Panchayati Raj Department Tender

M-150 Class brick work in 1:4 cement and Coarse sand of 1.25 fineness modlous in foundation and plinth including supply of all materials, labours and tools and plants etc. required for proper completion of the work. Sl. No 305

Providng & injecting chemical emulsion for pre constructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external permeter of building expansion oints, surrounding of pipes & condult etc. complete ( Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Heptracholor or chlordance will be used The rate of application of plinth area chemical emulsion shall be as follows : (1) Treatment for massonry & foundation 5 liters/Sqm. (2) (2) Back fill in immediate contract with foundation 7.5 liters/ Sqm (3) Treatment of top surface of pinth filling 5 liters/ Sqm. (4) Treatment of junction of wall and floor 7.5 iters/Sqm (5) Treatment of soil along external permeter of building 7.50 liters/Sqm, (6) Treatment of soil under Apron along external permiter 5 liters/Sqm As per Sl No 1

M-150 Class brick work in 1:4 cement and C/sand of 1.25 fineness modlous in super structure including supply of all materials, labours and tools and plants etc. required for proper completion of the work. Sl. No 305+310

R.C.C. work with cement approved coarse sand and 20 mm gauge approved stone grit in proportion of 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of strength not less than M-150 in lintels over doors & windows excluding supply of reinforcement & its cutting and binding but including its fixing & binding necessary centering & shuttering etc. & also inc supply of all materials labour T&P. etc required for proper completion of the work with curing complete. For plinth bend and lintels. Sl. No. 283

Same as item 6 above R.C.C. Beem and Slab 1:2:4 Sl No 284 (a)

2.5 cm. (1") thick 1:2:4 plain cement concrete floor without base concrete consisting of brick ballast, white lime & surkhi in the proportion of 100:16:32 laid in panels finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified above and including. 8 cm. (3") tick base concrete above and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour, T&P etc. required for proper completion of the work. Without base (601b)

Mild steel or irom work of small size and sections such as holding down bolts, hold fast, tie road grating etc (when not included in an overall rates) wrought to required shape as necessary for bedning etc including supply of steel and its wastage including cost of bolts nuts if required welding grinding and making holes sas required for completion of work Angle iron steel door chaukhats Nosing and Z- section Window/Venti. etc. As per Sl.No. 502

Mild steel (ribbed tor steel) or I/W in plain work such as reinforced concrete or reinforcement B/W when not I/C over all rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all (Material not lessued to store. Sl No. 504

12 mm thick in 1:3 Cement and c/sand Below Plinth/ bearing and roof plaster including meterial. Sl No. 583

Supply and fixing 6 mm. (1/4) China white glazed tiles in flooring or in skirting or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required of proper completion of the work. Sl No. 628

Providing and laying of Vitrified tiles in floor with size of 600 mmx600mm (Thickness 8 to 10 mm) with water absorption less than 0.08% and conforming to IS 15622 of approved brand & manufacture in all colors and shade laid with cement based high polymer modified quickset tile adheshive (water bases) Conforming to IS 15477 in average 6 mm thickness grouting of joints (payment of grouting of joint to be made seperately) CPWD item No, 11.41.1

Earth work in filling in ordinary soil excavation to be in the form of regular pits not exceeding vi meter (20) in depth and earth work in embankment to be in 20 Cm. (8) layers including ramming and dressing the surface to required levels and slopes and also including 1.5m.(5ft) lift and 30m (100) lead the earth from cotting to be used in making embankment or to be deposited as spoil banks within 30m.(100) distance as directed by the E/I. S.I. No. 253

Providing and applying white cement based putty of average thicking 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. DSR item No. 13.80

Finising walls three coat with water proffing white cement paint of approved make and quality such as super snowcem durrocem. robiacem guttucem supercem quality and of required shade on undecorated wall surfaces(two coad) overone and inluding one coat white cement promer to give and even shade after thorughly burshing the surface to powdered materials including curring As per SI No. 660+661

Painting or varnishing on three coat iron work in small or new wood work with on coat of ledy mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including for proper completion of Wlrk. Paint to be used should confirm to th ISI No. 103 1950. SI No. 641+642

S/F of PVC pipe 110mm dia. 6 kg presser.

S/F of PVC Socket 110mm dia.

S/F of PVC Bend 110mm dia.

Door and Window fitting and accessories and labour charge

White glazed earthen ware Pan 580mm dia(Orisa Pan) jaquar, Essco, Cear, Hindware) PWD Sch. Chapter-22(2)

Wash Hand Basin in 550x400 mm size of white glazed arethen ware (22x16 inche) Jaquar, Essco. Cera, Hindware) PWD sch. Chapter-22(12)

Supply of Toilet fittings

Installation of mini soler sumbersible water Pump 2 hp including cost of all material, labour, T& P etc. complete as per direction E/I.(Details attached)

Labour charge for sainatory fitting

Provision for electrifacation including labour charges

S/F of LED Bulb

Supply of Bucket, (Balti) Mug for toilet and bath room

Supply of 100 mm dia A.C. down pipe

Supply of CP Brass Bib Cook 15mm dia 200 gm

Supply of Brass stop cock 15 mm dia 400 gms PWD SOR

Supply of CPVC pipe 25 mm dia incl all fitting DSR 18.7.3

Supply of CPVC pipe 20 mm dia incl all fitting DSR 18.7.3

Provision of photography

Provision of sign Board/Information stone