Panchayati Raj Department Tender

Supply and laying of 10 sq. mm. 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bicks on sides and on top . On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer - Incharge complete in all respect . The armouring of the Cable shall be roperly connected with the earth conductor by Clamps etc. (SR No. 20.1.9.

Supply and burring of Safe Earthing Electrode T-39 (Hot - Dip) Galvanized , Length up to 3000 mm, outer pipe 76 mm inner Dia 38 mm terminal Dia 12 mm outer GI pipe of 16 SWG and inner GI Pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs. activated soil (BFC capable of reducing the soil resistivity with good ixture of retaining capacity along with 30 cm square C.I. grame with hinged cover & masonary housing, (From electrode terminal to switch board, cost o 25 x 3 GI strip will be extra.

S/F of plain or pin type aluminium lug to the cable leeds included with tape and making connection etc.

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedesta type for Cat-B and C only.

Supply and Wiring of submains with 4.0 sq. mm. x 3 Core. FRLSH PVC insulated 1 100 V grade single core and copper conductor cable in existing conduit lete with supply of all material labour and T&P ired for proper completion of the work as directed at Engineer in charge. PWD Shedule No- 289(B)

provision fpr photography

Name plate engraved & install