the architect in the specified location complete with all fixing etc., Item to also inculde installation and nothing extra payable in case of any damage till the completion of the site. The size of the mounting to be 2" minimum from all sides of the picture and frame to be as per sample approved by the Architect (upto a width of 2")
-
-
-
(12"X 8")
30
43500
1450
(12”x18")
56
108640
1940
(18”x24”)
48
182400
3800
Making artistic wall paintings over well prepared putty/ smooth surface by local artist in heritage royal themes/ patterns/ geometric patterns including best available collars in the market (Asian/ Dulux/ Berger/ Royale) including scaffolding complete and protecting it till the complete handover of the museum as per direction of Architect. Visuals/ samples to be shown before painting.
62
53940
870
Making artistic wall paintings over well prepared putty/ smooth surface over cornices/ mouldings by local artist in heritage royal themes/ patterns/ geometric patterns including best available collars in the market (Asian/ Dulux/ Berger/ Royale) including scaffolding complete and protecting it till the complete handover of the museum as per direction of Architect. Visuals/ samples to be shown before painting. (width 100mm to 200mm)
95
37810
398
Providing & fixing Reception table of size 8'0" x 2'0" and 2'6" high in 19mm thick commercial plywood used for top, verticals & internal shelves, 8mm thk commercial plywood used for backing & 19mm thick commercial plywood shutters. The table top to be projecting from the table vertical surfaces / floating and to have a visual thickness of around 3" - 4" as shown in the drawing or as indicated by the Arhcitect. The storage area to include necessary shelves, drawers with telescopic channels with shutters using concealed hinges and other details as indicated by the Architect. All exposed surfaces to be finished in duco paint with lacquer/ polish with high gloss and internal surfaces to be finished in enamel paint of approved shade and colour and texture as indicated by the Architect. Item to also include 10 mm thk glass with bevelled edges over the table top surface to be embedded and made flush as instructed. The rate shall be inclusive of adhesive and all the hardware like nails, screws, telescopics channels, concealed hinges, locks, handles, knobs etc. required to complete the item. All exposed hardware shall be brushed steel finish.
1
44860
44860
Supplying a Solid wood centre table (T3) of size 1200mm X 600mm X450mm with an old teakwood top. The table support and top frame shall be out of 75mm X 75mm teakwood section as per the profile shown in the image and drawings. Item to include providing T.W. moulding of approved design and size as shown in drawing along the edges of the table top. The table shall have 25mm thick teak wood bracing member fixed to the legs at a lower level of design and size as shown in drawing and image. All internal and external surfaces shall be finished with approved french polish and table top shall be finished with approved colour stained matt PU coat. The rate shall be inclusive of adhesive and all the hardware like nails, screws, etc. required to complete the item. Item to include spray coating all the surfaces with approved anti termite solution as directed by the Architect or Engineer in Charge
4
66000
16500
Supplying a Solid wood SideTable (T4) with a top of 450mm diameter, 600mm high and 25mm thickness in old teakwood top with one joint in the centre. The table shall be supported on 1 teak wood 75mm thk leg. Item to include providing T.W. moulding of approved design and size as shown in drawing along the edges of the table top. The table shall have 25mm thick teak wood bracing member fixed to the legs at a lower level of design and size as shown in drawing and image. All internal and external surfaces shall be finished with approved french polish and table top shall be finished with approved colour stained matt water based PU coat using approved coloured stainers of the same company. The rate shall be inclusive of adhesive and all the hardware like nails, screws, etc. required to complete the item. Item to include spray coating all the surfaces with approved anti termite solution as directed by the Architect or Engineer in Charge
5
42500
8500
Providing and placing the side tables/teepoy's of 15"x 15" upto a height of 18" as per image shown. Tables to be made in teak wood with curved/straight legs as per image. Item to include making carved or moulded legs and rims as detailed by the Architect at the time of execution. Tables to be inclusive of all hardware and handles as per sample approved by the Architect. Tables to be finished in french polish/distressed paint finish as approved by the Architect.
8
76800
9600
Providing and fixing a Decorative Console table of size 1500mm X 750mm X450mm with an old teakwood top as shown in the image. The table support, legs of top frame shall be in old teakwood. All internal and external surfaces shall be finished with approved french polish and table top shall be finished with approved colour stained matt PU coat. The rate shall be inclusive of adhesive and all the hardware like nails, screws, etc. required to complete the item
6
111000
18500
Supplying Executive Chairs having a high back . Chair to have an upholstered seat and back rest in leather, old teak wood arms and body as per design approved by the Architect. All exposed wooden surfaces shall be finished with french polish. Seat shall be as per the image, using high density finished with fabric of the approved colour and texture. The base should be a Swivel base with castors cladded in Wood.
1
18500
18500
Supplying Single arm chair with high back and wooden arms for VIP Visitors chair. The chair shall be constructed in old teak wood with all details and mouldings as per the image or equivalent. The chair to have a upholstered medium back and a seat as per image. All exposed wooden surfaces to be in French polish and the uplostery to be in fabric.
6
66000
11000
Providing and fixing upto 700mm long single seater sofa having an upholstered seat, in old teak as shown in the image. All exposed wooden surfaces shall be finished with french polish. Seat shall be as per the image, using high density U-foam finished with fabric of the approved colour and texture
10
197500
19750
Providing and fixing Chair in old teak wood without arms and a carved wooden back as per design approved by the Architect. All exposed wooden surfaces shall be finished with french polish. The chair to have a upholstered seat as per image. For orientation/ lecture hall for general public seating.
35
306250
8750
Providing and fixing 4 - 5 seater 2400 mm long bench with a carved wooden back as per design on site and having wooden seat in old teak as shown in the image. All exposed wooden surfaces shall be finished with french polish.
2
91000
45500
Providing and fixing 1800mm long 3-seater sofa having an upholstered seat, old teak wood arms and an upholstered back with frame as shown in the image. All exposed wooden surfaces shall be finished with french polish/distressed paint finish. Seat shall be as per the image, using high density U-foam finished with fabric/pure leather of the approved colour and texture
4
210680
52670
STAFF FURNTIURE Providing and fixing Executive Tables in L-Shape with main table to be of 1.5 x 0.9 M, height 0.9m and the side credenza to be 1.0 x 0.45 M as shown in drawing or as indicated by the Architect. All construction to be in 19mm Commercial Plywood with the table top and outer side of the table to be made by sandwiching two plywoods to achieve a thickness of 38mm for the same. Item to include 10mm bevelled edge glass to be placed above the table top and to be recessed if required as indicated. The Main Table to have a Modesty panel screen below the table top made out of 19mm commercial plywood. The side credenza to be shorter in height than the main table by 3" - 4" as indicated by the Architect and to have plain plywood shutters outside and shelves inside with all construction in commercial plywood. The Main Table top and Side panel to be finished with teak wood finish veneer and polished with approved shade, the modesty panel to be painted with duco paint/ polish and lacquer coat on both the sides of approved shade and colour as indicated by the Architect. etc. required to complete the item. All exposed hardware to be brushed steel finish. All exposed surfaces of the side credenza to be finished with duco paint/ polish and lacquer coat and internal surfaces to be finished with enamel paint of approved shade and colour as indicated. Item to include all necessary adhesives, hardware like screws, nails, telescopic channels, concealed hinges, locks
1
41985
41985
Providing and fixing 600 mm wide Staff Workstations in running length as per size of the room and design as shown by the Architect. The table to be cantilevered from the wall with exposed visual thickness of the table around 75mm as directed. All construction to be in 19mm commercial plywood with necessary supports as directed. Item to include providing 10mm thick clear glass with bevelled edges over the table top with the glass recessed and flushed with the top surface if required and as directed. All exposed surfaces to be finished with teak finish veneer and polished with approved shade as indicated by the Architect. The rate shall be inclusive of adhesive and all the hardware like nails, screws, telescopic channels for drawers, locks, handles etc. required to complete the item. All exposed hardware shall be brushed steel finish.
10
65850
6585
Providing & fixing 450 mm deep table height storage/overhead storage as shown in the drawing or as indicated by the Architect. Storage to be built in 19mm thick commercial plywood with 8mm thk commercial plywood used for backing. Shutters to be openable of approx. 450mm - 525mm width & shall be raised from the floor by 19mm & the storage base shall be 38mm thick. All exposed surfaces of the storage shall be finished in Duco paint/ polish with Lacquer coat and internal surfaces will be finished in enamel paint as per shade and finish approved by the architect. Storage rate shall be inclusive of adhesive, all the hardware like nails, screws, concealed hinges, locks, handles, towerbolts ball catch etc. required to complete the item. All exposed hardware shall be brushed steel finish.
11
257950
23450
Providing and fixing standard office chair nylong base with castor having adjustable height with gaslift, having fixed pp arms and cushioned seat and net seat back finished with fabric/of the approved colour and texture
12
88200
7350
Providing and fixing seating puffs (single seater) in old teakwood 500mm high supported with old teakwood legs on all four sides upto 40mm dia as shown in image. The seating to be upholstered with fabric of the approved colour. The item includes complete matt polish etc.
8
49600
6200
Providing and fixing wooden double door office almirahs 1800mm high, 400mm depth, 900mm width in old teakwood. The almirahs to have shelves and drawers inside as per clients requirement and one safe locks. The wooden almirahs to be painted with polish as per approved color. complete with all necessary fittings and accessories.
5
187500
37500
Providing and laying Carpet, of required width, design and colour as directed. Item to include procuring samples of carpet for approvals from the Architect before procuring the needed quantity and laying on site etc. complete.
20
129000
6450
Designing, weaving and installing curtains of best quality in required shades and patterns incorporating heritage style patterns/ shapes design with 200mm frills on top with frills having resham threads verticals at last in cotton fabric as per design provided by Architect. Samples of designs to be shown for approval. (Mode of measurement: length and breadth to be measured only. No folds to be taken)
58
324800
5600
Providing and supplying brass planters : Item Description: Brass Planters (Large) Dimensions: 12"W x 12"D x 7.5"H
10
37800
3780
1.5 TR star rating 3 star
12
556758
46396.56
1.8/2 TR star rating 3 star
7
348600
49800
Drain piping Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes
160
100168
626.05
32 mm nominal dia Pipes
40
28510
712.75
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 200 mm width X 50 mm depth X 1.6 mm thickness
50
34450
689
Coring and drilling holes for passage of electrical/ drain pipes into brick walls and making good the holes complete. Utmost care to be taken while coring holes and not to disturb the original brick wall fabric.
-
-
-
upto 100mm dia & 400mm length
55
77550
1410
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2250
524250
233
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1400
385000
275
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
167000
334
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
70
30730
439
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
155
5890
38
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
95
4465
47
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20mm
1890
241920
128
25mm
2310
334950
145
32mm
330
60720
184
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25mm
230
58880
256
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amps switch
490
50470
103
15/16 A switch
70
10920
156
3 pin 5/6 A socket outlet
120
14640
122
15/16 A socket outlet
70
13790
197
Telephone socket outlet
10
1480
148
TV antenna socket outlet
5
740
148
Bell push
4
560
140
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
3690
369
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
60
17880
298
3 Module (100mmX75mm)
25
8175
327
4 Module (125mmX75mm)
50
17150
343
6 Module (200mmX75mm)
53
21306
402
8 Module (125mmX125mm)
58
26332
454
12 Module (200mmX150mm)
55
30085
547
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
60
7980
133
3 Module
25
3775
151
4 Module
50
7900
158
6 Module
53
9646
182
8 Module
58
12238
211
12 Module
55
14960
272
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 Run of cable
3500
199500
57
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way, Double door
5
12865
2573
Supplying and fixing following way, Vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
8 Way (4+24), Double door
2
20330
10165
12 way (4+36), Double door
3
38499
12833
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
130
33280
256
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
2
870
435
63 A
1
527
527
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
1
970
970
63 A
2
2068
1034
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 A
2
4056
2028
40 A
1
2642
2642
63 A
1
2722
2722
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 A
1
2586
2586
40 A
1
3188
3188
63 A
1
2872
2872
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified
1
10040
10040
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
5
255
51
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
5
720
144
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
2440
244
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 35 sq. mm
250
96750
387
Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/31⁄2 core/4 core ISI marked with alu. stranded /solid conductor
-
-
-
Armoured 2 core 10 sq mm
55
16060
292
4 core armoured 16 sq. mm
110
37730
343
3.5 core armoured 25 sq. mm
85
31705
373
Supply of floor mounting, free standing, totally enclosed, indoor, cubical, extensible, compartmentalized - front operational, vertical type main LT panel, fabricated out of 2 mm thick CRCA sheet steel, powder coated, provided with hinged detachable, lockable, front and back openable comparmentalised individual chamber doors, including strengthening with 35 mm x 35 mm x 6 mm angle iron frame work complete as required. The panel shall be powder coated and suitable for IP 42 degree of protection with the following mountings detailed out here under :
Incoming
1 No. 160A FP Automatic Change Over arrangement of Contactors & timers. with Indication lamps for EB & DG supllies.
1 No. of 160 Amp TP MCCB with heavy duty solid neutral link of 25 KA Breaking capacity with ON/OFF indicating lamps and 2A Fuse back-up
Bus Bars 200 Amp TPN colour coded, heat shrinkable PVC sleeved Aluminium bus bar of suitable length.Outgoings 6 Nos. 63A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.
Main DB as described above (Any other extra item to be paid seperately)
1
108360
108360
Lighting Fixtures
-
-
-
SITC of exterior grade wall light having wrought iron finish.Similar to image attached.Size- 400mm height
8
81680
10210
SITC of wall light having antique brass finish.Similar to image attached.Size- max 400mm with 2 bulbs
20
414000
20700
SITC of suspended pendant glass design min 9" Dia with Antique wrought iron finish components with cap and knob at bottom having 3 bulbs arrangement
2
64000
32000
SITC of table lamp having antique brass finish.Similar to image attached.Size- max 500 mm Height having two bulb arrangement. Light to have fabric lampshade as approved by architect
6
84600
14100
SITC of Chandelier having wrought iron finish.Similar to image attached.Size- max 750 mm Dia x Height Proportionate with 6 bulb arrangement
2
76000
38000
SITC of deep hand cut glass design Handi of 9" Dia with Brass Antique finish components with brass cap and knob at bottom having 3 bulbs arrangement
26
247000
9500
Supply, installation, testing and commissioning of Linear light fixture suitable for outdoor facade lighting applications. The luminaire must have highly efficient LED from CREE/OSRAM/LUMILEDS/ NICHIA/ SEOUL with L70 of 50,000hrs minimum. Power Consumption shall be 18 -20W. Luminaire optics shall be highly efficient, UV and temperature-resistant lens systems.Optional lenses to achieve beam angles 10/15/30/45/60°/20*45°/10*60° with Light output color : 3000K. Rated input supply of 100-240 AC, 50-60Hz.Power Factor: 0.9, THD15%. The body of the fixture must be made of 7 tank processed Aluminum Extrusion and powder coated as per the customers requirement. with clear glass or diffuser with suitable IK07 rating to sustain any outer objects from damaging the fixture. The luminaire must be weatherproof with minimum IP66 rating with operating temperature : 0°C to 50°C and humidity : 10% to 90%. Housing must have adjustable bracket to set the light and illuminate to required area.
8
111952
13994
Supply, installation, testing & commissioning of round ceiling recessed led down lighter (IP20), the main body should be made of aluminium die cast with a radiant surface that gives high heat dissipations, with following specifications: Delivered lumen output should not be less than 400 lumen and power should not be more than 7 watts, beam angle 40°, CCT 3000 kelvin, CRI ≥ 85, Mcadam Step-3 LEDs, minimum 50000hrs @ Ta 25° C remote non dimmable led driver (IP20), fixed version, the overall diameter should not be more than 75mm. The light fixture color should be matching with ceiling paint. The fixture installation should be complete with all resepcts and other required hardware and accessories like connectors etc.
30
135270
4509
Supply, installation, testing & commissioning of focus light 9W (IP20), the main body should be made of aluminium die cast the overall diameter should not be more than 75mm. The light fixture color should be matching with ceiling paint. The fixture installation should be complete with all resepcts and other required hardware and accessories like connectors etc.
60
243780
4063
Supply, installation, testing & commissioning of 45degree angular cove light profile (IP20), with a radiant surface that gives high heat dissipations, with following specifications: Delivered lumen output should not be less than 500 lumen per meter and power should not be more than 10 watts per meter, diffused, CCT 3000 kelvin, CRI ≥ 85, Mcadam Step-3 LEDs, minimum 50000hrs @ Ta 25° C remote non dimmable led driver (IP20), the overall section size should not be more than 20mm X 20mm. The fixture installation should be complete with all resepcts and other required hardware and accessories like connectors etc.
32
37504
1172
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
3
8190
2730
Supplying, erection and testing of approved make wall mounting fan oscillating type with base, blades, guard, speed regulator etc. AC 230-250 volts with connections and including raw bolt/anchor hole fastener etc. complete finished and as required. 400 mm sweep
30
90270
3009
Supplying and fixing of deluxe fresh air fan with louvers (ventilating fan) with self-closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required 250mm RPM1300/1400
5
9715
1943
Supply and fixing following Telephone/voice/Data /Lan modular socket on the existing modular plate including connections but excluding modular plate etc. as required. (a) RJ - 45 Socket.
25
22875
915
16 Channel Network Video Recorder with Cameras with 30 days storage and all required active/passive component including all set up wire and ficing excluding conduiting as per enclosed quotation
1
113194
113194.92
Supply, installation testing and commissioning of 8 port PoE switch with 2 SFP ports, having security features like port security supports 64 MACs per port, auto surveillance VLAN, loopback detection automatically disables a port when a loop is detected, cable diagnostics allows administrators to determine cable status, UTP cat. 5, cat. 5e (100 m max.), full/halfduplex for 10/100 MBPS, full-duplex for 1000 MBPS, auto MDI/MDIX adjustment for all twisted-pair ports, switching capacity, 40 GBPS, maximum 64 bytes packet forwarding rate, 14.88 MBPS, ports1 to 8 compliant with 802.3at
1
23024
23024
Fire Fighting: Downcomer System
(Area of Building: 27.2mtr x 23.2mtr = 631.04sqm;
631.04 x 400 = Rs. 252416)
1
252416
252416
Development of site: Horticulture Works: Horticulture operations including 300mm earth filling, grassing, tree plantations/ shrubs and potted plants etc. (Area of Building: 27.2mtr x 23.2mtr = 631.04sqm;
631.04 x 275 = Rs. 173536)
1
173536
173536
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements