Panchayati Raj Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Panchayati Raj Department - PRD Tender
Civil And Construction
Eprocure
Opening Date27 Sep 2024
Closing Date9 Oct 2024
Tender Amount₹ 94,33,333
Costs
EMD
₹ 1,88,667Document Cost
₹ 16,697Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRD_936262_8Bid Award Id
ViewTender No
279/NIRMAN/Z.P./2024-25Tender Authority
Panchayati Raj Department ViewPurchaser Address
-Website
http://http://panchayatiraj.up.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Surface dressing of the ground including removing vegitation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m All kind of soil.
264
3696
14
Clearing jungle including uprooting of rank vegitation, grass, brush wood, trees and saplings of girth up to 30cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared.
264
1848
7
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
34.5
29497
855
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment and creating a chemical barrier under and alround the column pitwall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of building expansion joints surrounding of pipes and conduit etc. complete ( plinth area of the building at ground floor only shall be measuredas per I.S. 6313 ( Part ii 1981) aldrine emulsifiable concentrate or any other approved material such as hepthachlor or chlordance will be used the rate of applications of chemical emulsion .
264
50160
190
1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)
53.63
303350
5656
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
120.72
59514
493
Thermo-Mechanically Treated bars of grade Fe-500D or more.
17961.72
1329167
74
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
123.47
1157654
9376
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
68.21
696424
10210
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
132.92
3987
30
Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
28.62
176041
6151
Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level upto floor V level in all shapes and sizes Cement mortar 1:6 (1 Cement : 6 coarse sand)
96.48
675649
7003
Half brick masonry withcommon burnt clay (non modular) bricks of class -150, in super structure above plinth and upto floor V level.Cement mortar 1 : 3 (1 cement : 3 coarse sand)
141.2
122703
869
Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry.
141.2
10872
77
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
4.86
17010
3500
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
22.47
20942
932
Supply and Fixing 5 mm china white glazed tile in flooring or in skirting or dado laid with 1:3 cement slurry jointing and polishing complete including supply of all materials labour and tools etc, required for proper completion of work.
89.25
98175
1100
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
1.73
179812
103938
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood-30 mm thick shutters
24.67
62045
2515
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (35mm thick)
48.09
76366
1588
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick
96.18
50975
530
Providing and fixing wire gauge shutters using galvanized M.S. wiregauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :Second class teak wood-35 mm thick shutters
25.2
40798
1619
Providing and fixing ISI marked Stainless Steel sliding door bolts with nuts and screws etc. complete.250x16mm
62
5580
90
Providing and fixing ISI marked Stainless Steel sliding tower bolts with nuts and screws etc. complete.200x10mm
31
1798
58
Providing and fixing ISI marked Stainless Steel sliding Handle with nuts and screws etc. complete.125mm
62
4030
65
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension
in higher side shall be accepted but no extra payment on this account shall be made Fixed window / ventilator made of (small series) frame 47x50 mm & sash 67 x 110 mm both having wall thickness of 1.9 +- 0.2 mm abd single glazing bead of appropriate dimension
4.2
23620
5624
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area window above 1.75 sqm) ( 3 Track Slider window with wire mesh).
4.32
32309
7479
Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
8.52
9039
1061
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture on both side
4.2
3448
821
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
39.6
22790
575.53
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames
12.6
36044
2860.7
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
752.85
455474
605
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joints with white cement and matching pigments etc., The tile must be cut with zero chipping diamond cutter only, laying of tile will be done with the notch trowel, plier, wedge, clips of required thickness, Levelling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm
131.96
164950
1250
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 600 x 600 mm
44.06
53630
1217.22
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm
18.32
23083
1260
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
14.62
46083
3152.06
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
48.69
77660
1595
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase
134.13
18107
135
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
842.45
153325
182
6 mm cement plaster to ceiling of mix :1:3 (1 Cement : 3 fine sand)
235.78
34423
146
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
586.16
124265
212
New work (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20Kg/ 10 Sqm
586.16
79131
135
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1664.39
224692
135
Finishing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade over including curing and cost of all materials, labour, T&P etc.required for proper completion work for two coat
808.67
56607
70
Two priming coat & Two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work.
269.56
21564
80
Melamine polishing on wood work (one or more coat).
63.76
4881
76.56
Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed
74
15762
213
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
7
39592
5656
Thermo-Mechanically Treated bars TMTC-500-8mm dia.
3300.72
244253
74
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All work upto plinth level
26.07
244474
9376
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) All work from plinth level upto floor V level.
8.8
89888
10210
Brick work with common burnt clay (non modular) bricks of class -150 in Superstructure above plith level upto floor V level in all shape and size Cement mortar 1:6 (1 cement : 6 Coarse sand)
27
189081
7003
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
279
50778
182
Two priming coat & Two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work.
279
22320
80
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
189
22113
117
Painting or vanishing on iron works in small areas or new wood work with two coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I No. 103 1950
6.3
680
108
Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backalite sheet etc.complete in
all respect as directed including matching colour wash.
112
90720
810
Wiring point for two ways light point with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box and two number two ways piano type switches & ceiling rose/angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc., complete in all respect,as
directed, including matching colour wash.
8
7888
986
Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed,
including matching colour wash.
18
16272
904
Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in riggid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & socket etc.complete in all
respect, as directed, including matching colour wash.
48
20256
422
Wiring point for call bell with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire GP box and piano type bell push switch or two pin socket etc.complete in all respect, as directed, including matching colour
wash.
2
1570
785
Supply fixing & concealing of PVC conduit in the wall including cutting of brick laying of conduit & fixing it with MS hooks & then plastering.with cement, sand,mortar finished to the level,with matching colour wash including cost of proper thrading of conduit and providing necessary socket ,bend & chucknuts,as directed by engineer incharge with the supply of material labour and T&P required for proper completion of
work.Size 25 mm dia 16SWG (2 mm)thick
300
21600
72
Wiring point for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable. (drawn through existing concealed steel conduit) and ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion
of the work as directed at site by the Engineer in charge.
29
5452
188
Add for light /fan point with moduler type switch in place of piano type
switch.
130
5720
44
Add for 2 way light point with moduler type switch in place of piano
type switch.
8
1320
165
Add for plug point with moduler type switch in place of piano type
switch.
48
3984
83
Add for call bell point with moduler type switch in place of piano type
switch.
2
160
80
Submains (Cooper Wires) : Supply & wiring of submains with 2 nos.1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in
all respect.
462
85470
185
Supply & wiring of submains with 2 nos.2.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with 1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in
all respect.
368
73600
200
Supply & wiring of submains with 2 nos.4 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all
respect.
180
39780
221
Supply & wiring of submains with 4 nos.10 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all
respect.
10
6370
637
ELCB/RCCB Switches : Supply & fixing and making connection of 40 amp. 4P 30 mA ELCB/ RCCB of Din Rail mounting in complete in all respect as per direction
and satisfaction to the Engineer in Charge.
2
5640
2820
Lighting Fixtures (Lights/Fans) : Supply & fixing of Batton/Angle holder including making connection
etc. as required.
20
1200
60
Supply and fixing of recess/surface/pendent mounting round 6 to 8 W LED Down lighiter having powder coated die cast aluminium housing with heat shink,diffuser/reflector and driver set. Complete in all respect.
CAT. - AAA
50
38500
770
Supply and fixing of recess mounting round 15 to 18 Watt LED Down lighiter having powder coated die cast aluminium housing with heat shink,diffuser/reflector and driver set. Complete in all respect. CAT. -
AAA
4
7480
1870
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both
surface & suspended complete in all respect.CAT. - AAA
15
17850
1190
Supply and fixing of water tight oblong 10 Watt LED bulk head luminaire having die cast housing with driver set confirming to IP 65 and
above Protection.Complete in all respect. CAT. - AAA
1
1400
1400
Supply and fixing of Single LED light Wall Bracket 3 to 6 Watt on
matching M.D.F.E.G. Board base etc.Complete in all respect. CAT. - AAA
16
41600
2600
Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use
as a Decorative Mirror Light)
6
11100
1850
Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down
rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200 mm sweep
10
18000
1800
Supply and fixing of call bell of approved make on polished MDFEG/Teak ply board including making connections etc.complete in all respect.
2
350
175
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
Following size size 10 sq mm x 4 core
80
26160
327
Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer- size 10 sq mm x 4 core
6
522
87
Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of
engineer -incharge. for cable size 10 sq mm
18
360
20
Earthing Work :Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved
in U.P.P.W.D. & C.P.R.I. Certified.
2
23400
11700
Supply and laying of 25mm x 3 mm G.I. strip from earth electrode
directly in the ground as required complete in all respects.
30
2700
90
Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A
48
12480
260
Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A
2
4580
2290
Supply and fixing of surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as
directed at site by Engineer in charge. CAT A
2
10420
5210
Supply & Fixing of MCB blanking plate for DB.
2
50
25
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly
painted, complete in all respects.
10
1400
140
Erection and testing of ceiling fan and regulator for room height above
3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.exra for per 15 cm hight
10
400
40
Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P
etc.required for proper completion of work.
23
14375
625
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for
proper completion of work.
10
1500
150
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the
satisfaction of Engineer in charge of work.
10
5170
517
Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but
excluding modular plate etc. as required.
8
1024
128
Supplying and fixing TV antenna socket outlet modular switch/ socket on the existing modular plate & switch box including connections but
excluding modular plate etc. as required.
8
1024
128
Supplying and fixing Bell push outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding
modular plate etc. as required.
2
242
121
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including
connections, painting etc. as required. (for A.C. Point/MCB Point)
10
6300
630
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated
annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 1 Pair
200
5200
26
Supplying and drawing Co axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as
required.
120
4920
41
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing
surface/recessed Steel/PVC conduit as required. 1 run of cable
60
3000
50
Supplying and fixing modular blanking plate on the existing modular
plate & switch box excluding modular plate as required.
20
700
35
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as
required. 1 or 2 Module (75mmX75mm)
20
5160
258
Supplying and fixing following Modular base & cover plate on existing
modular metal boxes etc. as required. 3 Module
48
6288
131
Supplying and fixing following Modular base & cover plate on existing
modular metal boxes etc. as required. 4 Module
4
548
137
Supplying and fixing following Modular base & cover plate on existing
modular metal boxes etc. as required. 6 Module
23
3611
157
Supplying and fixing following Modular base & cover plate on existing
modular metal boxes etc. as required. 8 Module
10
1820
182
Supplying and fixing following Modular base & cover plate on existing
modular metal boxes etc. as required. 12 Module
8
1880
235
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.,complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)
20
2940
147
Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete
in all respect.
20
6660
333
Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 -
50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated
frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect.
6
15336
2556
Supply & fixing of 375/380mm sweep ventilating (Heavy Duty) exhaust fan complete with Metallic Blade (Dynamically balanced impellers for smooth and vibration-free operation /Pre-lubricated double ball bearing
/Copper motor /Capacitor etc.), Noise level : 50 dB - 55 dB/60 dB - 65 dB
; Power consumption : 90/150 W ; Rated voltage : 220-230 V ; Rated frequency : 50 Hz, Speed : 900/1400 RPM. Complete in all respect.
2
8398
4199
Supply & Fixing of LAN socket outlet modular switch/socket on the existing modular plate & switch box including connections but excluding
modular plate etc. Complete in all respect.
2
1124
562
Supply and fixing of Three phase multifunctional electronic energy meter 10 to 60 Amp. Capacity fitted in intergral box on wall. Complete in all
respect.
2
12226
6113
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single Arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back
filling and Required T&P completee in all respect.
4
59000
14750
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all
respect. CAT AAA
4
35400
8850
Supply and fixing of 240 volts C Curve 6-32 amp SP miniature circuit breaker (10 KA) in existing MCB, DB complete with
connections as required. CAT A
4
1040
260
Supplying & erecting water tight terminal box of cast iron of size
200 x 150 x 150 mm complete on pole.
4
2716
679
supply and fixing following capacity of automatic street light cubicle control pannel with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 seeries with contactors, HRC fuse, isolating switch, metering instrument and instrument
box with CTs etc.complete in all respect.15 A SPN
2
34400
17200
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. (Pole
Earthing common for 4 to 6 Poles at every interval distance)
2
8152
4076
Supply and fixing of two number 8 SWG G.I. wire in 15mm dia.
G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.
64
13440
210
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia
10
4540
454
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 580X440 mm with flush pipe and integrated type foot rests
2
6854
3427
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
4
9604
2401
Providing and fixing 10 litre P.V.C. low level flushing White cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
4
4080
1020
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
8
26128
3266
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia
2
200
100
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
7218
1203
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
2
9308
4654
Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
12
1343
111.98
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.
6
1740
290
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore
6
2580
430
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ( for sink) a) 15 mm nominal bore
2
1294
647
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
12
5880
490
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath) 15 mm diameter
6
31146
5191.02
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 100 mm diameter
6
990
165
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15mm nominal bore
6
3540
590
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
6
4510
751.82
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
6
744
124.09
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
6
2415
402.58
100mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
25
22150
886
75mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
35
30485
871
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.a) 100mm
4
1565
391.48
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.b)75mm
4
1439
359.82
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe.
2
376
188.17
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. a) for b) for 75mm dia pipe.
2
369
184.76
Providing & fixing cast iron coller.a) 100mm dia.
1
338
338.98
Providing & fixing cast iron coller.a) b) 75mm dia.
1.33
307
230.26
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :a) 100mm inlet & 75mm outlet.
15
16831
1122.13
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.a) 100mm
1
506
506.96
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete b) 75mm
1
384
384.62
Providing and fixing plain bend of required degree a) 100mm
2
746
373.03
Providing and fixing plain bend of required degree a) b) 75mm
2
505
252.96
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100mm
4
2481
620.46
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75mm
4
1947
486.77
Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 100x100x100mm
4
2400
600.03
Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 75x75x75mm
4
1692
423.21
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75mm
10
6204
620.46
Providing and fixing single unequal plain invert branch of required degree :100x100x75mm
2
859
429.78
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) a) 100mm
3
1554
518.31
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) b) 75mm
2
769
384.62
Providing and fixing cast iron terminal guard. 100 mm
10
3730
373.03
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 110 mm dia
10
4500
450
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
40
8998
224.95
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm
8
814
101.77
Bend 87.5 degree110 mm Bend
16
1991
124.47
Shoe (Plain) 110 mm Shoe
8
886
110.85
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
325
40.65
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm .
24
4530
188.77
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
8
1663
207.93
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes
30
10140
338
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.25mm dia nominal outer dia pipes
15
5895
393
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.. 20mm dia nominal bore
36
7236
201
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge..25mm dia nominal bore
46
11132
242
Providing and fixing gun metal gate valve with wheel of approved quality.20mm dia nominal bore
4
1820
455
Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia nominal bore
4
2080
520
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Capcity in Per Liters
2000
19000
9.5
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
50
14890
297.81
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.100mm diameter
10
1700
170
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design 100mm dia SW pipe
10
4500
450
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes
50
30734
614.69
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
50
18161
363.22
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
5
11530
2306
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With FPS bricks of class designation 75 (i) For Sewer Line
10
55000
5500
Extra for depth for manholes: Size 600x 850 with With common burnt clay FPS (non modular) bricks of class designation 7.5
2
2800
1400
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
20
6071
303.56
Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (Part I), including collecting samples from different strata, including hire & running charges of all equipments, tools, plants & machineries required for the job all complete as per direction of Engineer-in-Charge, up to 90 metre depth below ground level. As per PWD S.O.R. Ch-28 SL-1
70
32340
462
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 150 mm nominal size dia, confirming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge, As per PWD S.O.R. Ch-28 SL-3
50
29750
595
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen (RMS) pipes of 100 mm nominal size dia with ribs, confirming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge, As per PWD S.O.R. Ch-28 SL-4
20
11240
562
Providing and fixing 100 mm dia size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removal as per requirement, all complete as per PWD S.O.R. CH-28,SL-13
1
164
164
Providing and fixing M.S. clamp of 100 mm dia size to the top of housing/ casing pipe, as per IS: 2800 (Part 1) including necessary bolts & nuts, all complete as per PWD S.O.R. CH-28,SL-14
1
1448
1448
Providing and fixing Ball plug/ Bottom plug of 100 mm dia size to the bottom of housing/ casing pipe, as per IS: 2800 (Part 1) including necessary bolts & nuts, all complete as per PWD S.O.R. CH-28,SL-15
1
197
197
Providing and filling of course sand between bore and pipe. (Rate of Coarse sand as RMR+Ch-4,sl-7 labour rate only)
4.4
7985
1814.9
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, as per Ch-21 S.no.-114 32 mm nominal outer dia
70
9730
139
Supply of PVC Pipes jointing solution (Tube) 100 gm. As per PWD S.O.R. CH-1,SL-57
5
800
160
Providing and fixing of 400 x 600 micron mesh size filter cloth
20
280
14
Providing and fixing of 1.18 x 1.40 mm mesh size filter cloth
20
340
17
Providing and fixing of 5 mm dia Nylon rope
0.5
176
352
Supply and fixing of 1.5 HP crompton submerceble pump Set Single Phase with motor rating of 0.75 Kilowatt i/c all complition of work. (Rate Taken after deduction of G.S.T.@ 18% As sanctioned by S.E.R.E.D. Kanpur Circle )
1
12284
12284
Supply and fixing of 1.5 HP crompton Starter Control Panel for submerceble pump i/c all complition of work. (Rate Taken after deduction of G.S.T.@ 18% As sanctioned by S.E.R.E.D. Kanpur Circle )
1
1779
1779
Supply of cable electrical sor 2018 S.I_291(D)
70
10570
151
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
12.25
1862
152
Extra for every additional lift of 1.5 m or part thereof in excavation
9.97
2033
204
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size)
1.26
8374
6643
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
8.2
52201
6366
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
1.64
11537
7041
Thermo-Mechanically Treated bars of grade Fe-500D or mo
1.29
9546
7400
12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)
34.41
6710
195
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
3642
303.56
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
1140
570
Providing & fixing 75mm dia vent pipes.
1
708
708
Providing & fixing of 75mm dia cast iron terminal guard.
1
264
264.31
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diameter
2
1810
905
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -2.5- Circular shape 450mm internal diameter
2
1796
898
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.With F.P.S. bricks
2
28904
14452.02
Round off Amount
1
1
1.41
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements