Prayagraj Smart City Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Prayagraj Smart City Limited Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Jan 2022
Closing Date16 Feb 2022
Tender AmountRefer Documents
Costs
EMD
₹ 7,25,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PSCL_675047_1Bid Award Id
ViewTender No
2002_PSCL_2022Tender Authority
Prayagraj Smart City Limited ViewPurchaser Address
-Website
http://https://www.prayagrajsmartcity.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent
design mix)
15.33
-
686.05
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
4.5
-
1623.53
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
10
-
513.25
Dismantling brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In lime mortar
50
-
388.42
In cement mortar
90.11
-
939.75
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
104
-
179.15
Of area beyond 3 sq. metres
17
-
245.31
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
10
-
37.6
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
In lime mortar
10
-
669.18
Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured):
-
-
-
In lime mortar
50
-
224.68
Dismantling wooden floors and partitions, excluding supporting members but including stacking within 50 metres lead :
-
-
-
Up to 10 mm thick
46.93
-
30.38
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
3
-
431.49
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
-
-
-
R.S. Joists
2000
-
1.59
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres.
6500
-
0.3
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
10.12
-
28.92
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
G.S. Sheet
32.5
-
82.33
Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
135.9
-
116.47
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
-
-
-
Of sectional area 40 square centimetres and above
10
-
2303.1
Of sectional area below 40 square centimetres
50
-
9.21
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres :
-
-
-
Of sectional area 40 square centimetres and above
75
-
439.51
Of sectional area below 40 square centimetres
375
-
1.75
Dismantling vinyl flooring without damaging the sub base, including stacking material within 50 metres lead.
180.82
-
41.36
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
bituminous road
425
-
198.71
Dismantling C.I., G.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
100 mm dia pipe
200
-
35.66
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
50
-
13.18
For thickness of tiles above 25 mm and up to 40 mm
175.62
-
59.51
Dismantling of old wires and conduits including making good of all damage and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
1000
-
19.79
SURFACE AND SITE CLEANING
-
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1236.3
-
8
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
Beyond 30 cm girth upto and including 60 cm girth
20
-
245.58
De-vegetation of plants of girth of not exceeding 225 mm from monument/structure by removing bushes, trees including complete uprooting from the wall & roofs/structures carefully including suitable chemical treatment to roots to avoid further growth including disposal of rubbish to nearest Municipal dumping ground. Lead as per direction of Engineer incharge.
50
-
470.55
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping round, all complete as per direction of Engineer-in-Charge.
2007.25
-
32.76
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
1000
-
215.39
Removing white or color wash by scrapping and sand papering without causing damage to the below stone/ brick/ plastered surface.and preparing the surface smooth including necessary repairs to scratches etc. complete.
5679.51
-
56.91
Steam cleaning of stone cladded surface covered with mild/thin deposition including paint, algae, lichen, mosses etc using steam cleaner. (A conservator can cover only about 8 - 10 sqm in a day in such cases working about 6-7 hours in a day. The machine needs about 30 minutes for boiling water hence breaks have to be taken.)
4108.27
-
658.78
Protection against corrosion of metals (IRON BASED) using rust converter approved by Conservation Architect/Material Conservator in charge, applied directly to an iron or iron alloy surface to convert iron oxides (rust) into a protective chemical barrier. Coverage Area= 12-15 sqm per litre
100
-
173.39
MASONRY WORK
-
-
-
Brick work with non modular bricks of class designation 7.5 in superstructure up to two level: Lime mortar 1:1:1 (1 Lime putty: 1 surkhi: 1 coarse sand)
100
-
7918.61
Consolidation of loose/damaged stone masonry or redoing of masonry work including careful dismantling of stone, cleaning of mortar and reconsolidating using reusable stone masonry with lime mortar 1:2.
-
-
-
Ashlar Masonry: Considering 75% reusable and 25% new stone for consolidation.
50
-
8564.91
WOOD WORKS
-
-
-
Frames & Trusses: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Second class teak wood
15
-
121946.28
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
-
-
-
Wedge expansion type
-
-
-
Fastener with threaded dia 10 mm
30
-
26.96
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)
-
-
-
Second class teak wood
-
-
-
35 mm thick shutters
50
-
3230
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
Second class teak wood
30
-
1392.47
5.0 mm thick glass panes (weight not less
than 12.50 kg/sqm).
30
-
1760.2
Providing and fixing 12mm toughened glass, with necessary screws.
Second class teak wood 35 mm thick
276.03
-
11136.24
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
100x60x2.50 mm
60
-
78.28
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
200x10 mm
10
-
57.15
Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
-
-
-
250x20x6 mm
20
-
64.4
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
20
-
812.8
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
-
-
-
125 mm
40
-
96.74
25 mm wooden planking, tongued and grooved, including fixing with iron screws complete with : Second class teak wood
244.39
-
3764.9
Repairing existing door shutters including cutting the decayed part, replacing it with wooden piece of same design, size and thickness, fixing with screws and nails, making good of all holes, pits, etc with sawdust and resin, applying approved wood preservative and disposal of unserviceable material to the nearest Municipal dumping ground. (Assuming 10% to be replaced)
20
-
1209.29
Providing and fixing Q spider glass connector (double arm) in 304 stainless steel, 200mm x 50mm for glass thickness 8mm to 13mm.
100
-
1441.4
FLOORING
-
-
-
40 mm thick fine dressed sand stone flooring over 20 mm (average) thick base of lime mortar 1:2 (1 lime: 2 coarse sand), including pointing with lime mortar 1:2 (1 lime: 2 coarse sand) with an admixture of pigment to match the shade of stone.
50
-
1117.49
Pointing on stone work with lime mortar 1:2 (1 lime : 2 fine sand) :
1500
-
139.81
Cleaning of stone flooring using detergent or any other cleaning agent as approved by conservation architect including rubbing/polishing of stone flooring, all complete.
1500
-
52.95
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. White sand stone
139.54
-
939.98
ROOFING
-
-
-
Sandstone (polished and machine cut) of thickness 18 mm for cladding under vaults (veneer work), backing filled with a grout of average 20 mm thick in lime mortar 1:2 (1 lime : 2 coarse sand), including pointing with lime mortar 1:2 with an admixture of pigment to match the stone (To be secured to the backing by means of cramps, pins, etc, which shall be paid for separately).
31.29
-
3667.79
Brick work in plain arches/vaults in superstructure above plinth level and upto 15 meters height (or upto floor five level, whichever is lower) including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in lime mortar 1:1:1 (1 lime: 1 surkhi: 1 coarse sand).
6.01
-
13803.72
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2000
-
80.2
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
-
-
-
0.80 mm thick with zinc coating not less than 275 gm/m²
100
-
618
Lime concrete terracing on roofs average thickness 10 cm laid to fall with lime concrete comprising of 1 Slaked lime: 1 sand: 2 brick aggregate (25mm nominal size) finished with 2% linseed oil by weight of lime mixed with 20mm layer of lime mortar 1:2 (1 lime : 2 fine sand)
Note: Burnt oil or waste engine oil not to be used as it no more had water repellant properties.
1773.16
-
2440.55
Providing and Making Gola (batta)in lime concrete comprising of 1 Slaked lime: 1 sand: 2 brick aggregate (25mm nominal size), along joints of wall and terrace finished with lime surkhi mortar 1:2 plaster with gur, gugal, methi etc as per traditional practice in concave /approved shape of (size 75 mm x 75 mm)
469.7
-
219.86
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
50mm average thickness
100
-
138.81
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
Bars upto 12 mm diameter
100
-
5.44
Providing and Repairing the damaged surfaces of column, beam, ceiling and chajja using Polymer Modified Mortar (PMM) by following steps:1) Applying Bond Coat (1:1.5) between old concrete and PMM, or between two layers of PMM as the case maybe2) Applying PMM, made by mixing by weight in ratio 1:5:15 Polymer: lime: quartz Sand. on the damaged area. In layer maximum thickness of 20mm not exceeding overall thickness of 40mm. Polymer should have solid content over 35% and Quartz sand should be a mix from mesh size 8 to 80. with water as required but not exceeding 30% of cement.(The rate is for 20 mm thickness only).
200
-
1043.96
Relaying of roof tiles in lime mortar as per approved pattern on timber sloping roof applied with waterproofing. (Waterproofing to be paid seperately)
175.62
-
691.68
Repairs to wooden joists/ beams with rotten ends using the wood with matching grains and other properties, all complete including the temporary proping.
2
-
13169.76
Reinforcing timber beams with 100 mm wide and 12 mm thick flitch plates that is sandwiched between two timber members or any other approved arrangement to increase the strenght of beams including nuts and bolts as required.
500
-
1774.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
In 75x75 mm deep chase
352
-
137.2
WATER PROOFING
-
-
-
Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.
1018.85
-
1472.64
Water repellent treatment associated with long lasting biogrowth protection with Organosiloxane based and wide spectrum biocides mixture, ready to use product in dearomatised White Spirit, applied by brush on double coating wet on wet Note: for porous substrates consider to increase the quantity of product accordingly. Repeat coats if required.
1482
-
658.78
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
171
-
517.72
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface, excluding grading, compete.
736.31
-
608.75
FINISHES
-
-
-
Lime plaster 1:1:1 (1 slaked lime :1 surkhi: 1 fine sand) 20mm Thickness Double Coat. First coat will be in 12 mm and second coat will be in 8 mm.
1635.9
-
491.6
Distempering with water based washable distemper of approved brand and manufacture to give an even shade :
-
-
-
New work (two or more coats) over and including water thinnable priming coat with cement primer
3779.51
-
112.95
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2100
-
130.01
Painting with oil type wood preservative of approved brand and manufacture:
-
-
-
New work (two or more coats)
812.62
-
36.46
Polishing on wood work with ready mixed wax polish of approved brand and manufacture :
-
-
-
New Work
812.62
-
102.43
Painting with anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
-
-
-
One or more coats on old work
500
-
52.15
Repointing of raked out joints of Ashlar masonry by using lime mortar 1:1:1 (1Lime:1coarse sand:1 Surkhi)
2007.25
-
424.78
SPECIALIZED & OTHER MISCELLANEOUS WORKS
-
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
4560
-
126.13
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with lime/cement mortar 1:2 to the full depth of the hole :
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
2130
-
27.09
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
462.35
-
239.85
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
432.06
-
197.3
Providing and installing steel construction, heavy duty adjustable jacks.
50
-
2296.22
Restoration of stained glass work by cleaning and buffing of the metallic frames with the help of suitable chemicals, cutting of coloured Italian/Belgium glasses according to the designs and fixing the glasses on the frames, filling of POP along the edges according to the designs and preserve them as per directions of Chemist-In charge.
20
-
51850.48
Conservation of metal plaque with the help of suitable chemicals, retouching of the lost colors and providing a preservative coating. The work should be done under supervision and approval of Conservation Architect.
0.5
-
10693.36
Providing and fixing all complete worn out architectural/decorative elements in white sand stone like parapet, finials, etc. to match original design and workmanship in sand stone using SS dowels and adhesive, all complete.
5
-
46857.93
Extra for intricate carving of stone elements all complete including disposal of waste to nearest Municipal dumping ground.
50
-
3592.83
In depth consolidation of stone (only porous material) with ethyl silicate applied by brush/ dabbing till rejection in a stone temperature range of 5-35 Celsius Degrees, protecting the treated area from direct sun and water for the following three weeks. Note: for porous substrates consider to increase the quantity from 10% till 30% for the very porous one. Note: There should be no humidity in weather while application. Surface should be completely dried.
1482
-
591.03
Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): Up to 300 mm dia
1
-
5649.65
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/
masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.)
Epoxy injection grout in concrete/RCC work of approved make
2
-
775.16
REFURBISHMENT OF INTERIORS
-
-
-
Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).
Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587
Design as approved by Conservation Architect
509.52
-
1519.53
Providing glazing in shutters of cuboards.
4 mm thick glass pane (weight not less than
10kg/sqm).
203.81
-
1431.23
Providing ISI marked Stainless Steel butt hinges of required size with necessary screws. (Shutter area to be measured).
254.76
-
173.43
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
100
-
115.8
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm
100
-
222.42
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin-charge.
50
-
348.65
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
Triple strip vertical type
100
-
44.85
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.
Sal wood
5
-
85644.15
Providing and installation of light weight exhibition panels (standalone/wall mounted) including stand, etc.
30
-
458.45
Dutchman Repair using teak wood to fill a void larger than can be done with filler alone or to produce and fix missing/broken part, all complete.
2
-
11703.1
Painting with oil type wood preservative of approved brand and manufacture:
300
-
35.87
Polishing on wood work with ready mixed wax polish of approved brand and manufacture :
300
-
105.85
Providing and fixing stainless steel cramps of required size and shape for anchoring existing iron shelves to existing wall securing in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in walls wherever required.
50
-
613.7
ANCILLARY STRUCTURES & SITE DEVELOPMENT
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
749.18
-
143.96
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
210
-
253.95
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
9.21
-
6721.96
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
5
-
7274.36
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Foundations, footings, bases for columns
16.74
-
214.13
Lintels, beams, plinth beams, girders, bressumers and cantilevers
21.13
-
452.45
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.
941.32
-
162.7
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
37.3
-
8700.48
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Hot rolled deformed bars
3729.88
-
81.13
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
62.7
-
5950.18
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
62.7
-
6849.55
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
6.4
-
2049.5
CEMENT PLASTER (IN COARSE SAND)
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
133
-
210.19
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth
upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia.
50
-
302.16
Pipes, cables etc. exceeding 80 mm dia. but
not exceeding 300 mm dia
50
-
417.35
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete.
-
-
-
Depth not exceeding 1.5 m
10
-
137.36
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered):
-
-
-
Depth not exceeding 1.5 m
10
-
59.97
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
1000
-
15.52
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
500
-
42.28
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by
spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
600
-
78.1
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
300
-
515.6
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm
300
-
278.33
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same
2000
-
15.72
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
In rows 5 cm apart in both directions
1000
-
11.61
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed (the cost of sludge, manure and the good earth shall be paid for separately).
1000
-
22.45
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly,
breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
500
-
39.85
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
100
-
145.17
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages,
creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush
cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.)
Open Spaces- 1 mali for 3 acre
6000
-
1.55
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
-
92.15
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats
1000
-
84.72
Providing and fixing of stone signages including material, lettering, installation, all inclusive.
5
-
21020.5
Providing and installation of small bird bath stone fountain including water connections, pump, etc all complete.
1
-
200000
Cobble stone paving with 60 mm thick granite cobble stone as approved by Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) laid and jointed with cement slurry all complete.
596.1
-
1472.75
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with
common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)
101.9
-
937
Providing and fixing 40mm thk stepping stone in kota over rammed earth.
18
-
741.7
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
9
-
5840.77
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding
cast of plant & water)
-
-
-
Shrubs Plant
500
-
3.65
Hedge Plant /Ground cover
500
-
2.45
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3- 4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
500
-
66.9
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic
Pot & as per direction of the officer-in-charge..
500
-
20
FIRE FIGHTING
-
-
-
Providing 4 kg ABC type fire extinguisher including 1 Wall Hook and 1 Discharge Pipe for each fire extinguisher. Fire extinguisher shall be ISI, BIS Mark, ISO and CE Certified Product with minimum 5 years Warranty
10
-
7860
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
80
-
1141
Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
4
-
395
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
300
-
141
Plumbing works
-
-
-
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid
-
-
-
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
2
-
7635.43
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.
-
-
-
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tap.
2
-
3474.57
Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.
-
-
-
Sink without drain board
-
-
-
610x510 mm bowl depth 200 mm
1
-
4701.84
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
1
-
11141.13
Providing and fixing CP brass bib cock of approved quality conforming to IS:8931.
-
-
-
15mm nominal bore
2
-
477.62
Providng and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 grams.
-
-
-
15mm nominal bore.
1
-
779.24
Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931
-
-
-
15mm nominal bore
7
-
550.39
Providing and fixing health faucet with 1 m PVC tube and swivel hook including all fittings (Jaquar Cat No.ALD 573) or approved equivalent.
2
-
2500
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank (500 Litre)
1
-
9500
Providing and fixing soil, waste and vent pipes :
-
-
-
Centrifugally cast (spun) iron socketed pipe as per IS:3989.
-
-
-
100 mm dia
15
-
1185.14
Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S.
4
-
1764.51
Providing and fixing plain bend of required degree .
-
-
-
100mm (Sand cast iron S&S as per IS:3989)
4
-
483.73
Providing and fixing single equal plain junction of reqd. degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
100x100x100mm (Sand cast iron S&S as per IS:3989)
2
-
804.54
Providing lead caulked joints to sand cast iron / centrifugally cast (spun) iron pipes and fittings of diametre.
-
-
-
100mm dia.
10
-
604.62
Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
For 100mm dia. Pipe
5
-
339.3
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
3
-
357.61
Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work
-
-
-
100mm dia cast (spun) iron S&S pipe
26
-
76.51
Providing and fixing GI inlet fitting with 1 or 2 inlets fabricated from 100mm dia GI pipes including making necessary holes and welded GI sockets fixed to CI trap with lead caulked joint and set in cement concrete as per drawing complete.(Payment for CI trap and lead caulked joint shall be made separately.)
-
-
-
100 mm dia (Hopper )
3
-
1800
Providing and fixing C.P. grating (Chilly model Pisto super heavy) or approved equavalent .
-
-
-
75 mm to 100 mm dia
4
-
1050
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). (Exposed)
-
-
-
25mm dia nominal bore
10
-
540.32
32mm dia nominal bore
40
-
619.96
Painting GI pipes and fittings with enamel paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
25mm dia nominal bore
10
-
28.05
32mm dia nominal bore
40
-
33.77
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
15mm nominal bore
5
-
288.53
20mm nominal bore
3
-
317.96
25mm nominal bore
3
-
406.29
32mm nominal bore
4
-
450.4
Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end).
-
-
-
32mm nominal bore
2
-
648.89
Providing and fixing ball valve(brass) of approved quality, high or low pressure, with plastic floats complete.
-
-
-
25mm nominal bore
2
-
439.07
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia pipes
20
-
485.27
20 mm nominal outer dia pipes
25
-
565.13
25 mm nominal outer dia pipes
12
-
688.66
SUBHEAD-IV (A) : DRAINAGE EXTERNAL WORK (DSR ITEMS)
-
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement 1 fine sand) including testing of joints etc. complete
-
-
-
150 mm diameter
26
-
650.54
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes/ Rcc pipes including bed concrete as per standard design :
-
-
-
150 mm diameter S.W./Rcc pipe
111
-
1204.67
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design
-
-
-
150 mm diameter S.W. pipe
26
-
758.73
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
180x150 mm size P type
-
-
-
With Sewer bricks conforming to IS : 4885
2
-
2736.91
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
60
-
542.41
250 mm dia. R.C.C. pipe
15
-
892.27
300 mm dia. R.C.C. pipe
20
-
992.26
450 mm dia. R.C.C. pipe
6
-
1629.71
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With Sewer bricks conforming to IS : 4885
1
-
12723.7
Extra depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With Sewer bricks conforming to IS : 4885
1
-
8555.47
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
With 20x20 mm square bar
30
-
507.27
Supplying and fixing C.I. cover without frame for manholes
-
-
-
560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg
1
-
7670.03
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
1
-
738.93
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
6148.4
Extra for depth beyond 45 cm of brick masonry chamber :
2
-
6204.83
SUBHEAD-V (A) : RAINWATER HARVESTING PIT (DSR ITEMA)
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
All types of soil
-
-
-
300 mm dia
160
-
759.77
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
200 mm nominal size dia
110
-
1068.43
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
10
-
1432.53
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
10
-
1439.9
Supplying, filling, spreading & leveling coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -in- charge.
10
-
1439.9
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
10
-
1627.18
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos crosssectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer- in-charge.
2
-
1334.58
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia having minimum wall thickness 5.40 mm
2
-
2290.31
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
2
-
309.05
200 mm dia
-
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm clamp
2
-
2009.7
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
2
-
339.41
Supplying and fixing C.I. cover without frame for manholes
-
-
-
560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg
2
-
7670.03
Electric Work
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group A
47
-
1050
Group B
115
-
1146
Group C
79
-
1450
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
52
-
678
Group B
73
-
744
Group C
95
-
813
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
8
-
1548
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1530
-
293
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
520
-
214
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1100
-
245
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
300
-
293
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
40
-
365
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
80
-
480
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
55
-
795
4 X 16 sq. mm + 2 X 10 sq. mm earth wire
240
-
1101
Supplying and drawing following pair 05 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
2 Pair
500
-
29
Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
850
-
84
25 mm
420
-
90
32 mm
295
-
92
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amps switch
326
-
124
3 pin 5/6 amp socket outlet
87
-
163
Telephone Socket Outlet
20
-
174
TV Outlet
2
-
174
Data outlet one module for Data Points (RJ-45)
23
-
510
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
19
-
342
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
48
-
32
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
3
-
356
4 Module (125 mmX75 mm)
3
-
420
6 Module (200 mmX75 mm)
10
-
333
8 Module (125 mmX125 mm)
22
-
383
12 Module (200 mmX150 mm)
15
-
434
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
24
-
587
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
39
-
724
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
1 Run of cable
920
-
72
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissining etc. as required
-
-
-
Upto 450mm
4
-
531
DISTRIBUTION BOARDS
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way, Double door
2
-
1760
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
8 Way (4+24), Double door
1
-
11338
12 way (4+36), Double door
3
-
12776.4
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
115
-
291
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
33
-
12
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A
2
-
339
Supplying and fixing of following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A
1
-
1218
63A
3
-
1228
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A
5
-
3067
63A
9
-
3865
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
12
-
1242
LIGHTING FIXTURES AND FANS
-
-
-
Supply of 8W Mirror LED Light luminaire. ( similar to BCLSB 10W LED Mirror light or equivalent)
6
-
272
Supply of 9W Wall LED Light luminaire.
18
-
190
Supply and Installation of Under water light luminare suitable for use with DH 1 X 50W 12 V. Bajaj Cat No:-Sr. no. 161896 , BJUWL 150 DH 12 V.
6
-
6267
Supply and Installation of Decorative wall light fixture made up of Polycarbonate. ( similar to Philips CAT No. EWP300 BASEL, 171309346 or equivalent)
42
-
2351
Supply and Installation of 250 watt Chandlier/Pendant light. Make Decon GLS 3 X 60W 26BM 01
6
-
14256
Supplying and fixing of of Wall fan 1400 mm dia complete as required. Make : Havells, Model : Pacer
57
-
2630
Supplying and fixing of of Pedestal fan 600 mm dia complete as required. Make : Havells, Model : Pacer
18
-
2976
Supply of 1200mm dia sweep ceiling fan copper wound with double ball bearings, blades white in color, ISI marked and 5 star rated complete with capacitor, down rod, split pin , reel but without regulator complete as required. (Similar to Havells make - ES- 50 PREMIUM or equivalent)
19
-
1661
Supply of 450mm dia sweep Heavy wall air circulator oscillating type, Hi speed with 3 speed push buttons, 1440 RPM, with guard and mounting arrangement. (Similar to Havells make - TURBO FORCE or equivalent)
4
-
3261
MAIN DB
-
-
-
Supply of floor mounting, free standing, totally enclosed, indoor, cubical, extensible, compartmentalized - front operational, vertical type main LT panel, fabricated out of 2 mm thick CRCA sheet steel, powder coated, provided with hinged detachable, lockable, front and back openable comparmentalised individual chamber doors, including strengthening with 35 mm x 35 mm x 6 mm angle iron frame work complete as required. The panel shall be powder coated and suitable for IP 42 degree of protection with the following mountings detailed out here under :
-
-
-
Incoming
-
-
-
1 No. 160A FP Automatic Change Over arrangement of Contactors & timers. with Indication lamps for EB & DG supllies.
-
-
-
1 No. of 160 Amp TP MCCB with heavy duty solid neutral link of 25 KA Breaking capacity with ON/OFF indicating lamps and 2A Fuse back-up
-
-
-
Bus Bars
-
-
-
200 Amp TPN colour coded, heat shrinkable PVC sleeved Aluminium bus bar of suitable length.Outgoings 6 Nos. 63A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.4 Nos. 40A 4P MCB of 10kA.
-
-
-
Main DB as described above
1
-
108361
Supply of following size of 1.1kv grade multicore Copper conductor PVC insulated and PVC sheathed armoured cable as per IS : 7098:1988 with upto date amendments.
-
-
-
3½ , 70 Sq.mm Al Ar. XLPE Cable.
80
-
613
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3½ X 120 sq. mm (45 mm)
4
-
716
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
80
-
74
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm dia
40
-
769
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements