Orai Development Authority Tender

Supply,of exterior BIS registered Warm White Linear LED Wall Washer luminaire for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, of Total System wattage not exceeding 12W with system lumen output 952lm with all LEDs on, minimum system lumen efficacy 97 lm/w. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 81 mm ± 5% including surface mount base width 42.8 mm ± 5% , length 500 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF 0.90 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be 80,000 hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc 90°C. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply, of exterior BIS registered LED Warm White flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, of Total System wattage not exceeding 45W with system lumen output 2379 lm with all LEDs on , minimum system lumen efficacy 55 lm/w. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 276 mm±5% including surface mount base width 183 mm±5% , length 320 mm ±5% with constant locking hinges for simple position control from various angles without special tools.Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply and laying wiring of submains of 1.5 sq.mm 3 core PVC insulated 1100 V grade copper conductor cable in pvc conduit with cable as earth wire drawn inside conduit, complete with supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.

Supply & fixing of automatic light control cubicle Panel is suitable for Outdoor application with IP65 protection made up of MS 16 gauge for outdoor type Distribution Panel painted with anticorrosive alkali and acid proof paint for 415V, 1 Phase, 2Wire 50 Hz AC. consisting of Incoming & Outgoing MCB, Contactors, Stabilizer with all conduit wiring & necessary connectors complete in all respect.

S & F Voltage Stabilizer, 170-270V, Power Rating 5 KVA, Working Voltage: 170-270 V. Warranty: 3 Years. Intelligent Time Delay System., High Voltage cut-off Protection complete as per direction of engineer in charge, Built In Thermal Overload Protection.

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.