Panchayati Raj Department Tender

Mild steel or iron in plan work as in reinforced concrete or reinforce brick work wrought to required shape as necessary cutting ,bending for proper completion of the work and including supply of all steel its wastage bend hooks and authourise overlaping shall be measured required to proper completion of the work SI NO.504

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavment, thickness asper design ,over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade) , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregates not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capicity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythin film wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle ,screed and plate vibrators and finshed in continous operation including provision of contraction and expansion , construction joints, applying debonding strips, primer, sealant , dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.

S/F of signboard and photography