Pashchimanchal Vidyut Vitran Nigam Limited Tender

Safe Carriage of Static TVM Meter from Store Centre Sahibabd/Ghaziabad/Noida to site of work & installation including loading and unloading at both ends. Complete work as per requirement of site including all the accessories.

Safe Cartage of 250 KVA Transformer from Store Centre, Sahibabad/Ghaziabad/Noida to site of work & installation including loading & unloading at both side. Complete work as per requirement of site including all the accessories.

Safe Cartage of 400 KVA Transformer from Store Centre, Sahibabad/Ghaziabad/Noida to site of work & installation including loading & unloading at both side. Complete work as per requirement of site including all the accessories.

Safe Cartage of 25/63 KVA Transformer from Store Centre, Sahibabad/Ghaziabad/Noida to site of work & installation including loading & unloading at both side. Complete work as per requirement of site including all the accessories.

Carriage & Erection of ST Pole 11 Mtrs. Long./ PCC pole 8.5 Mtrs. Long from JE Store/Store Center Sahibabad/ Ghaziabad/Noida to site of work including loading & unloading at both side. Complete work as per requirement of site including all the accessories.

Carriage of D/P on ST Pole 11 Mtrs. Long./ PCC pole 8.5 Mtrs. Long from JE Store/Store Center Sahibabad/ Ghaziabad/Noida to site of work & Erection including loading & unloading at both side. Complete work as per requirement of site including all the accessories.

Grouting concreting & Plinthing of Single support on S.T. pole 11 Mtrs. Long as per RESPO norms.

Fixing erection & grouting of stay set complete with binding & Nozzling of stay wire.

Earthing of supports with the help of Earthing rod (Shall be provided by the contractor) & GI wire/earth wire etc. Complete work as per requirement of site.

Carriage of DOG/WEASEL conductor from Store Centre, Sahibabad/Ghaziabad/Noida to site of work and Laying, stringing, binding, jumpering & sagging in 3 phase including loading & unloading at both ends.

Laying of 3x50/70/120/185 sq.mm. 11KV cable putting sand around the cable Fixing of bricks in both sides & top and refilling of trench and its proper ramming including providing necessary loop on both sides.

Carriage of 11 KV Cable Jointing Kit of size 3x50/70/120/185 sq.mm. cable Indoor/Outdoor from Store Centre Sahibabad/Ghaziabad/Noida to site of work & Fixing including loading and unloading at both ends.

Safe carriage of CT/PT from Store Centre Sahibabd/Ghaziabad/Noida to site of work & Mounting of CT/PT Unit on the D/P as per RESPO norms including loading and unloading at both ends. Complete work as per requirement of site including all the accessories.

Mounting, Fixing & Grouting of 11KV Metering Cubical Pannel. Complete work as per RESPO.

Providing & Fixing Stone Pad as per RESPO Norms.

Providing & Fixing LT Pin Clamps (Flat Size 50*6 mm) as per RESPO Drawing.

Providing & Fixing Stay insulator of size 100x115mm. as per RESPO Drawing.

Providing & Fixing Stay Clamps (Flat Size 50*6 mm) as per RESPO Drawing.

Providing & Fixing Earthing Clamps (Flat Size 50*6 mm) as per RESPO Drawing.

Providing & Fixing Corss Arm Holding Clamps as per RESPO Drawing.

Providing & Fixing F-Clamps as per RESPO Drawing.

Providing & Fixing D/P Holding Clamps as per RESPO Drawing.

Providing & Fixing Nut & Bolt of off Size as per RESPO Drawing.

Dismantling of old & damaged Pole PCC/STP off size and carriage to JE Store/Store Centre Sahibabad/ Ghaziabad/Noida including loading and unloading at both ends.

Construction of plinth of size 2MX2MX1.5M above ground level and one ft. below the ground level of 9”. After excavation of 4” earth, brick ballast shall be provided and rammering will be done properly after that a retaining wall of 9” width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled upto one ft. below the top of the plinth. After this brick ballast shall be provided upto 6” from the earth level and froper rammering shall be done. One no. jaal of 12mm MS Tor shall be fixed in the hollow of the plinth and one ft. thick RCC in 1:2:4 ratio of cement , sand and stone ballast shall be laid on the top of the plinth. The 12mm thick plastering shall be done all around the plinth in ratio 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of supervising Engineer. It includes the cost of labour, T&P, carrier etc. required for proper completion of the work (This material will be provided by the Contactor).

Fabrication of wire mesh fencing frames of different size fabricate out of MS angle iron of size 3x3x2M. Each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized within the frame pressed under MS flats of size 40x5mm inside the angle on all four side with help of approx. 20No. Bolts & Nuts of 10mm diameter 45cm legs of frame will be grouted in 1:2:4 cement coarse sand and 20mm gauge stone blast in the size of 0.22x0.22x0.45meter. Each will be painted with one coat of red oxide and two coat of Alluminium paint of approved mark after proper cleaning. Fixing of wire mess fencing around on plinth of T/F with wire gauge 25x25mm, MS Angle 35x35x5mm with gate.