Panchayati Raj Department Tender

12 mm thick plaster with1:4 cement & f.sand morter T&P etc.all comp. of work. PWD Sor 2022 Ch 13 ,13.1.1

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25 RCC

Supplying, fitting, and placing M.S bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Construction /Insttalation of ACP Sheet At Gate Pillars,Glow Sign board at Main gate Amrit sarovar details on RCC casted plateform and writing work including all materials and T&P etc .as per

providing and Fixing 12 mm thick frameless touphend glass door shuter of approved quality and manufacture including providing and fixing top and bottum pivot & double action hydraulic floor spring type fixing arrangement and making necesssary holes etc for fixing required door fittings , all completed as per Direction of Engineer Incharge(Door Handle ,Lock and stoper etc to be paid separately.) PWD SOR Year 2022 Chap-21 Sr.No 07 Ref DAR 21.18

Supplying and Fixing Rolling Shuter of approved make made of required size MS laths interlocked together through their entire length and jointed together at the end by end locks ,mounted on specially designed pipe shaft with brackets ,side guides and arrangements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS 4454-part1 and MS top cover of required thickness for rolling shutters. including applying apriming coat of approved steel primer. PWD SOR Year 2022 Chap-10 Sr.No 06 Ref DAR 10.6.1 Size 80x1.25mm MS laths with 1.25mm thick top cover.

Providing and Fixing ball bearing for Rolling Shuter of approved makePWD SOR Year 2022 Chap-10 Sr.No 06 Ref DAR 10.7

Providing and Fixing Gear Box for Rolling Shuter of approved make. As per MR

S/f submersible pump etc all comp.

Electrification Works Rest area and Food Court.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass 693 SUB HEAD : 9 - WOOD & PVC WORK panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing SUB HEAD : 9 - WOOD & PVC WORK 696 hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

P/F Float glass panes PWD SOR2022 ch 9 DAR 9.7.7.2

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5