Northern Railway Tender

... More
The NR has issued a formal invitation for competitive bids for the Northern Railway project, for Provision Of Ibs At 03 Location (dilawar Nagar-rahimabad, Masit-karna, Kaurah- behtagokul) Between Lucknow-behtagokul Section Of Moradabad Division. in Moradabad, Uttar Pradesh, with an estimated contract value of Rs. 4,73,84,349. The bid opening date for this tender is 22-10-2019 and the last date for bid submission is 14-11-2019. Interested bidders for Northern Railway tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Northern Railway - NR Tender

Opening Date22 Oct 2019
Closing Date14 Nov 2019
Tender Amount₹ 4,73,84,349 
Notes
Download

Costs

Summary

Provision Of Ibs At 03 Location (dilawar Nagar-rahimabad, Masit-karna, Kaurah- behtagokul) Between Lucknow-behtagokul Section Of Moradabad Division.

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Installation & wiring of SMPS based Integrated Power Supply System for panel interlocked 27 station as per RDSO spec no. RDSO/SPN/165/2012 (Ver.3) or latest as per guide lines of RDSO. All materials for installation shall be supplied by contractor. Transportation of IPS from Railway store to site shall be done by contractor. Power supply (DG set with fuel) for charging of Batteries shall be arranged by contractor.Charging of batteries, testing & commisiopning as precommissioning check list shall be done by OEM .

3

42096

126288.96

... More
Installation charges of RFID Electronic Marker for S&T underground cable and related equipment. (installation against Item No. 50 & 51 to be done as per instruction of Site Engineer)

500

98

49380

... More
Supply of High availability Single section Digital Axle counter system complete with dual detection as per RDSO specification No. RDSO/SPN/177/2012 (version 3.0) or latest consisting of : i):- Track side High Availability Digital Axle Counter unit DACF-720P=2 Nos. ii):- High Frequency TX Coil & RX Coil(AD-711) 66 (Each Set consisting of web mounting type 2 Nos TX and 2 Nos RX Coil )=02 Sets. iii):-Vital Relay Box Model VR- 722=02 Nos duly wired with the following relays. a):-Vital Relays QN 1K.24 V 6F-6B= 02Nos b):-Reset Relay QN 1K 24 V 6F-6B=1 No. c):-PR Relay QNN1 24 V 6F-2B(Dual)= 1No. iv) Clamp with Deflector Plates and hardware=4 Nos. v):- Reset Box Model No259A=02 Nos vi):- Surge Voltage Protection Device mounted on DIN Rail= 02 Nos Note:- One Set of HASSDAC System will consist 03 Nos. of HASSDAC Complete requiered to control 03 Track section for each line, thereare two line (UP & DN) per block section.

6

2314969

13889818.68

... More
Supply Installation, testing, commissioningf & networking of Remote Terminal Unit with 64 22 digital and 16 analog Inputs as per RDSO Spec. IRS-S-99/2006 with latest amendments complete along with accessories with contractors own wiring & fixing material. The requisite communication Cable/Channel for networing will be arranged by Railway.

3

186815

560445.6

... More
Excavating and refilling of trench 0.3 Mtr wide and 0.8 Mtr deep on pitched/ stone/bricks paved surface, road/crossing/platform etc.and restoring the surface to its original condition.

550

96

53300.5

... More
Supply of ECAT FIBRE OVER ETHERNET OPTICAL MULTIPLEXER with four Fiber ports 80 supporting mode fiber on alternative (Main and hot standby) 100 Mbps Ethernet Port and four ITI G 703 Interfaces and supporting dual power supply from socket unit to be Inter operetable with Integrated Access Multiplexer Detail specification at Annexure-A Make Team E1 Model-Optical or Make E1 Optical, Model-Team or Make ALCATEL, Model -ALC408 Firms Offer Team E1 Optical. as per Annexure-A

24

27612

662688

... More
Supply & fixing of ISI marked Carbon di Oxide type (BC) fire extinguisher of 4.5 Kg capacity 85 confirming to IS: 2878 from seamless cylinder confirming to IS: 7285 with IS marked control value confirming to IS: 3224 high pressure 1 mtr. long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket etc. as required by site Engineer.

9

9377

84398.31

... More
Laying of signalling / telecomm / power cable of different cores as per Drg No(NR/S&T / Con 45 /1.1/ 97C) and as per cable route plan approved by Railway through trenches, RCC pipe, DWC pipe, GI pipe etc. Meggering of cable should be done before and after laying.Cable will be made available at the store of SSE/Sig/P/AMV, contractor has to transport it to work site at his own expenses.

100000

7

715000

... More
Fabrication, supply and fixing of cable termination board of size as per Drg. No. NR /S&T/ CON/ 4.1 /97-A made of angle iron of size 45mmx 45mm x 6mm along with outer frame made of angle iron of size 65mmx 65mm x 8mm duly fitted with Bakelite sheet of size 6mm thick. This also includes fixing of ARA terminals & fuse bases. supply of negative copper bus bar. Supply and fixing of hard wood of size 70cmx 25cmx 4cm in the 16 back for jamming of cables. Scaffolding / cable carrier made of angle iron of size 35mm X35mm X 6mm and flat of size 25mm X 5 mm to be fabricated and supplied as per instructions of site Engineer. Separation between two flats will be 250mm or less as per site requirements. All Materials required for scaffoding/Cable carrier to be spplied by the contractor. All the fixing materials like bolts & nuts, washers, insulator, shoe, angle iron flats, L-bolts, cement sand and concretes etc. will be supplied by the contractor. This includes cleaning, priming by red oxide, painting & description etc. with ISI mark paints.

7

18131

126919.24

... More
Charging of 80AH secondary batteries (with contractors charging equipment) as per standard 29 procedure. All the charging materials i.e. sulphuric acid confirming to IS-266:1993 or latest specifications and distilled water will be supplied by the contractor. This also includes installation of secondary batteries, their inter- connections & writing work as per directions of site Engineer.

18

172

3102.84

... More
Supply & Installation of VF transformer (1120/470) as per IRS Spec. No. TC-22-76 or latest) with suitable fixtures and wiring. Supply of all the fixtures and wiring materials will be done by contractor.

15

3309

49646.1

... More
Concreting unscheduled items in concrete of 1:3:6 ratio in cement, coarse sand and 77 aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. It also includes the excavation of earth as required at site and as per instruction of site incharge. The volume in cubic metres shall include the volume occupied by any CI foundation, trestle,MS angle or flat or GI pipe required to be embedded in the casting. Cement coarse sand and aggregate 25mm are to be supplied by the contractor.

8

2675

21406.16

... More
Supply of Limit Switch New Top Roller type with 2 No +2 NC contacts as per RDSO Balaji Make Model No. 102TPRA.

3

485

1457.19

... More
Supply of external modem suitable for networking of RTUs.

3

17513

52541.79

... More
Casting,concreting and curing of foundation of main signal as per Drg No. NR/S&T/Con / 2.1/97. All material such as Anchor bolts cement, sand, aggregate to be supplied by the contractor.

12

9074

108899.4

... More
Trenchless Trenching/boring (by using HDD or manual pushing method) at congested area, culverts, track crossing and road crossing. depth of trenchless trenching shall not be less than 1500 mm from bottom of Rail flange/Road level for laying of HDPE duct (40/33mm dia).

0.85

-

465476.24

... More
Fabrication, supply & fixing scaffolding /cable carrier made of angle iron size 35mmx35mmx6mm & flat of size 25mmx5mm to be fabricated & supplied as per instructions of site engineer. 17 Seperation between two flats shall be 250mmor less as per site requirement.All materials required scafolding/cable carrier to be supplied by contractor. All the fixing materials ie bolts nuts washers insulators cement concrete etc will be supplied by contractor.This includes cleaning spray priming by red oxide,painting with ISI mark paints by powder coating method.

40

389

15581.6

... More
Supply of 4 conductor Disconnect terminal block for test and measurement 0.08MM2-2.5MM2 Centre marking with test slot for test plug 2MM/0.079IN and 2.3MM/0.091 IN Carrier Rail DIN 35 Front entry cage clamp connection Grey WAGO or similar as per RDSO /SPN/189/2004 Ver.2.0 or latest.

2750

76

211282.5

... More
Supply and installation of optical fibre cable joint enclosure as per TEC spec 34 noRDSO/SPN/TC/68/2014 Rev.1.0 with latest amendment and splicing of optical fiber cables (24 fibers and testing. This includes provision of joint pit (RCC/Prefabricated) as detailed in the technical specifications and as advised by engineer at site.

11

11594

127540.05

... More
Supply, writing and fixing of description boards made of ply 6 mm thick with white sunmica glued over its surface and 1"x1" wooden batton fitted all around on the rear as per instruction of Engineer at site. All the materials to be supplied by contractor.

3

1759

5279.16

... More
Night halt per night or part thereof (Approx. 02 Night per month , 'i.e' 2 x 12 month)

36

88

3202.2

... More
Laying of HDPE duct/DWC Pipe in the trenches, including in HDD/Manual Boring portion and supply pulling of Nylone rope through it at different places as per direction of Engineer/site in charge

26

5992

155801.1

... More
Casting, concreting and curing of foundation and erection of app. Case single as per Drg. No 54 (NR/S&T/ Con/2.7/97). A layer of 3mm of Bitumin compound has to be provided between foundation and location box to prevent ingress of water in the base of location box.All material such as cement, sand, aggregate & anchor bolts shall be supplied by the contractor. Contractor is required to execute all type of repair work of foundation if required during inserting the cable for termination.

60

4930

295828.2

... More
Supply of steel carrier Rail35x7.5 MM,1 MM/0.039 in thick unslotted, yellow with CHROME Wago or similar as per RDSO /SPN/189/2004 Ver.2.0 or latest.

40

133

5358.8

... More
Supply of End and Intermediate Plate 2.5 MM/0.098 in Thick Wago or similar as per RDSO /SPN/189/2004 Ver.2.0 or latest.

325

16

5349.5

... More
Casting, concreting and curing of foundation and erection of app. Case half as per Drg, No 55 (NR/S&T/ Con/2.8/97). A layer of 3mm of Bitumin compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All material such as cement, sand, aggregate & anchor bolts shall be supplied by the contractor.Contractor is required to execute all type of repair work of foundation if required during inserting the cable for termination.

30

4253

127614.6

... More
Earth work for excavation and refilling around location boxes and signals etc. where necessary 76 including 50M lead and 1.5M lift. The lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. The earth work should be well rammed including breaking of clods,levelling and dressing etc. as per instruction of Engr.at site.

8

109

874.4

... More
Extra detention for vehicle 20 Hrs. per month ('i.e.' 20 Hrs. x 24 month)

360

11

4035.6

... More
Supply of chair 16"x16" of Godrej make or similar with PU arms. Height adjustable up to 4" (18" to 22"), seat and back 3" and 2" rubber cushioned. Five legs wheel base with castors superior top of fabric grey.

6

2623

15740.64

... More
Supply of non detoriating type low voltage cartridge fuse rated current 2 Amp round head type as per spec.No.IRS : S- 78/92 with latest amendments.

220

73

16062.2

... More
Supply and Installation of Fiber distribution management system including accessories 83 complete as per RDSO specification No. RDSO/SPN/TC/037-200 (Rev 2) suitable for termination of two no's 24 fiber with pig tail cable as per specification. This includes testing of OFC cable (All items required for execution of work shall be supplied by the contractor.)

9

23896

215064

... More
Supply, Installation, wiring, testing and commissioning of SPT (Half Duplex) at IBS Location and adjacent stations. Each set shall comprise one no. of signal post telephone SPT) master unit (Which shall be 71 installed on IBS post) along with one no. of slove unit to be installed in SM's office suitable for working on 24V DC and suitable for 25KV RE area as per Instruction of site In-charge, ACES make or similar. Note: The contractor shall ensure that there is no interference in communication between the master and slave unit owing to power hump due to RE Induction. Cable from IB signal unit to the cable termination Board in SM's Room/Relay Room will be provided by Railway.

6

18829

112975.2

... More
Fabrication, supply and fixing of relay rack of size 2200mm x 690mm along with scaffolding as per as per Drg. No. NR /S&T/ CON/ 4.3/97-A made of angle iron of size 45mmx 45mm x 6mm along with outer 15 frame made of angle iron of size 65mm x 65mm x 8mm fitted with M.S. Squares bars duly ionized, descriptions strips to accommodate pluging -type relay/groups/points contractor units /ECRs/HMUs. All fixing material like anti- tilting device, hylam sheet (Grade P2) of 6mm thickness if required, bolts & nuts, washers, insulator, shoe, angle iron flats, L-bolts, catenary wires and cement concrete etc will be suppled by contractor. This includes cleaning, priming by red oxide, painting & description etc. with ISI mark paints.

9

13982

125841.15

... More
Extra Km. (over and above,minimum 2500 Km. (average 200 Km per month x 24 month)

3600

7

25956

... More
Supply and fixing of P/G/C /IBS marker with complete fitting as per Drg No NR/S&T/Con/6.2/97. All materials required for the job such as MS sheet, MS angle, nuts and bolts paints and painting material will be supplied by the contractor.

12

537

6449.04

... More
Design fabrication, supply, fixing & wiring of Block indication panel made of 16 SWG powder coated MS sheet of size 39cmx24cmx15cm appx. Consisting of buzzer,counter & different colour LED with holder 3 suitable to work on 24-18 volt dc,supply of push button of standard make approved by site incharge. Indication on the panel & all description on front panel should screen printed.the indication on the front face of the panel will based on site condition which will be advised by site incharge, which has to confirm before carrying out the work of screen painting. All materials to be supplied by contractor.

1

11677

11677.43

... More
Supply and laying of second class bricks in the trench and laying as per Drg. No. (NR/S&T/Con/1.1/97A) and as per instruction of the site Engineer.

256000

6

1658880

... More
Supply of Screw less end stop 10 MM/0.394 IN Wide carrier Rail DIN 35 Grey WAGO or similar as per RDSO /SPN/189/2004 Ver.2.0 or latest.

110

16

1810.6

... More
Supply and installation of earth electrode as per standard practice.The item includes digging of pits in earth 3 Mtrs deep and fixing earth electrode pipe.Casting of cement concrete enclosures.The soil treatment 70 shall be done as per standard practice.The item includes provision of earth lead wires and soldering of lead wires.The other end of the earth wire to be connected to block instrument,cable seath of power equipment,apparatus case,relay racks,other equipment as per the instruction of Engr.at site and IRSEM Complete materials such as earth electrode as per Drg No.NR /S&T /CON/6.3/97 ,cement,wiring materials,soldering materials to be supplied by the Contractor.

30

2694

80835.9

... More
Supply of thermoshrink jointing kit kit as per specification no. IRS:77-2012 Rev-3 Amdt-1 & 2 47 or latest with latest amendments and provision derivation isolation joint in quad cable & PIJF cable at LC Gate, Pump houses, stations cabins etc. using thermoshirnk jointing kit as per specification, Drawings and stipulations of tender documents, this includes all materials required for making joints.

35

6814

238504.35

... More
Supply of Power wire IS2465/1984 & IS 694/1990 (1x16 Sq.mm Red & black colour).

275

130

35926

... More
Supply and Installation for Boring/trenchless Horizontal boring under railway track/ road/culvert etc. for laying 120 mm dia, DWC ( Double Walled Corrugated ) pipes at the depth of 1.4 meter to 2.1 meter from formation level (Level of earth below ballast ) as per drawing and directed by engineer-in-charge by trenchless technology including the cost of DWC pipes. The following required coupling arrangement should aslo be supplied: 1. Suitable snap fit couplers with rubber O ring. 2. Spacers. 3. Tees. 4. Bend, 5.End Cap (1 No.=6 Mtrs. Straight 43 Pipe) (Inspection by RITES) (a). The cost shall include horizontal boring through any intermediate obstruction, either natural or manmade or any boundary etc. (b). The rate is inclusive of all the materials, equipments and labour required for doing trenchless horizontal boring under the railway track, Nothing extra shall be admissible on any account then the rates quoted above. (c). The pipes are to be laid under railway track/ road/culvert. All necessary arrangements are to be provided and all precautions are to be taken, so that bore coming out at other end is not deviated from the horizontal level line by more than 250 mm in horizontal or vertical direction. (d). The rates shall be inclusive of detection and protection of underground utilities encountered during boring. (e). The payment for boring shall be made only when DWC pipes are laid in the bore.

650

1536

998712

... More
1Design of the PI/RRI/IBS system complete including locking table, selection table, circuit diagram,contact analysis chart, relay rack chart etc; preparation of operating & indication panel Domino type diagram, (circuit shall be designed by the contractor with the use of Q series relays.) on the basis of approved 1 signal Interlocking plan and obtaining approval of Competent Authority. The operating & indication panel may have addition & alteration to an extent of 5% variation in No. of Domino.Designing should be as per Railway specifications and as per latest rules prescribed by Rly. Drafting & supply of document shall be as per following details:- (i)Supply of 6 copies of complete set of superior quality paper including one set laminated, properly bound in file with cushioned cover. (ii)Software backup of complete set in the form of CD (2 Nos.) (iii)One complete set of tracings (iv)Design through CAD. (v)Drawings in A-3 size & plan in bigger size papers. (six sets) Per Block

12

3043

36526.32

... More
Provision, preparation & fixing of backlite hylum sheet 450x600x6mm. Furniture class wooden shelf of size 450x450x25mm duly fixed by angle iron piece of different size inside the half app case. Hylum board shall be fixed on angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in loction boxes secured by nuts and bolts. This includes wiring, fixing of fuses, ARA terminal, fixing of Shelf type, 'Q' series relays & other type 57 of relays on squire bars, fixing & jamming of cable with2"salwood plank provided at the bottom. This will includes opening, passing & jamming armour of each cable in the hole drilled separately for each cable through salwood plank & all cable entry points on location boxes, location huts,JBs, relay room/batt room to be closed with suitable masonry works covered with sand and plastering, writing description of terminal, drawing of circuits inside app. case. Painting from outside as well as inside with Red Oxide & Aluminium paint is covered separately. Size of lettering to be 100mm & as per site engineer's instruction.All materials such as teakwood shelf, hylum board, salwood plank,angle iron, square bar, NDT HRCfuse bases, nuts &bolts etc. shall be supplied by the contractor. ARA terminal will be supplied by the Railway.

-

-

85713.64

... More
Supply of domino unit with cover plate as per approved panel diagram each size of54x34mm complete wired up each domino unit should have all the 15 contact terminal wired up.

100

803

80375

... More
Full day charge per month per vehicle upto 2500 Km.

18

668368

668368.26

... More
Blowing/Drawing of OFC/Telecom cable in the HDPE Duct/GI/DWC Pipe by mechanical system.

26

8366

217537.58

... More
Excavating and refilling of trench to the level of ground with rammed earth as per Drg. 30 No(NR/S&T/Con/1.1/97A) so as not to form a drain 0.3 Mtrs wide & 1 mtr deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes.

32000

59

1913280

... More
Supply of 19"17U rack, 600 mm depth, with front & back glass door with lock and key. Make i- Ball or similar [with only front glass door lock and key].

9

19358

174228.12

... More
Supply of single App.Case steel RE with E type lock & Key ward no 42 & handle as per Drg No. RE/S&T/ ALD/SK/ 219/82&221/82 with Alt.B

60

17633

1058028.6

... More
Supply of terminal block M-6 (ARA terminals) as per IRS spec. No.IRS-S-75/2006(Rev.2) & IRS drawing No. SA-23741/A (ALT.4) or latest.

3250

65

213525

... More
Installation & commissioning of OFC equipment for SCADA/Axle Counter per location.

9

18167

163505.52

... More
Supply, Installation & commissioning of Universal Fail Safe Block Interface (as per RDSO Spec. No. IRS-S-104/2012 ver.0 with latest amendments) Suitable to work on OFC/1 Quad Cable as 16 Input -16 Output Multiplexer for IB signalling including 68 Nos of QN1 (8F/8B) Relays for system commissioning.

6

1088693

6532158.6

... More
Fabrication, supply and fixing of cable marker of 1:3:6 concrete as per drg. No. (NR/S&T/CON/1. 5/97A). The marker shall be fixed at various places of cable route as per instructions of Engr. at site.

550

207

113855.5

... More
Fixing, wiring & soldring of 200 way tag blocks as per RDSO spec. No. IRS-S-77/2006(Rev.1) on cable termination rack/ relay rack/block rack/HV rack. All fixing naterial like flats, bolts, nuts, washers etc. will be supplied by the Contractor except 200 way tag block which is covered separately.

12

123

1479

... More
Supply of RFID electronic Marker for S&T underground cables with programmable memory for saving the user specific data inside the RFID Electronic Marker Memory chip later recordable by Electronic Locator which can be burried up to depth of 5 feet.

500

2115

1057535

... More
Supply of Appropriate OFC patch cords (1.5 meters) for connecting FABIO or TANSY or similar with FDMS.

96

2102

201810.24

... More
Supply and laying of RCC pipe /split pipe of 150mm dia ,2 meter long with collars (to specification No. IS-460/1974) in trenches near traction sub stations etc. (Length of half pipe will be counted as combined length of top & bottom) (Inspection by Consignee)

275

451

124129.5

... More
Supply of 200 way tag block conforming to Drg No. SA-24751 or latest & as per IRS- S:77/2006(Rev-1)or lastest

12

1204

14448.48

... More
Supply of Power wire IS2465/1984 & IS 694/ 1990 (1x 25 Sq.mm Red & black colour ).

135

240

32404.05

... More
Supply of App. Case steel RE half with E type lock & Key ward no 42 & handle as per Drg. No.RE/S&T/ALD/SK/220/82&221/82 with Alt.B

30

13525

405760.5

... More
Supply OFC Integrated access device 1U height or 1.5U height/19" rack mountable for LVCD/Digital Axle Counter purpose; Optical module integraed in the unit supporting dual core OFC and one 100 79 Mbps Ethernet port for survillance /smoke detector optical distance supports to be 20 Kms; units to supports one E&M module support Axle Counter /UFSBI/Control Phone/EC/RTU; and one TELNET/SNMP port; unit to support DC/AC power supply: unit to support change over mechanism between quad and optical fiber for E&M Interface option : one number cable to be provided along with unit for E&M: FABIO/2CX/OFC/DC & Module 2W/4W four Port. Make : TEAM ENGG./ FABIO/WAVES or similar /TANSY . as per Annnxure -B

24

194330

4663926.48

... More
Excavation of cable trench (KACHA)of 300 mm wide and 1200mm deep for all types of soil 37 except in rocky soil, back filling after laying of telecom cable /OFC in the GI/HDPE pipesx ramming of the soilin trenches and consolidation of the soil thios also includes clearing of roots and trees and bushes & temporary obstruction on the selected routes.

26000

64

1679340

... More
Supply of HDPE Pipe outer dia 40 mm & inner dia 33 mm as per RDSO/SPN/TEC/45/2013 Rev 2.0 with latest amendment with end cap to be provided along with the drum at both ends

26

46484

1208601.16

... More
Installation, testing & commissioning of complete system i.e. Block equipment universal fail 88 safe block interface multiplexer, wiring in relay room, panel room for double line operation system as per technical specification. This item needs to be carried out by OEM or under supervision of OEM. Pre-commissioning checklist to be done as per RDSO norms by OEM. . Vehicle-

1

66051

66051.17

... More
Supply and provision of 24-32V/5A DC-DC convertor module suitable for make IPS systems and RDSO spec No.RDSO/ SPN/ 165/ 2004 Amd 5 or latest.

35

16866

590315.6

... More
Supply of CLS Signal post 4.6 Metreand ladder 4.5 M with bases and platform confirming to IRS:S-6-81 or latest and RDSO Drg no SA-23153(adv) for ladder.

12

16153

193845.24

... More
Casting concreting,curing of foundation & erection of SLB/BSLB/SB/Goods Warning Board/Stop Dead Board( including supply) as per drg no NR/S&/Con/7.4/97.Supply of SLB/BSLB/SB/Goods Warning Board/Stop Dead Board as per drg no.SA-No2373( with latest amdt) has to be done by the contactor.

6

8211

49269.54

... More
62Fixing of CLS surface base,bolting on the foundation.Erection of CLS post with signal unit on the top or on an offset bracket and fitting ladder and guard to the post at the top Concreting ladder base and embedded into the ground with supporting bracket in the middle.Blanking of the ladder for a distance of 1 feet between the height 6'9"and 7'9" from the rail level by MS angle and MS sheet 6 mm thick wherever required. This 62 includes provision of wooden cross arm 1Mx 1M for CLS unit prior to the commissioning, fixing of AC / DC lit LED Signal unit and hood on CLS unit, wiring the CLS unit and fixing the signal. Elevation and distance of foundation from track shall be in accordance with schedule of dimension for Indian ailway published by Government of India & approved Drawings. All items for the above work except items mentioned in Annx B-2 shall be supplied by the contractor including following items i)U bolt for offset bracket. ii)Wooden cross arm 1Mx1M iii)MS sheet and MS angle for blanking of ladder iv)Wire mesh guard, U-lock for unit , nuts and bolts etc for the following. a)2-aspect colour light signal

12

2282

27391.56

... More
Supply of Signal No. Plates as per Drg.No. RST -11393

12

512

6146.52

... More
Supply, Installation & commissioning of basic earthing kit as per RDSO Specification no. RDSO/SPN/197/2016 Ver.1 and Drg. No. SDO/RDSO/E&B/001 dated:-04.07.2016 and Drg. No. SDO/RDSO/E&B/002 dated:-04.07.2016 earthing kit consisting of earthing electrode of 17mm dia as 3m long- 01 no 02 MEEB (300mm x 25mm x 6mm) -01 No. 3. SEEB (150mm x25mm x 6mm)-01 No. 4. Earth enhancing compound-30 Kg. (minimum). This includes:-Provision of earth connection from MEEB to S&T equipment i.e. 69 Equipment rack etc. with PVC earth wire of size 16/25/35 sq.mm through copper lugs of suitable size. PVC inulated copper wire of 16/25/35 sq.mm will be by contractor. Note: At certain locations it may not be possible to achieve earth resistance of less than 1.0 ohm with one earth electrode/pit due to soil resistivity. In such case provision of loop earth consisting of more than one earth pit shall be done. For interconnection of two earth pits copper tape of size 25X2 sq. mm shall be provided by contractor. The number of pits required shall be decided based upon the resistance achieved for the earth pit already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as separate earth.

50

17067

853394

... More
Additional coupler-Slip fit /push fit type for Item No. 35 above

30

65

1965.3

... More
Supply panel indication LED Red,Green,Clear

325

30

9951.5

... More
Installation, testing, wiring & commissioning of High availability single section digital axle counter complete by OEM or its athourised dealer. The axle counter will be High availability single section type with two detection points and it is possible to install it without trolly protection track circuit. The axle counter must consist of following. The wire and other wiring material will be arranged by contractor at site. a) Mounting of high 68 frequency TX and RX Coil-2 sets, each set consist of web mounting type 2 no. of TX and 2 no of RX. TX & RX shall be supplied by Rlys. b) Mounting of track side digital axle counter unit- 2 Nos. c) Fixing of vital relays etc. duly wired- 2Nos. d) Clamping with deflector plate and hard ware for mounting of two sets of TX & RX coil. e) Resetting arrangement for each axle counter f) All the wiring material required for installation and commissioning shall be arranged by contractor. g)This also includes integration with existing SGE/Tokenless/ token block instruments were required as per instructions of site engineer.

18

58245

1048417.56

... More
Supply of cartridge fuse block made of PBT as per RDSO Drg.No.SA-23748 Alt.4 and Spec. No. IRS S 75/2006 (Rev.2) with latest amendment. Fuse block shall be suitable for round head type voltage fuses.

160

153

24616

... More
Excavating and refilling of trench 0.3 Mtr. wide & 1 Mtr. deep from the foot of rail across the track as per Drg. No NR/S&T/CON/1.2/97. Earth should be rammed so as not to form a drain. This includes removal and refilling of ballast and restoration of surface to original condition under normal traffic conditions.

140

80

11296.6

... More
Supply of Portable Clamp type digital auto range multimeter METRAVI /Phillips / Motwani / 73 Fluke / Rish Max 12 or similar capable to measure from (0.1mv/0.01mA)AC/Dc up to 80A (AC/DC)1000v (AC/DC) and0.1 Ohm-40M Ohm suitable for measurment of frequency (5 Hz- 10 M Hz) and capccitance (40 nf- 100 micro F)

2

5293

10586.9

... More
Supply of Block instrument as per RDSO/SPN/188/2004/Ver-4 with latest amendment for Double Line operation. Each set consisting of the following items. Universal fail safe block interface (RDSO/SPN/ 87 147/2005 with amendment) -2 No. SM Block Panel for Double line - 2Nos as per specification/Drg. No. RDSO/S/32017) Relay Rack with locking & sealing arrangements wiring diagram complete with all relays & plug board = 02Nos (as per RDSO/S/32018) Supply of Relays &Timers as required for complete system duly. Inspected by RDSO Note:-1 Wiring material (16 strand 0.02mm flexible wire etc) and any other signalling materials for installation & commissioning of system shall be supplied by contractor. Note:- 2 It should consist of block telephone as per RDSO/SPN/191/ 2006 & VF transmitter or any other item/ card/ connectors as per latest guide lines required for proper functioning of the equipment.

1

958602

958602.76

... More
Circuit alterations at adjacent stns/cabins at either side of IBS for commissioning of IBS, Resistence, condeser, soldering material etc to be arranged by the contractor.

6

5744

34467.36

... More
Supply of Double walled corrugated HDPE pipes (outer dia 120mm, inner dia 103.5mm as per RDSO Spec. No. RDSO/ SPN/ 204/ 2011 Ver:1.1 or latest Note:- One coupler for jointing shall be supplied with each 6m st. length

410

365

149994.4

... More
Fixing/ laying of DWC pipes for laying of cables (including under-neath the track, Road crossing or other platform cutting etc.) as per drg. No. RITES/ SIG/ GEN/ 028-98, RITES/SIG/GEN/031-98 (as applicable).

410

59

24513.9

... More
Cleaning, scrapping, painting & lettering of all newly installed & existing gears such as signls, point equipment, track circuit equipment with TC No. on rail, app. cases, JB, TLJB, point rodding, cranks, compensators etc. including gate equipment if existing in station section/ Intermediate Block Hut and Block section 72 as per the provision of IRSEM All paints (ISI marked: as per IS Spec.No. IS:15489:2004) make similar to Nerolac/Asian/Berger, shall be approved by Railway Engr.and painting materials to be supplied by the contractor. This includes writing, and painting requirement of all indoor and outdoor gears along with marking of all circuit Nos. near terminal and terminal boards/rack in app.cases, Jn.boxes, relay room, SMs room, writing of relay nomenclature, fuse Nos. and equipment nomenclature as per the approved plans and as per provision of IRSEM. (a)Small stn

3

18907

56721.78

... More
Supply & fixing of GI Pipe 75mm dia 3mm thick perforated at a distance of 20cm or less of required length at culverts / bridges/along the cuttings, suitably concreted at both ends as per drg no. (NR/S&T/Con/1.4/97). GI clamps of MS flats bolts & nuts to be supplied by the contractor

300

700

210057

... More
Provision, preparation & fixing of backlite hylum sheet 910x600x6mm. Funiture class wooden shelf of size 900x450x25mm duly fixed by angle iron piece of different size inside the single app case. Hylum board shall be fixed on angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in loction boxes secured by nuts and bolts. This includes wiring, fixing of fuses, ARA terminal, fixing of Shelf type, 'Q' series relays & other type of relays on squire bars, fixing & jamming of cable with 2" salwood plank provided at the bottom. This will includes opening, passing & jamming armour of each cable in the hole drilled separately for each cable through salwood plank & all cable entry points on location boxes, location huts,JBs, relay room/batt room to be 56 closed with suitable masonary works covered with sand and plastering, writing description of terminal, drawing of circuits inside app. case. Painting from outside as well as inside with Red Oxide & Aluminium paint is covered separately. This will includes opening, passing & jamming armour of each cable in the hole drilled separately for each cable through salwood plank & all cable entry points on location boxes, location huts,JBs, relay room/batt room to be closed with suitable masonary works covered with sand and plastering, writing description of terminal, drawing of circuits inside app. case. Painting from outside as well as inside with Red Oxide & Aluminium paint is covered separately. Size of lettering to be 100mm & as per site engineer's instruction.All materials such as teakwood shelf, hylum board, salwood plank,angle iron, square bar, NDT HRC fuse bases, nuts &bolts etc. shall be supplied by the contractor. ARA terminal will be supplied by the Railway.

-

-

268786.05



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.