North Eastern Railway Tender

Supply of PVC insulated multi stranded copper conductor single core HRFR cable 2.5 sq.mm 04 confirming to IS: 694 (Latest version) and drawing in laid (recessed /surface) PVC Conduit pipe for wiring of point wiring/ circuit wiring /submain/main as required as per technical specification including connections, testing and commissioning complete in all respect.

Supply of PVC insulated multi stranded copper conductor single core HRFR cable 4.0 sq.mm 05 confirming to IS: 694 (Latest version) and drawing in laid (recessed/surface) PVC Conduit pipe for wiring of point wiring/ circuit wiring /submain/main as required as per technical specification including connections, testing and commissioning complete in all respect.

Supply of PVC insulated multi stranded copper conductor single core HRFR cable 6.0 sq.mm confirming to IS: 694 (Latest version) and drawing in laid(recessed/surface) PVC Conduit pipe for wiring of point wiring/ circuit wiring /submain/main as required as per technical specification including connections, testing and commissioning complete in all respect.

Supply, Installation, testing & commissioning of Testing modular switch 10 Amps (1- way) complete in all respect as per direction of Engineer in charge.

Supply, Installation, testing & commissioning of modular type plug socket outlet 2/3 pin 10 Ampere complete in all respect as per Direction of Engineer in charge.

Supply, Installation, testing & commissioning of modular type switch 20 Amps (1- way) complete in all respect as per direction of Engineer in charge.

Supply, Installation, testing & commissioning of modular type plug socket outlet 5/3 pin 20 Ampere complete in all respect as per direction of Engineer in-charge.

Supply and Installation of Ceiling rose 3 plate as per IS:371/1999 (Latest version) including connections, testing and commissioning as per technical specification as per direction of Engineer in- charge.

Supply and Erection of white finished mounting single mounting cover plate with base frame 3 module suitable for mounting of modular type piano switches/plug socket, fan regulator and connecting to wiring complete in all respect.

Supply and Erection of Modular metal boxes concealed boards suitable for mounting of 3 module white finish single mounting cover plate with frame and modular type piano switches/plug socket, fan regulators. Metal board boxes are to be concealed in wall complete in all respect.

Supply and Erection of white finished mounting single mounting cover plate with base frame 8 modules suitable for mounting of modular type piano switches/plug socket, fan regulator and connecting to wiring complete in all respect.

Supply and Erection of Modular metal boxes concealed boards suitable for mounting of 8 module white finish single mounting cover plate with frame and modular type piano switches/plug socket, fan regulators. Metal board boxes are to be concealed in wall complete in all respect.

Supply and Erection of white finished mounting single mounting cover plate with base frame 12 modules suitable for mounting of modular type piano switches/plug socket, fan regulator and connecting to wiring complete in all respect.

Supply and Erection of Modular metal boxes concealed boards suitable for mounting of 12 module white finish single mounting cover plate with frame and modular type piano switches/plug socket, fan regulators. Metal board boxes are to be concealed in wall complete in all respect.

Supply, making testing & commissioning of pipe earthing arrangement with GI pipe 'B' class, 40 18 mm dia 4.50 mtrs, long including accessories & providing masonry enclosure with cover plate of 16 SWG M.S. having locking arrangement watering pipe , salt , charcoal etc. as per Drg. NO. DRM / Elect/IZN /16-89 to achieve earth resistance less than 10 ohms and connecting the equipment with 6 SWG G.I. wire as per site requirement. Earthing shall be done on the basis of code of practice for earthing as per IS: 3043/1987.

Supply, Installation, Testing & commissioning of SPN MCB Distribution board 8 way double door 19 made with 1.2 mm thickness CRCA sheet fully powder coated of 50-70 micron with supply & fixing of 01 No. MCB 02 Pole 40 Amperes 10 KA 230 V as incoming and with supply & fixing of 02 Nos MCB of 6-25 Amp single pole 10 KA, 230 volts as outgoing Complete in all respect including connection as required.

Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable 20 with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Digging of trench conforming to IS 1255).

Laying of XLPE (LT) cable of different sizes in excavated cable trench and in underground pipes. (Laying of cable conforming to IS: 1255).

Fixing connecting testing and commissioning of LED street light fitting 90 watt and LED Flood light 22 on existing pole/ covered shed including with supply connecting testing of 1.5 sq.mm copper wire complete in all respect as per direction of engineer in charge at site. Note: -LED streetlight fitting and LED flood light fitting will be supplied by railway at site.

Supply, erection and testing of hot dip galvanized tapered octagonal pole of 5.0 Mtrs. long top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimension (L x B x T) 200 mm x 200 mm x 12 mm & foundation bolts size (No. x dia x length) (4 x M16 x 600 mm), PCD 200 mm, anchor plate thickness 3 mm with hot dip galvanized detachable single arm bracket made by 48.3 mm outer dia pipe 300 mm long with 32 mm 23 outer dia sleeve including erection & fixing on the foundation. (Octagonal pole shall confirm to IS: 2629 or latest.) Note:-1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. 2. Octagonal pole shall have flush door arrangement and suitable size & length of cable connecting plate for incoming and outgoing cables as per standard. Note: -Octagonal pole shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor.

Supply, erection and testing of hot dip galvanized tapered octagonal pole of 5.0 Mtrs. long top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimension (L x B x T) 200 mm x 200 mm x 12 mm & foundation bolts size (No. x dia x length) (4 x M16 x 600 mm), PCD 200 mm, anchor plate thickness 3 mm with hot dip galvanized detachable double arm bracket made by 48.3 mm outer dia pipe 300 mm long with 32 mm 24 outer dia sleeve including erection & fixing on the foundation. (Octagonal pole shall confirm to IS: 2629 or latest.) Note:-1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. 2. Octagonal pole shall have flush door arrangement and suitable size & length of cable connecting plate for incoming and outgoing cables as per standard. Note:-Octagonal pole shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor.

Making trench of size 300 mm x 300 mm x 1000 mm and Casting/grouting of pre-cast foundation CC 1:2:4 block size 300 mm x 300 mm x 1000 mm grouting with 20 mm size stone aggregate with cement & 25 coarse sand including supply, fixing and removing all firm work and finishing exposed surface including grouting and holding down-M 16x 450 mm- 4 Nos bolts in cement block as per requirement of pole base plate of size 200x200x12 mm and supply & fixing Double Walled Corrugated (DWC DPDE Duct Pipe, size 90/76 mm, confirming to IS:14930 (Part-II) 0.75 meter length in the centre of cement concrete block for cable entry and fixing properly with all labour, material, cement etc. complete in all respect as per direction of engineer in-charge at site.

Supply, installation, Testing and Commissioning 16-meter long high mast lighting system complete with the following works:-1.1 Supply of 16-meter high mast system:- The mast shaft shall be in two sections hot dip galvanized inside and outside in single dip, suitable for wind velocity as per IS:875 part 3. There shall be only one longitudinal seam weld per section and no circumferential weld. It shall also include accessories for high mast including head frame, 2 point suspension system with stainless steel wire rope tralling cable, connector, 6 mm dia double drum winch, galvanized lantern carriage arrangement suitable for 08 luminaries LED type symmetrically arranged. The mast shall have an integral power tool motor, manual handle, junction box at the base compartment for its operation. 1.2 Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & common template (Set 01) 1.3 Supply, fixing, testing and commissioning of LED flood light fixture 250 watt, power factor not less than 0.95 and LED driver should be constant voltage & current and fitting should be IP 66-08 Nos.LED fitting shall conform to BIS specification No. 10322 (Pt.5/sec. 1)/2012 or latest. 1.4 Supply of LED type single dome aviation obstruction light. 1.5 Design & making of outdoor stand mounted feeder pillar control panel with 63 Amps TPN MCB incomer, single dial time switch, 45 Amps TP contractor for the 27 automatic switching of luminaries, power tool control with 02 no. 9 Amps contractors and raise lower push button, incoming 35 mm & outgoing 16 & 2.5 mm2 terminals. (set 01) 2. Erection Part:-2.1 Design construction & erection of suitable shallow foundation with M20 concrete for the high mast considering the safe soil bearing capacity at site as 10 T/ sq.mtr at 2 mtr depth with all material & labour (Job-01) 2.2 Erection of the high mast with the help of suitable equipment and wiring of luminaries with all wiring material like PVC insulated, PVC sheathed flexible cable of suitable copper conductor, cable lugs, MCB etc and all labours. 2.3 Provision of G.I. pipe earthing arrangement for high mast with 4.5 M long 40 mm dia G.I. pipe including connection to high mast earth terminal with 25 x 3 mm G.I. earth strip with all materials and labour as per Drg. No. DRM/Elec./IZN/16-89 (Nos 02) 2.4 Installation, testing and commissioning of control panel on suitable foundation including all material & labour (Job 01).Note:-1. High mast system should be as per enclosed specification. Note:- Complete High Mast system with LED flood light shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor. (Successful Tenderer shall submit WARRANTEE GUARANTEE (WG) @ 10% of the Contract Value of this item in the prescribed proforma before claiming the payment for this item.) Note: - Complete High Mast and LED flood light fixture 250 Watt shall be guaranteed/warranted for a period of 60 months from the date of commissioning for satisfactory performance.

Making of hexagonal platform foundation with Rail post and including all accessories for high mast 28 lighting tower in in yard and goods siding as per CEE's Drg No. L/CEE/GKP/2010/2 as enclosed with all materials. Note:-1. Only rail pole will be supplied by the railway.2. Cutting of rail post 1750 mm length (each) is included in the scope of work.

Supply of LED Pit Light luminaire of 16 Watt (as per CAMTECH specification) complete with Power Factor >0.9, input Voltage 48 V AC +10%, Frequency Range 50 Hz, LED matrix 12 LED matrix, Approximate light output 1300-1400 lumens, LED Driver- High brightness driver system, Source- PWM constant current, Reverse polarity protection, Short circuit protection, Open circuit protection, Material and insulation of driver - Fire 29 retardant material (ABS & Polycarbonate), Diffuser- P12 prismatic polycarbonate & toughened glass, Tj (Junction temperature) - Less than 90 degree centigrade of each LED after continuous operation of 12 hours, The whole luminaire fixture shall be provided with high impact resistance i.e. IK10, The whole luminaire fixture shall ensure tightness level of IP67 and all accessories of luminaire shall be prewired upto the terminal block and the connecting lead shall be 3 core (phase, neutral & earth), PVC insulated of suitable size and minimum 1.0 metre long, Luminaire shall be locking & mounting arrangement. The approximate dimension of luminaire shall be 290 mm long, 210 mm width and 72 mm deep. Note:-LED fitting shall have replacement guarantee for satisfactory performance & manufacturing defects for a period of 60 months from the date of commissioning. (Successful Tenderer shall submit WARRANTEE GUARANTEE (WG) @ 10% of the Contract Value of this item in the prescribed Performa before claiming the payment for this item.) Note: - Complete LED Pit Light luminaire 16 watts shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor.

Supply of LED Catwalk Light luminaire of 22 Watt (as per CAMTECH specification) complete with Power Factor > 0.9, input Voltage 48 V AC +10%, Frequency Range 50 Hz, LED matrix 15 LED matrix, approximate light output 1600-1700 lumens, LED Driver- High brightness driver system, Source- PWM constant current, Reverse polarity protection, Short circuit protection, Open circuit protection, Material and Insulation of driver - Fire retardant material (ABS & Polycarbonate), Diffuser- P12 prismatic polycarbonate & toughened glass, Tj Junction temperature) - Less than 90 degree Centigrade of each LED after continuous operation of 12 hours, The whole luminaire fixture shall be provided with high impact resistance I.e. IK10, The whole luminaire fixture 30 shall ensure tightness level of IP67 and all accessories of luminaire shall be prewired upto the terminal block and the connecting lead wire shall be 3core (phase, neutral & earth), PVC insulated of suitable size and minimum 1.0 metre long. Luminaire shall be provided with suitable mounting arrangement and shall be suitable for semi flush/fully flush/surface mounting and locking arrangement- The top cover of the luminaire shall be fitted with allen screws to avoid theft. The approximate dimension of luminaire shall be 320 mm long, 210 mm width and 72 mm deep. Note: - LED fitting shall have replacement guarantee for satisfactory performance & manufacturing defects for a period of 60 months from the date of commissioning. (Successful Tenderer shall submit WARRANTEE GUARANTEE (WG) @ 10% of the Contract Value of this item in the prescribed Performa before claiming the payment for this item.) Note:-Complete LED catwalk Light luminaire 22 watt shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor.

Fixing, connecting, testing and commissioning of LED Pit Light luminaire 16 watt and catwalk light luminaire of 22 Watt on the washing pit column with the help of G.I. Strip clamps & bolt fastener and making anti- theft arrangement of LED washing pit light including with all material as per direction of engineer in-charge at site.

Fixing, testing and commissioning of Cable junction box of size 205 x 255 x 112 mm on the 32 wall/structure as per the direction of site supervisor. All material (bracket, clamp, bolt fastener etc. and other accessories) required for fixing shall be done by the contractor. Note: Cable junction box of size 205 x 255 x 112 mm will be supplied by the Railway at site.

Fixing, testing and commissioning of Cable junction box of size 104x104x70 mm on the 33 wall/structure as per the direction of site supervisor. All material (bracket, clamp, bolt fastener etc. and other accessories) required for fixing shall be done by the contractor. Note: Cable junction box of size 104x104x70 mm will be supplied by the Railway at site.

Supply, Installation, testing & commissioning of train lighting battery charger 300 Amps, output 110 34 Volts to 150 volts DC, Input voltage 415 Volts, 3 phase, 50 Hz, AC supply complete with outgoing MCB/MCCB of suitable capacity, incoming voltmeter 0-500 volts, outgoing voltmeter 0-400 volts with selector switch, outgoing Ampere meter of suitable capacity with CT and LED indicating lamps for incoming supply complete in all respect.

Design, supply, installation, connecting, testing and commissioning of step down 3 KVA transformer wall/pole mounting type, input voltage single phase 220 volts ± 10%, 50 Hz, AC supply and output 35 voltage 48 volts ± 10%, AC supply with volt meter, ampere meter, indication lamp, high & low voltage and short circuit protection including made by CRCA sheet 1.6 mm thick with hinged cover locking arrangement and making hole in the bottom for cable entry with cable glands and supply & fixing of cable connector terminals etc as required as per site required.

Laying, threading & fixing of MS/GI pipe 25/50/ 80/100 mm dia including socket, fixing on CC flooring by suitable size of G.I clamps with bolts, fastener etc as required.

Supply of M.S. pipe 50 mm dia A class confirming to IS: 1239 (Part-1) (2004) for laying of cable through it as required complete in all respect. Make: -Jindal, TATA, swastik.

Supply, Fixing of distribution box in foundation, connecting testing and commissioning of LT distribution box made of 1.6 mm thick cold rolled steel sheet of size 600 mm (L) x 450 mm (W) x300 mm (D) with provision of water proof , hinged door, suitable locking arrangements, proper hole in the bottom for cable entry (incoming & out going cables) -05 Nos suitable and MS channel of size 75mm x 40mmx 4mm should be fixed across the panel for grouting on the foundation, earthing terminals and panel shall be powder coated (paint) 38 greenish grey shade with TPN Copper Busbar of 600 Amps with provision of water proofing and installation on Providing and making foundation to double door feeder pillar box (cubical type L.T. panel) in CC 1:2:4 with stare aggregate. [Size 1220 mm high x 800 mm length and 600 mm width (610 mm under the earth & 610 mm above the earth) with fine finish to exposed surface, two coats white washing including excavation of foundation, making proper size hole for incoming and outgoing cables. Grouting of holding down bolt in CC (size of bolt 150 mm long 16mm dia.) includes fixing of sub distribution box on CC foundation and as per direction of engineer in charge at site.

Supply, erection and testing of hot dip galvanized tapered octagonal pole of 5.0 Mtrs. long top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimension (L x B x T) 200 mm x 200 mm x 12 mm & foundation bolts size (No. x dia x length) (4 x M16 x 600 mm), PCD 200 mm, anchor plate thickness 3 mm with hot dip galvanized detachable double arm bracket made by 48.3 mm outer dia pipe 300 mm long with 32 mm 01 outer dia sleeve including erection & fixing on the foundation. (Octagonal pole shall confirm to IS: 2629 or latest.) Note:-1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. 2. Octagonal pole shall have flush door arrangement and suitable size & length of cable connecting plate for incoming and outgoing cables as per standard. Note: -Octagonal pole shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor.

Making trench of size 300 mm x 300 mm x 1000 mm and Casting/grouting of pre-cast foundation CC 1:2:4 block size 300 mm x 300 mm x 1000 mm grouting with 20 mm size stone aggregate with cement & 02 coarse sand including supply, fixing and removing all firm work and finishing exposed surface including grouting and holding down-M 16x 450 mm- 4 Nos bolts in cement block as per requirement of pole base plate of size 200x200x12 mm and supply & fixing Double Walled Corrugated (DWC DPDE Duct Pipe, size 90/76 mm, confirming to IS:14930 (Part-II) 0.75 meter length in the centre of cement concrete block for cable entry and fixing properly with all labour, material, cement etc. complete in all respect as per direction of engineer in-charge at site.

Fixing connecting testing and commissioning of LED street light fitting 90 watt and LED Flood light 03 on existing pole/ covered shed including with supply connecting testing of 1.5 sqmm copper wire complete in all respect as per direction of engineer incharge at site. Note:-LED street light fitting and LED flood light fitting will be supplied by railway at site.

Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable 04 with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Digging of trench conforming to IS 1255).

Laying of XLPE (LT) cable of different sizes in excavated cable trench and in underground pipes. (Laying of cable conforming to IS: 1255).

Supply, Installation, Testing & commissioning of SPN MCB Distribution board 4 way double door 06 made with 1.2 mm thickness CRCA sheet fully powder Coated of 50-70 micron with supply & fixing of 01 No MCB 02 pole 40 Amperes 10 KA 230 V as incoming and with supply & fixing of 02 Nos MCB of 6-25 Amp single pole 10 KA, 230 volts as outgoing complete in all respect including connection as required.

Supply, making testing & commissioning of pipe earthing arrangement with GI pipe 'B' class, 40 mm dia 4.50 mtrs, long including accessories & providing masonry enclosure with cover plate of 16 SWG M.S. having locking arrangement watering pipe , salt , charcoal etc. as per Drg. NO. DRM / Elect/IZN /16-89 to achieve earth resistance less than 10 ohms and connecting the equipment with 6 SWG G.I. wire as per site requirement. Earthing shall be done on the basis of code of practice for earthing as per IS: 3043/1987.

All work pertaining to Horizontal Directional Drilling (HDD)/Boring and trench less cabling. It includes supply, transportation and insertion of self-lubricated HDPE pipe and laying of cable in boring under the 08 track/road by using different sizes of pipes depending on total number of cables will be crossed. The depth of horizontal boring should be 3 mtrs from rail flange/road level. This item will be used for track crossing of running lines.) By using self-lubricated HDPE pipe of 108.60 mm inner dia and 125 mm outer dia (PN-6) as per IS:4984 or latest in the bore and the laying of cables in the track/road.

Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable 01 with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Digging of trench conforming to IS 1255).

Laying of XLPE (LT) cable of different sizes in excavated cable trench and in underground pipes. (Laying of cable conforming to IS: 1255).

Supply, Installation, Testing & commissioning of SPN MCB Distribution board 4-way double door 03 made with 1.2 mm thickness CRCA sheet fully powder Coated of 50-70 micron with supply & fixing of 01 No. MCB 02 pole 40 Amperes 10 KA 230 V as incoming and with supply & fixing of 02 Nos MCB of 6-25 Amp single pole 10 KA, 230 volts as outgoing Complete in all respect including connection as required.

Supply, making testing & commissioning of chemical earthing arrangement with proper length earthing electrode to achieve earth resistance less than 2.5 ohms and connecting the equipment complete as per site requirement. Earthing shall be done on the basis of code of practice for earthing as per IS: 3043/1987.

All work pertaining to Horizontal Directional Drilling (HDD)/Boring and trench less cabling. It includes supply, transportation and insertion of self-lubricated HDPE pipe and laying of cable in boring under the 05 track/road by using different sizes of pipes depending on total number of cables will be crossed. The depth of horizontal boring should be 3 mtrs from rail flange/road level. This item will be used for track crossing of running lines.) By using self-lubricated HDPE pipe of 108.60 mm inner dia and 125 mm outer dia (PN-6) as per IS:4984 or latest in the bore and the laying of cables in the track/road.

Supply, Fixing of distribution box in foundation, connecting testing and commissioning of LT distribution box made of 1.6 mm thick cold rolled steel sheet of size 600 mm (L) x 450 mm (W) x300 mm (D) with provision of water proof , hinged door, suitable locking arrangements, proper hole in the bottom for cable entry (incoming & out going cables) -05 Nos suitable and MS channel of size 75mm x 40mmx 4mm should be fixed across the panel for grouting on the foundation, earthing terminals and panel shall be powder coated (paint) 06 greenish grey shade with TPN Copper Busbar of 600 Amps with provision of water proofing and installation on Providing and making foundation to double door feeder pillar box (cubical type L.T. panel) in CC 1:2:4 with stare aggregate. [Size 1220 mm high x 800 mm length and 600 mm width (610 mm under the earth & 610 mm above the earth) with fine finish to exposed surface, two coats white washing including excavation of foundation, making proper size hole for incoming and outgoing cables. Grouting of holding down bolt in CC (size of bolt 150 mm long 16mm dia.) includes fixing of sub distribution box on CC foundation and as per direction of engineer in charge at site.

Supply & erection of MS angle 50 x 50 x 6 mm, 1200 mm long (04 Nos) in cement concrete 1:3:6 08 (1 cement, 3 coarse sand graded stone aggregate 25 mm nominal size) foundation including excavation and refilling etc as required along with painting of M.S. angle by one coat primer & two coats enamel paint 450 mm M.S. angle will be grouted in the ground and welded metal box on M.S. angle as above item no. 15 as per direction of Engineer incharge at site complete in all respect.

Supply of G.I pipe 50 mm dia B class confirming to IS: 1239 (Part-1) (2004) for laying of cable through it as required complete in all respect. Make:-Jindal, TATA, swastik.

Laying, threading & fixing of GI pipe 50/80/100 mm dia including socket, fixing on CC flooring by suitable size of G.I clamps with bolts fastener etc as required.

Supply & fixing of G.I pipe 25 mm dia B class confirming to IS: 1239 (Part-1) (2004) for laying of cable through it as required complete in all respect. Make:-Jindal, TATA, swastik.

Supply & Fixing of GI Tee reducer 50/25 mm dia B class confirming to IS:1239 (Pt-1)/1990 for laying of cable complete in all respect as per direction of engineer in-charge.