Panchayati Raj Department Tender

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Brick edging on both side of the road of class M-150 bricks 8cm (3")wide and 12cm (41/2") deep laid with mud mortar including all labour and supply of brick finishing to required templete & ramming the excavated earth as directed by the Engineer-in-Charge.

300 mm dia N.P.-3 Hume Pipe

600 mm dia N.P.-3 Hume Pipe

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen (VG-10) using Bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510

P/F 20mm thick black granite plate of 700*600 mm size including in brick masonary and finished in cement mortar plastering inlcluding all the cost of material labour and T/P etc. Complete work

SCHEDULE - “C” 1-   Bitumen V.G.-10 shall be issued from the central store PD, PWD, Mainpuri at Stock issue rate at the time of issuing the material from the store. 2- Emulsion if available shall be issued from the central store PD, PWD, Mainpuri at Stock issue rate at the time of issuing the material from the store. 3-     There shall be no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason. 4-     The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the penatative rate, i.e., double the issue rate shall be made from the contractor’s bill. 5-     Contractor have to return empty bitumen drums / emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill. 6-     The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2000 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2000 per day shall be made from contractor’s bill for idle period. 7-If contractor procures Bitumen / Emulsion from IOCL, BPCL or HPCL companies, shall have to produce original CRC at the time of claiming payment against each bill for the bonafide requirement.