Panchayati Raj Department Tender

Brick work with common burnt clay FPS non modular brick of class designation-150 in foundation and plinth in 1:4

Providing and laying in position specified grade of reinforced cement concrete including the cost of cemterion shuttering finishing and excluding reinforcement including supply pf all materials, labours and T&P etc required for proper completion of work 1:5:3 cemet 1.5 coarse sand :3 graded stone aggregate 20 nominal size) (SOR-279- 5.1.2

Supply, fitting and placing TMT bar reinforcement(FE415)in substructure complete as per dreawing and technical specification clauses 1002,1005,1010 &1202.

Providing, laying, spreading and compacting stone aggregates of specific sizes 53mm to 22.4mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 3 as per Technical Specification Clause 405.

Construction of expansion and construction joint only, Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.M30 (Grade). Coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh cather useing approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), Spreding the concrete with shovels, rakes, compacted contraction and expanion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/ culvert and construction joints, admixtures as aproved, curing of concrete slabs for 14 days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical specification Clause 1501.

Supply and fixing of sign board