North Central Railway Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
North Central Railway - NCR Tender
Telecommunication Services
Ireps
Opening Date31 Jan 2025
Closing Date24 Feb 2025
Tender Amount₹ 30,06,34,021.82
Technical
Technical
Financial
Technical Capacity
... View More
The tenderer must have successfully completed or substantially completed certain similar works within the last 07 years. The required prior work experience includes: - Three similar works each costing not less than 30% of the advertised value of the tender, - Two similar works each costing not less than 40% of the advertised value of the tender, - One similar work each costing not less than 60% of the advertised value of the tender. The similar nature of work involves design, installation, testing, and commissioning of EI or alterations of EI. For substantially completed work, payment equal to or more than 90% of the present contract value must have been made to the contractor. The value of completed work is considered as the completion cost of work, including the final bill amount (gross amount) and Price Variation (PVC) amount, if paid.
Costs
EMD
₹ 16,53,200Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
SIG-WS-CONTRACT-576-CAO-C-HQ-S AND T/NORTH CENTRAL RLYTender No
SIG-WS-CONTRACT-576Tender Authority
North Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Installation, wiring, testing and commissioning of embedded fanless PC based Maintenance terminal/Datalogger terminal as per RDSO spec. No. RDSO/SPN/192/2019 Ver. 2.0 or latest & RDSO TAN No. - STS/E/TAN/3007 version 1 dated:02.11.12 supplied vide item 7 of Sch-A.
3
97149
291449.61
... More
Supply of Micro Processor based Data Logger System with 1024 digital inputs and 32 analog inputs with protocol converter as per RDSO Spec. No. IRS (S) 99/2006 (Amnd. 3) or latest. It includes supply of all the items required for complete indoor relay room wiring from data logger to 6 relay rack tag blocks, drawing/extension of power supply upto Data Logger and also supply of 21" PC with A4 size LASER printer. It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & monitoring of DG sets, ELD, IPS, UFSBI, BI, interlinking and networking of Data logger. Note: Total numbers of relays and other signalling functions/gears required to be wired as per list circulated vide RDSO Letter No. STS/E/Data log ger dtd.12.09.2011 or latest guidelines.
3
521440
1564320
... More
Installation, testing and commissioning of Micro Processor based Data Logger System with 1024 digital inputs and 32 analog inputs with protocol converter as per RDSO Spec. No. IRS (S) 99/2006 (Amnd. 3) or latest. It includes supply of all the items required for complete indoor relay room wiring from data logger to relay rack tag blocks, drawing/extension of power supply upto Data Logger. 7 It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & monitoring of DG sets, ELD, IPS, UFSBI, BI, inter linking and networking of Data logger. It also includes installation of leased line MODEM and other interfacing cards, if required for networking of Data Logger. Note: Total numbers of relays and other signalling functions/gears re quired to be wired as per list circulated vide RDSO Letter No. STS/E/Data logger dtd.12.09.2011 or latest guidelines.
3
98866
296600.01
... More
Supply of Modular Power Supply Arrangement for VDU (42" - 85") and Industrial PC (Embedded PC) with Input and Output Redundancy Arrangement and Hot Pluggable Modules. Consisting of: 1. Input O-Ring Diode Module with Potential Free-1 No contacts (PFC) for two 110VDC 8 Sources from IPS and Single 110VDC bus. 2. Isolated Inverters (Master/Slave) -2 Nos. Input: 110VDC, Output: 120VAC/220VAC 500VA 3. Isolated DC-DC Converters-2 Nos. Input:110VDC, Output:24VDC/10A. 4.3U SS Rack with back Panel Mother Board/ Front Panel Power Connectors Inverter Auto Change Over Switch and all required over Switch and all required protection circuits. SS Rack Dimension:- 1.3U Height for main Rack (132. Smm ± 10%) 2.1U height for Mounting (44.4mm ±10%) Make : Gallant or similar.Inspection by RITES.
6
206500
1239000
... More
Installation and commissioning of Modular Power Supply Arrangement for VDU (42" - 85") and Industrial PC (Embedded PC) including necessary wire & accessories.
6
23600
141600
... More
Provision of Ring Earth for EI system, consisting of 06(six) number of maintenance free earths, which includes supply of all components of earthing & bonding system like earth electrode, earth enhancement materials, earth pit, equi-potential earth bus bar, connecting cables and tape/strips and other associated accessories in accordance with RDSO Spec. No.RDSO/SPN/197 Ver.1.0 or latest and provision of earth pits to be connected in a ring to achieve less than 01(One) ohm earth 10 resistance for connecting EI equipments, relay racks, panel , power equipments as per RDSO TAN no. STS/E/TAN/3006 dated 02.11.2012. Diagram of ring earth should be supplied to Railway for approval before execution. All related materials as recommended by RDSO in Spec . No.RDSO/SPN/197 Ver. 1.0 or latest, will be supplied by the contractor. Note: If due to site condition (high soil resistivity, larger size of EI room etc.) more than six maintenance free earths are required then the rate of payment for each such extra individual earth shall be done as per the rates of SOR items 13002 and 13003 (Earthing Items SOR). No other payment for any other material/accessory/fixture etc. shall be admissible for such extra maintenence free earths.Inspection by RITES.
3
172246
516739.23
... More
Supply of essential spares (for Lusa, Khairahi and Sonbhadra Station.) as per RDSO 11 recommendations for EI system at above mentioned station. Item - wise details of spare to be supplied with unit rates shall be given by the tenderers. For tender evaluation total cost of all spares will be considered and individual rates will not be considered for evaluation. Inspection by RDSO.
3
1525648
4576946.73
... More
Design, Suppy, installation,wiring and commisioning of housing as per systematic arrangement given by work incharge for both the operating consoles AC cabinet with PC ,VDU display, 12 mouse and keyboard with suitable work space and sitting arrangement for operator as per Drg no. TYP/16/0007. Final layout of the VDU table shall be as per the size of the VDU and should be customised as per ASM room's space. Wooden block counter made of teak wood frame and 3 mm thick waterproof plywood with formica finish on top on all four sides, having two compartments inside and two doors on opposite sides.Inspection will be inspected by the Representative of DY.CSTE/C/PRYJ.
3
12271
36815.79
... More
Training of Railway Personnel on EI as per detailed training schedule issued by Engineer incharge.(15Man per day)
5
30957
154786.7
... More
Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board 1 (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn.No.IRS:S-34 S-23 , S-60 or latest, as applicable. The interlocking code for this unit shall be "ABDGH". Inspection by RDSO.
180
4456
802233
... More
Q-Series Track Relay (QTA2 Type), AC immunized, 9 Ohms, 2F/1B along with plug board 2 (base plate), connectors, retaining clips etc and conforming to BRS:939A & 966(Appendix F2) or latest and RDSO Specn.No.IRS:S@ 45"44@ S-23 , S-60 or latest, as applicable.The interlocking code for this unit shall be "FGHKX". Inspection by RDSO.
130
3804
494647.4
... More
"Supply of Key Lock Checking Relay (KLCR) working on 24V DC, AC Immunized, metal to metal, with different ward combinations and contact configuration 4F/4B with 2 extra ward plates, RDSO spec no. RDSO/SPN/219/2016 Ver 1.0 with Amendment-1 or latest. Inspection by Consignee. "
65
8026
521744.6
... More
Supply and installation of prewired KLCR Box, wooden crank handle lock inside box, 4 with 8 way terminal strips, LEDs of approved type, for fixing of EKT on wooden board inside box form installating KLCRs/EKTs up to 06 no., including supply of all material like board, handle, hinges, glass sheet etc. Inspection by consignee.
3
13636
40909.56
... More
Supply and Installation of Glass fronted Key box for Crank handle etc.It should be done as per site supervisor instructions. Inspection by consignee.
3
2459
7377.33
... More
Supply and installation of Cable Termination(CT) rack as per drawing of NC Railway drg.no.SK-727/B dt.02.01.19 complete along with fitting arrangements, wall supports, scaffolding and 6 suitable grouting arrangements and also with arrangement for fixing four 8-way terminal strips/ Screw less terminals/ ARA terminals. The CT rack shall be covered with hylum sheet of minimum 10 mm thickness for fixing of 8-way terminal strips/ Screw less terminals/ ARA terminals. Supply of 8 way terminal strips/ Screw less terminals / ARA terminals not covered under this item. Cable termination rack shall be corrosive resistant and powder coated. Inspection by consignee.
8
48325
386604.08
... More
Supply of Fuse auto changeover system for Railway Signaling System as per 7 RDSO/SPN/209/2012 Rev.2 or latest for Relay room fuses up to 10 Ampere capacity for 12V/24V/60V/110V DC and 110V AC systems. The units shall be mounted on DIN rail in adequate size enclosure as per instructions of Railway site engineer. Two no. of NO+NC contacts shall be provided for remote monitoring. The changeover time shall be less than 1 msec. The audio visual alarm for main and standby fuses shall be provided. One set means set of each fuse. Inspection by RDSO.
850
2248
1910944.5
... More
Installation wiring testing and commissioning of Fuse auto change over system. This 8 includes provision of common Buzzer & indication at ASM Room & ESM Duty Room and painting of fuse details. This also includes fabrication of frame for installation of FACS at Station/ LC gate where installation of relay racks not feasible. One set means set of each fuse.
850
159
135804.5
... More
Supply of PPTC fuse GP 60-185, UL-94 certifi cation (1.6 Amps) for internal/ external current. Make Fuzetec, Tyco, Raychem, Littlefuse or similar Inspection by consignee.
250
10
2535
... More
Supply of PPTC fuse GP 60-400, UL-94 certifi cation (12 V/4 Amp) for TF,TR circuit. Make Fuzetec, Tyco, Raychem, Littlefuse or similar Inspection by Consignee
250
8
2140
... More
Supply of PPTC fuse GP 30-100, UL-94 certifi cation (24 V/ 1.4 Amp) for TPR circuit. Make Fuzetec, Tyco, Raychem, Littlefuse or similar. Inspection by Consignee
250
8
2140
... More
Supply of PPTC fuse GP 250-185, UL-94 certifi cation (24 V/ 4 Amp) 110V AC for Track Chargers. Make Fuzetec, Tyco, Raychem, Littlefuse or similar. Inspection by Consignee
250
8
2140
... More
Installation of integrated power supplyequipment wiring & interconnections ofpower 13 panel, power equipment, programswitches, and busbars fitted on relayracks outgoing supply terminals on CT racks. All the power wires should beterminated with copper lugs (Dowells or similar make) and soldered with the contractor's own materials.
3
38028
114086.7
... More
Supply of Electric Point Machine 143 mm stroke, AC Immunity 160V AC, complete with lock detector and slides for lock detector,Non-trailable,to operate on 110V DC, rotary locking with crank handle universal type as per RDSO Spec. No. IRS:S-24/2002 (Amnd. 1) or latest, RDSO DRG. NO S-10800 (ALT.5) WITH JUNCTION BOX TELESCOPIC. THE MOTOR WILL BE AS PER RDSO SPECN. NO. IRS: S-37/82 (AMND. 3) WITH RDSO DRG. NO. S-10910. This includes supply of Set of tools as per para 20.1 14 & 20.2 of RDSO SPECN. NO. IRS:S-24/2002 (AMND 1) The following set of tools in a suitable tool box shall be supplied along with every set of eight point machines or less. i). Hand operated square drive socket wrenches of 12.5 mm driving square (short type) as per IS: 7381 for M8, M10, M12 & M18 threads. (One 250 mm long 12.5 mm square extension bar as per IS: 7991 alongwith compatible Tee handle Square drive as per IS: 7975 suitable for above socket wrenches shall also be provided.) ii). Open jaw wrenches (spanners) for M10, M12, M20, M24 & M33 threads as per IS: 2028. iii). Adjustable wrench. iv). Screw driver 300 mm long. 20.2 Junction box and two numbers of telescopic pipes of approved type shall be supplied as an integral part of the point machine. Inspection by RDSO.
35
100448
3515688.75
... More
Fixing, wiring, testing and commissioning of Electrical Point Machine (IRS/TWS) on the Wooden/PRC sleepers at points as per standard practice and as per section of rails used. Item includes fixing switch extension bracket, providing insulation for switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle.The item also includes : (i)Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including castle nuts, spring washers (ii) All smithy & fitting works required at site for complete installation. (iii) 15 Installation of gauge tie plate & providing insulation for gauge tie plate (Insulation in William Stretcher Bar will be provided by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on NCR and the instruction of Railway Engineer at site. (v) Supply and fixing of 'S' shape GI bend pipe of 50mm dia and imtr length for cable entry to machine (vi) Supply and filling of industrial grade/good quality lubricant/grease/oil for smooth opertion of point machine Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M-6 / Screw less terminals will be supplied by Railways / covered in Schedule separately
35
14054
491897
... More
Supply of stretcher bar insulation complete set consisting of the following:- Plate-T- 10367-1 No., Bush T10368- 3 Nos. and washer-T- 10371 -6 Nos Inspection by consignee.
35
363
12734.4
... More
Supply of IRS Type point machine 'D'/'P' bracket insulation complete set consisting ofthe following:- Plate LH - S-3266-1 No, RH - S-3265-1 No., Plate S-8804- 1 No., Bush - S- 3199 - 4 Nos, Bush S-8813- 2 Nos. Inspection by consignee.
35
462
16173.85
... More
Fabrication and supply of point rodding (Ground Connection) set for electric point machine (RDSO Type) as per RDSO Drg. No.SA-8800-01, 20-21, 9151-52,9000-01,03-04,9065-66,9101, as applicable. Inspection by consignee.
35
14771
516987.8
... More
Supply and fixing of 'S' shape GI bend pipe 50 mm dia. And 01 mtr length, 'B'class, for cable entry into Point machine with all accessories. Inspection by consignee.
35
3115
109050.55
... More
Installation of DC track circuits (Straight Portion) including supply of materials as per directive of site Engineer. NOTE : (i) This includes drilling 9/32" holes on rails, provision of double continuity GI wire bonding, provision of Block Joints 60 Kg/52 Kg/90R with machined fish plates, installation of Track lead junction box (separately for (+) and (-) rails), provision of track lead jumper wires/cables, fixing of track circuit equipment i.e. track charger, resistance, fuses, batteries, chokes, relays, anti-titling arranginment and painting, lettering and numbering of DC track circuit equipments 20 etc., (ii) [a] Un-machined fish plates shall be supplied by the Railway's, but machining of fish plates shall be done by the Tenderer. In case of provision of Glued Joints by Engineering Department in lieu of RDSO Block joint, the cost of machining of fish plates@ 100/- per straight track circuit and @ 500/- per point zone track circuit will be deducted. [b] This includes insulation of gauge tie plates, Crossing plates, rod in siding points if required or any other place as instructed by Railway Site Engineer, by Tenderer's insulation materials. Railway will supply Track Charger, B-type choke, Resistance, Un- charged battery, TLJB and relays through a separate schedule/from the stores of railway consignee. These are to be transported to site of work at contractor's cost. Tenderer/Contractor shall supply any other materials that are required for the work.
80
7718
617478.4
... More
Installation of DC track circuits (Point zone) including supply of materials as per directive of site Engineer. NOTE : (i) This includes drilling 9/32" holes on rails, provision of double continuity GI wire bonding, provision of Block Joints 60 Kg/52 Kg/90R with machined fish plates, installation of Track lead junction box (separately for (+) and (-) rails), provision of track lead jumper wires/cables, fixing of track circuit equipment i.e. track charger, resistance, fuses, batteries, chokes, relays, anti-titling arranginment and painting, lettering and numbering of DC track circuit equipments 21 etc., (ii) [a] Un-machined fish plates shall be supplied by the Railway's, but machining of fish plates shall be done by the Tenderer. In case of provision of Glued Joints by Engineering Department in lieu of RDSO Block joint, the cost of machining of fish plates@ 100/- per straight track circuit and @ 500/- per point zone track circuit will be deducted. [b] This includes insulation of gauge tie plates, Crossing plates, rod in siding points if required or any other place as instructed by Railway Site Engineer, by Tenderer's insulation materials. Railway will supply Track Charger, B-type choke, Resistance, Un- charged battery, TLJB and relays through a separate schedule/from the stores of railway consignee. These are to be transported to site of work at contractor's cost. Tenderer/Contractor shall supply any other materials that are required for the work.
50
12472
623606.5
... More
Supply of Track Lead Junction Box(TLJB), 4 way, 250 mm x 255 mm x120 mm made from FRP, as per Drg.No. 20101/M(IRS) or latest, including brass bolts and hylam board sheet with terminals etc. The FRP material shall be as per RDSO spec. RDSO/SPN/151/1997 or latest.The technical specifications are as follows: (a) TLJB complete with cover to be in black/red/grey with all the holes 22 required for mounting on FRP stump (vertical two for each FRP angle) HDPE pipe , cable etc. (b) Each TLJB shall have two bakellite terminal block fitted horizontally, each bakellite terminal block shall have two nickel chrome plate with brass terminal. Alongwith each TLJB , nickel chrome plated brass links(two nos.of adequate strength for vertical linking of the terminals to be supplied. (c) HDPE pipe alongwith two nuts for fixing on the TLJB hole . (d) The FRP stump for mounting the TLJB Inspection by RITES
360
5339
1922360.4
... More
Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, 2V, 80 AH, in dry condition, shelf mounting type, conforming to RDSO Specn. No. IRS: S-88/2004 or latest, with inter cell connectors, nuts and bolts, washers, microporous vent plugfloat etc inspection by RDSO.
390
3111
1213582.5
... More
Charging of Lead Acid Batteries, 2V, 80 AH, with contractors own battery grade 24 sulphuric acid and distilled water with minimum two charge - discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per the procedure prescribed by the OEM and extant practice of N.C.Rly and instruction of Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge.
390
247
96435.3
... More
Supply of Track feed Battery Charger as per RDSO Specn. No.IRS: S-89/2013 Ver.1.0 or latest. Charging capacity rating should be suitable for charging 80 AH Battery. Inspection by RDSO.
130
5903
767422.5
... More
Supply of Adjustable Track Feed Resistance 30 Ohms (Disc Type), Phenolic moulded base, as per RDSO Drg. No.SA-20161-66/M or latest. Inspection by RDSO.
130
2280
296506.6
... More
Supply of B Type Choke as per RDSO Specn.No.IRS:S-65/83 (Amnd. 3) or latest. Inspection by RDSO.
260
5911
1537073.2
... More
Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes. Inspection by consignee.
30
355
10672.2
... More
Supply, installation, testing and commissioning of Track Feed battery charger alarm 29 system as per RDSO spec. IRS: S-89/2013 Ver.1.0 or latest, to work on 110 V AC system, having terminals for connecting all 3 supplies and indications for mains and charger failure and drive potential free contacts all with contractor's own material.(per track) Inspection by consignee.
6
3731
22390.56
... More
Supply of Calling ON Signal Unit, non metallic, with Brackets, clamps and fixing 30 accessories, suitable to LED signal lighting unit and as per RDSO spec. RDSO/SPN/194/2006 (Rev. 2.0) or latest. The FRP material shall conform to RDSO/SPN/151/1997 or latest. Calling On Signal Unit shall conform to RDSO Drg no SA-24351(Adv) Alt1 or latest without lamp, lamp holder and lens. Inspection by consignee.
10
11667
116673.7
... More
Supply of Offset brackets for Main Signal, outer diameter 140 mm (5.5 inch), thickness of pipe 4.5 mm with fixing arrangement on Main Signal post as per Drawing No SA-23080/Adv. or latest along with fixing U bolts, nut and clamps. Inspection by consignee.
15
1207
18107.1
... More
Supply of Offset brackets for Shunt Signal, outer diameter 89 mm (3.5 inch), thickness of pipe 4.5 mm with fixing arrangement on Shunt Signal post as per Drawing No SA-23080/Adv. or latest along with fixing U bolts, nuts and clamps. Inspection by consignee
5
1898
9493.7
... More
Supply of hand cuff lock of Godrej/Navtal or reputed make with key and as approved by site engineer. Inspection by consignee.
250
460
115130
... More
Supply of Colour Light Signal Post, Tubular 4.5 m length, 140 mm Dia, as per RDSO 34 spec. No. IRS: S-6/81 or latest and Supply of cast iron Main signal surface base (As per RDSO Drg. No. 2011/M or latest), with CLS ladder assembly suitable for colour light signal 4.5 m long, as per RDSO drg. No. SA 23153 or latest and signal front staging complete assembly and complete signal back staging for CLS unit. Inspection by RITES.
45
25285
1137834
... More
Casting, concreting and curing of foundation for Main Signal Post in the ratio of 1:3:6 as per NCR drg.No. TYP/013/14/SIG Found dt.12.11.14. , using standard size of foundation/galvanized 35 anchor bolts complete, required for erection of colour light signal post. Anchor bolts complete should comply with the RDSO drg. no. SA 116 A/M. Item includes excavation, ramming of CC using vibrator, curing and plastering with 1:4 cement-sand mixture (aggregate will not exceed 3.8 cm). Aggregate, cement, sand and holding down bolts will be supplied by contractor. Any machines & tools, if required for execution of this item, will be arranged/provided by contractor
45
13512
608059.35
... More
Casting, concreting and curing of foundation for Position Light Shunt Signal as per Drg.No.SIG/10/86/C dt.19.2.86 using standard size of foundation/galvanized anchor bolts complete, 36 required for erection of shunt signal post. Anchor bolts complete should comply with the RDSO drg. no. SA 116 A/M. Item includes excavation, ramming of CC using vibrator, curing and plastering with 1:4 cement sand mixture. Aggregate cement, sand and holding down bolts, will be supplied by contractor. Any machines and tools, if required for execution of this item, will be arranged/provided by contractor.
15
3670
55054.95
... More
Erection of CLS Post with base and signal unit on top or on Offset Bracket including erection of auxiliary signals like calling on, shunt signal if any. It includes fixing of all LEDs and wiring 37 of complete signal including route and auxilliary signals, if any. It includes fixing of front and back staging, ladder and guards, signal name plates / boards, with contractor's own brackets and fixing materials. The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. The Item includes cutting of Signal post if required by Site In charge.
45
5881
264663.9
... More
Erection of Position Light Shunt signal with Base, Post, Signal unit, complete fixing of LEDs and wiring of full signal. It includes fixing of Number Plates. The work shall be done as per instructions of Rly engineer at site.
15
951
14272.2
... More
Supply of Position Light Shunt Signal Unit Complete,Metallic, Independent type, along with base and post, hood, Cover etc as per Drg. No. SA-23840 (Adv.) suitable for LED Signal Lighting Unit.(Supply of LED Unit is not covered in this item) Inspection by RITES.
-
-
39
... More
Fixing of Junction type Route Indicator on top of signal post and complete wiring, 1- Way/2-Way/3-Way/4- Way/5-Way/6-Way/theater type.
12
1112
13350.12
... More
Supply, fabrication and fixing of retro-reflective marker/boards/plates as per the following: 'P'marker-Non illuminated as per Drg. no.SA-23456 (Adv) or latest, as applicable and provided by Railways. Inspection by consignee.
10
887
8877.7
... More
Supply, fabrication and fixing of the Calling On board/BSLB board as per RDSO Drg. no. 42 SA 2373 (Adv)/Stop/Warning board as per drg. no SA-2380 (Adv), or as applicable, on concrete foundation and painting with Retro reflective paint. All work to be carried out as per Railway site engineer instructions. Inspection by consignee.
6
8112
48674.88
... More
Supply, fabrication and fixing of Retro-reflective Signal number plates as per NCR drg. 43 No. TYP/14/0014 dtd 28.11.2014 issued vide NCR letter no. S&T/NCR/DRG/TYP dated 28.11.2014 or latest,on signal post with contractor's own material like clamp, U bolts, nuts etc. Inspection by consignee.
45
744
33517.8
... More
Supply of Junction route indicator unit 1 way, made of FRP, (Without Lenses & Holder) 44 as per Drg. No. SA 23401 -06 (Adv.) (as applicable) suitable for LED Signal Lighting Unit and as per RDSO spec. IRS: S-66/84 Amd.-1 or latest and RDSO/SPN/194/2006 Rev.2 or latest, (Supply of LED Unit is not covered in this item).Inspection by Consignee.
2
44476
88952.52
... More
Supply of Junction route indicator unit 2 way, made of FRP, (Without Lenses & Holder) 45 as per Drg. No. SA 23401-06 (Adv.) (as applicable) suitable for LED Signal Lighting Unit and as per RDSO spec. IRS: S-66/84 Amd.-1 or latest and RDSO/SPN/194/2006 Rev.2 or latest.(Supply of LED Unit is not covered in this item) Inspection by RITES.
12
54127
649527
... More
Supply of Junction route indicator unit 3 way, made of FRP, (Without Lenses & Holder) 46 as per Drg. No.SA 23401-06 (Adv.) (as applicable)suitable for LED Signal Lighting Unit and as per RDSO spec. IRS: S-66/84 Amd.-1 or latest and RDSO/SPN/194/2006 Rev.2 or latest.(Supply of LED Unit is not covered in this item). Inspection by Consignee.
2
46778
93557.86
... More
Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway 47 signaling suitable for RE area THREE Aspects, complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23002 A/M (Adv.) and as per RDSO spec. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest.Inspection by RITES.
35
35753
1251377.75
... More
Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway 48 signaling suitable for RE area TWO Aspects, complete without lenses, lamps and signal transformer as per RDSO Drg. No. SA 23003 A/M (Adv.) and as per RDSO spec. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest.
10
31322
313223.5
... More
Supply of Position Light Shunt Signal Unit Complete, Non-Metallic, made of FRP as per Drg. No. SA-23840 (Adv.) suitable for LED Signal Lighting Unit.(Supply of LED Unit is not covered in this item).
5
14796
73984.6
... More
Supply of Non deteriorating type, Round head type, low voltage cartridge fuse as per Spec No IRS: S -78/92 with latest amendments, 2A/4A/6A/10A/16A rating capacity. Inspection by RDSO.
2500
123
308000
... More
Supply of Cartridge Fuse block, made of PBT, as per RDSO spec. No. IRS: S-75/2006 (Rev.2) or latest and as per Drawing. No. SA- 23748 (Alt.-4) or latest Inspection by RDSO.
2500
243
609150
... More
Supply of ARA terminal block, made of PBT, as per RDSO spec. No. IRS: S-75/2006 (Rev.2) or latest and as per Drawing. No. SA- 23741A (Alt.-4) or latest. Inspection by RDSO.
50000
119
5966000
... More
Supply of Apparatus Case/Location Box Full as per RDSO drg. no.RDSO/S-11500 or 53 latest, with 'E' type lock and key ward no. 42, . The key and handle should be supplied at the rate of one no. per four Apparatus cases. The 'E' type key lock is as per RDSO Spec.No. IRS;S-30/64 or latest, RDSO drg. no.SA 3376/M or latest and Key is as per Drg. No. 3377/M or latest. Inspection by RITES.
550
27512
15131787
... More
Supply of Apparatus Case/Location Box Half as per RDSO drg. no.RDSO/S-11507 or 54 latest, with 'E' type lock and key ward no. 42, . The key and handle should be supplied at the rate of one no. per four Apparatus cases. The 'E' type key lock is as per RDSO Spec.No. IRS;S-30/64 or latest, RDSO drg. no.SA 3376/M or latest and Key is as per Drg. No. 3377/M or latest. Inspection by RITES.
70
19913
1393963.2
... More
Excavation, casting, curing of foundation and Installation and Erection of Apparatus case Full (App. Case as per RDSO drg. no.C.RLY SK NO.S&t/CONST/JHS/T-112A RDSO/S-11500 or latest) 55 with contractor's own frame, cement and other material in the ratio 1:3:6. 'E' type lock to be supplied and installed with App. case.This includes filling of location foundations with river bed sand and plastering on top with a mixture of 1:4 of cement and sand. It covers fixing of lamp holder , switch and lamp etc. in Apparatus Case.
550
12277
6752795.5
... More
Excavation, casting, curing of foundation and Installation and Erection of Apparatus case Half (App. Case as per RDSO drg. no.C.RLY SK NO.S&t/CONST/JHS/T-111/A with contractor's own 56 frame, cement and other material in the ratio 1:3:6.'E' type lock to be supplied and installed with App. case.This includes filling of location foundations with river bed sand and plastering on top with a mixture of 1:4 of cement and sand. It covers fixing of lamp holder , switch and lamp etc. in Apparatus Case
40
10332
413288.8
... More
Fixing of ARA(M-6) Terminals /Screw less connectors / modular disconnect terminal 57 blocks and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. The work shall be carried out a per instructions of railway Engineer incharge.(Supply of all above terminals has been covered separately).
1500
18
27165
... More
Supply of Disconnect Terminal block for four conductors with screwing cage/clamp 58 type, sliding switch disconnect, as per RDSO spec. RDSO/SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate lenght of rails for fitting terminal blocks. Inspection by Rites.
15000
192
2892150
... More
Termination of Outdoor Cables (Main Cables /tail cables) at ARA/Disconnect type 59 terminals provided in Apparatus Cases, Cable termination rack in relay room, station building, generator room etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The outdoor cable shall be terminated in Relay Room, DG Room, ASM Room etc under supervision and instructions issued by Engr. incharge of the work.
110000
1624700
1624700
... More
Fabrication and fixing of phenolic laminated sheet of grade P3, minimum 10 mm thick,as per Apparatus case diagram/plan, in location box by providing all fixtures like ARA/Disconnect 60 terminals, fuse blocks, fuses, relays on square bars etc. including fixing of PVC coated string rods at the back side for cable support with contractor's own material like iron angle, nuts, bolts etc. The iron angle for fixing shall be minimum 3 mm thick. This also includes fixing of teak wood shelf minimum 25 mm thick for holding track circuit equipments. The work shall be done as per instructions of Rly engineer at site.(Apparatus case Full)
550
4478
2463164
... More
Fabrication and fixing of phenolic laminated sheet of grade P3, minimum 10 mm thick,as per Apparatus case diagram/plan, in location box by providing all fixtures like ARA/Disconnect 61 terminals, fuse blocks, fuses, relays on square bars etc. including fixing of PVC coated string rods at the back side for cable support with contractor's own material like iron angle, nuts, bolts etc. The iron angle for fixing shall be minimum 3 mm thick. This also includes fixing of teak wood shelf minimum 25 mm thick for holding track circuit equipments. The work shall be done as per instructions of Rly engineer at site. (Apparatus case Half)
40
2429
97171.6
... More
Supply of Phenolic laminated Sheet, resin bonded, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied. Inspection by consignee.
450
5756
2590263
... More
Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 Ver.1.1 and or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer dia,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One coupler with suitable rubber O-ring should be supplied with every 6m of pipe length. (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified. Inspection by Rites.
-
-
63
... More
Horizontal Boring/Manual moling without damage to surface road /track for laying/isertion of DWC/GI/HDPE pipe. The bore shall be done at the depth of minimum 1400 mm from 64 the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. Note:- DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.
15000
1083
16249350
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes etc. as per the site requirement and as per approved cable route plan. This also includes 65 laying of cables in track crossings & road crossings.(Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
640000
6
4377600
... More
Supplying and placing of one layer of quality bricks of standard size and of 'B' grade of the local make and spreading on cables laid.(minimum size of brick 200mm X 100mm X 70mm) Inspection by consignee.
264000
4
1140480
... More
Supply of Medium class GI pipes 100 mm dia (4.5 mm thickness) with thread collars as per IS 1239 (Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm 67 or less with 10 mm dia hole, or at any other locations as decided by Site Engineer. It includes supply of all material required for fixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. Inspection by consignee.
2400
991
2380224
... More
Supply and fixing of RCC cable route marker, made with concrete in the ratio 1:3:6, engraved "NCR" "S&T" on top portion and painted on both sides, along the route at every 50 meter 68 and at route diversion. The cable marker is to be fabricated as per RDSO drawing no. SDO/cable laying/020, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest. The fixing work is to be done as per extant practice of NC Railway and as per Railway site supervisor incharge. Inspection by consignee.
600
429
257436
... More
Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document No. RDSO/SFG/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in nomul (all type) soil/strata, conforming to distances as per cable route plan and refilling and ramming of loose soil. This 69 work includes clearing of route from bushes etc,covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on North Central Railway and instructions of Railway Engineer at site. In case 1.2m depth of trench is not achievable due to site conditions, specific approval of JAG/SG Officer will be required fior each site where trench depth of 1.2m is not possible, only after approval of JAG/SG Officer proportionate payment can be done.
50000
87
4388500
... More
Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and 70 concreting it afterwards as per original condition. In hard rocky ground area , cables will be laid normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench . The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no.SDO/Cable laying/008, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. 71
2000
158
317760
... More
Cross trench for identification of the route of existing signlalling and telecomm cables.
600
290
174252
... More
Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver. 1.0 or latest to achieve a resistance less than 1 ohm. It consist of following: (a) 72 Copper bonded steel electrode of minimum 3.0 m long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection by RITES.
30
17575
527270.7
... More
Installation of Unit Maintenance Free Earth to achieve a resistance less than 1 ohm as supplied under item no. 13002 of Chapter 13 of SOR. It includes (i) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 73 micrones to made requirement of under writer's laboratories (UL) 467- 2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specn.No.RDSO/SPN/ 197 Ver 1.0 or latest. Typical RDSO approved drawings referred in the RDSO specification document are : (i) SDO/RDSO/E&B/001 for typical installation of Earth, (ii) SDO/RDSO/E&B/002 for typical bondong and earthing connections, (iii) SDO/RDSO/E&B/003 for typical arrangement for earth resistance measurements.
30
9429
282898.8
... More
Supply and installation of earth electrode as per standard practice and as per NCR Drawing No. S&T/CONST/6.4/97. It includes supply of GI pipe of 3 meter length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 74 meter deep and fi xing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per drawing No. S&T/CONST/6.3/97. It includes installation of 7 strand GI wires as earth lead wires, supported on MS fl at size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS fl at to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge.Inspection by RITES.
500
3450
1725480
... More
Supply, wiring, installation and commissioning of Earth Leakage Detector (ELD) having 75 6 digit counter, 12 Channel bus bar, voltage of 110V/60V/24V/12V in AC/DC measurement as per RDSO Spec. RDSO/SPN/256/2002 or latest. This includes supply of fuse terminal strip for incoming power supply wires. Installation to be done on 19 inch sub rack along with insulation resistance meter, remote indication and buzzer in ASM room. Inspection by RDSO.
3
175512
526538.58
... More
Cement concrete work for miscellaneous, unscheduled items in ratio 1:3:6 of cement, 76 coarse, sand and aggregate Item includes excavation, ramming of CC by using vibrator, curing and plastering with cement and sand mixture in ratio 1:4 (aggregate will not exceed beyond 3.8 cm). The aggregate cement and sand will be supplied by contractor.
15000
5109
76644300
... More
Supply of CO2 type fire extinguisher capacity 4.5 Kg capacity ISI marked, with all 77 accessories, operating temperature (-30)° to (50)° for class 13 B type of fi re with 1 meter long hose pipe fi tted with PVC bend horn, with carying handle and wall mounting brcket, complete in all respect. It should conform to IS 2878:2004. Extinguisher certifi cate has to be supplied along with the item. Inspection by consignee.
15
5179
77697.15
... More
Lettering and Numbering of all S&T gears like Signals, Loc. Boxes, Pt. Machines, TLJBs, Block joints etc. Each item to be taken as one unit.
2200
85
188276
... More
Supply of Office table, laminated top, size minimum 3 ft x 4 ft, make Godrej/Durian/Methodex/President or of similar reputed make. Inspection by consignee.
15
12583
188758.65
... More
Supply of lateral filing cabinet of size minimum 900 mm x 900 mm (3 ft x 3 ft) to store circuit disgrams, make Godrej/Durian/Methodex/President or of similar reputed make. Inspection by consignee.
15
17772
266580
... More
Supply of Chair model PCH-7001 of Godrej make or of similar reputed make. Inspection by consignee.
15
11174
167618.25
... More
Supply of Steel stool, 1 ft by 1 ft size, 1.5 ft height, laminated top. Inspection by consignee.
20
1267
25345.2
... More
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar.App. Cases inside and outside to be done by Silver colour. (Apparatus Case Full)
550
681
375072.5
... More
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar.App. Cases inside and outside to be done by Silver colour. (Apparatus Case Half)
40
620
24807.2
... More
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Main Signal post, base, unit and complete fittings)
45
914
41150.7
... More
" Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Shunt Signal post, base, unit and complete fittings) "
15
389
5849.25
... More
Painting of two coats of Enamel paint over one coat of Red Oxide primer after 87 scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Point machine and ground connections, Point machine by Black enamel and ground connection by Red oxide)
120
288
34621.2
... More
Supply, Installation, Testing & Commissioning of Micro processor based Networkable type analog Addressable and modular type of Fire Alarm Control Panel (FACP) with display with 2 loop 88 expandable up to 4 loop , power supply and battery back up as per RDSO srecification No. RDSO/SPN/217/2021 ver3.0 or latest , including GSM module-01No. for sending SMA to configured mobile No. nad relay module-02Nos for connecting to data logger for remote monitoring. the panel shoild sopprt sufficient devices of both detectors and modules in a single line circuit.
2
100285
200571.46
... More
Supply, Installation, Testing & Commissioning of Addressable heat & smoke multi sensor. As per RDSO Specification No. RDSO/SPN/217/2021 ver3.0 or latest.
24
3133
75203.76
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable and resettable Manual call polint with inbuilt short circuit hault isolator.(As per RDSO specification No. RDSO/SPN/217/2021 ver3.0 or latest)
2
4303
8607.44
... More
Supply,Installation,Testing & Commissioning of Aspiration system with single pipe slot along with required module and power supply , interfacing module etc. As per RDSO Specification No. RDSO/SPN/217/2021 ver 3.0 or latest.)
2
290878
581756.32
... More
Supply,Installation,Testing & Commissioning of UL/LPCB/VDS listed CPVC Pipe 25 mm Dia& Pipe Accessories for the Aspiration detection.Approval-ULand shall comply to RDSO/SPN/217/2021 Ver 3.0 or latest.
190
1180
224222.8
... More
Supply,Installation,Testing & Commissioning of Hooter cum strobe including its control module (As per RDSO Specification No. RDSO/SPN/217/2021 ver3.0 or latest)
4
7748
30993.36
... More
Supply,Installation,Testing & Commissioning of Fire Survival cable 2X1.5sqmm (unarmored) (Asa per RDSo specification No. RDSO/SPN/217/2021 ver3.0 or Latest)
400
113
45356
... More
Supply, instalation, testing and Commissioning of analog Linear Heat Sensing (LHS) 95 cable/Liner Heat Detection (LHD) tube, (As per RDSO specification No. RDSO/SPN/217/2021 ver3.0 or Latest)
100
1084
108435
... More
Supply, instalation, testing and Commissioning of LHS/LHD interface module for LHS cable/LHD Tube connectivity to control panel as per RDSo specification No. RDSO/SPN/217/2021 ver3.0 or latest.
1
82951
82951.01
... More
Lettering & Numbering of detail and description writing of particulars of terminations & equipments on relay rack, relays, cable termination rack, battery & power equipments, IPS, operating 97 panel, axle counter etc constituting entire system with contractor's own paint and writing material ("Asian" make enamel paints only to be used). This includes supply and fixing of Teflon strips 3mm thick and 25 mm wide for each row of relays and cable terminations. The work shall be done as per extant practice on the division& instruction of Rly engineer at site.
3
10979
32939.67
... More
Provision & running of MUVs to the sites of work as per requirement and direction of 98 Engineer In charge along with Driver for Transportation of less heavy materials & manpower. The rates includes all taxes, license fee, road permit, driver wages, fuel, repair and maintenance cost etc complete in all respects.
80000
31
2530400
... More
Supply, Installation, Testing and Commissioning of High Availability SingleSection digital axle counter (HASSDAC) with Dual sensor system as per RDSO/ SPN/177/2012 (Version 3) or latest. Th is includes the supply of High frequency web mounting type Tx coil/Rx coil, VR/PR Box duly wired, Vital relays, PR Relays, Clamp with defl ector plates & hardware, Dual display reset box/monitoring console with auto resetting facility, Surge voltage protection devices and fi lter card to 99 be mounted on DIN rail etc as per OEM for complete installation & testing & commissioning of (HASSDAC) system. This include fixing of track device, relays, wiring, lacing /dressing, cable termination with lug eyelet, drilling holes in rails, Installation of track devices and make it functional along with existing UFSBI/block instrument. Material required other then supply item of HASSDAC shall be arranged by contactor to make it functional. Note: One set of HASSDAC system will include equipment required to monitor One Up line or One Dn line of a full Block Section between two stations.Inspection by RDSO.
8
732954
5863635.84
... More
Multi section Digital Axle Counter (MSDAC) Supply, design, installation, testing and commissioning of multi section digital axle counter (MSDAC) complete system as per RDSO Specification No.RDSO/SPN/176/2013 version 3 with Latest amendments or latest. Suitable for commissioning of yard/Auto Section / dual detection (DCTC/AFTC with MSDAC) . MSDAC should have facility to reset track sections. Design of axle counter circuit indoor installation testing and commissioning of multi section digital axle counter (per unit), supply of essential 10% spares covering all types of cards, wheel sensors for MSDAC . Supply of Diagnostic system for Remote diagnostics Tool set for wheel sensor mounting and maintenance of MSDAC consisting of torque wrench, ratchet, testing plate , measuring tape , screw driver, gloves and multimeter fluke 115 (1 Nos. per 14 DP). " "NOTE-1 : 1. If any housing is required to keep outdoor equipment, it has to be supplied with the equipment with no extra cost. 2. Maintenance free earthing (supply and installation) for track 100 device/mushroom housing etc to be done by the contractor if required by system design. No extra cost/ payment will be made by this Railway: 3. Automatic resetting facilities through hardware /software for auto resetting to be provided by contractor by his own materials for this no extra cost /payment will be made by Railways. 4. MSDAC system networking to be done with central control room. Required hardware PC/ network equipment to be provided by the contractor, no extra cost/payment will be made for this by Railway. El Channel/media will be provided by Railway for this purpose from nearest Railway station. 5. All other Hardware like TPR, Extra card to make dual DP, Modem, ethernet switches etc if required for commissioning and final track section pick up will be supplied by contractor, no extra payment will be made by this Railway. 6 Separate evaluator for UP and Down line to be provided at Station/RH/IBH as decided by Railway site engineer. For the communication between evaluator to evaluator (RH to Station) Quacl/ OFC Link (dark fiber) will be provided by Railway. Any other Networking equipment if required will be supplied by contractor at no extra cost. 7. Manual resetting through reset box at station to be provided as per requirement.
25
354930
8873265.75
... More
(a) Design, preparation and supply of the following Technical documents: " (i) 101 Installation, Testing, Commissioning and Maintenance manuals (ii) Functioning and System overview manuals (b) Design, preparation and supply of the following the following completion documents: (i) Application Logic circuits (ii) VDU/CCIP/LCP diagram (iii) Interface Circuit/Wiring diagrams consisting of Relay contact analysis chart, Relay disposition chart, Relay contact to contact wire list chart, LCP/VDU/CCIP cable termination chart, Power supply diagram, Electronic signalling equipment and Power supply layout diagram, Relay rack and Cable termination rack layout diagram, Relay rack and Cable termination rack particulars, Fuse, Resistors, Condensors etc. particulars, Details of Analog and digital inputs to be supplied to Data logger, Block wiring diagram (if applicable), Wiring diagrams for SSDAC or HASSDAC or MSDAC or BPAC (if applicable) (iv) Cable Route plan with overlaid Location Boxes placement (As per NCR HQ Drg. No. TYP/14/0017 issued vide letter no. S&T/NCR/DRG/TYP dtd 29.12.2014) (v) Cable Core plan with overlaid Location box placement (vi) Location huts/Goomties wiring diagrams (if applicable) (vii) Location boxes wiring diagrams (viii) Track circuit bonding plan (ix) Earthing particulars plan (x) Signal Interlocking plan (SIP) (xi) Station working rule diagram (SWRD) (xii) Station working rule (SWR) (xiii) Selection table/ Route control chart All the above completion documents should be supplied as follows: (i) Two sets initially for approval and commencement of work (ii) One set in soft copy (in editable AUTOCAD format) in Pen drive. (iii) One set of Original tracings (iv) Six sets of final 'As Made' completion plans/diagrams in proper bounded form
5
177255
886279.8
... More
Supply, Installation and commissioning of active lightning arrestor of Class 'A' for building protection as per standard NFC-17-102 :2011 or latest. It shall work on early streamer 102 emission principle. It shall be made of stainless steel with an operating time of 60 microsecond or less. A non-resettable counter shall be provided to count the number of lightning occurrences. The device shall be installed on top of the building on a GI mast and shall be connected to the earth pit through a copper tape of 25mm x 2mm or better. The copper tape shall not touch the building throughout and shall be connected to the earth electrode by exothermic welding. Inspection by RITES.
5
111652
558261.2
... More
" Supply of 1 x 6 Sq mm (Red) multi strand copper power wire , 85 conductor each dia 103 0.30 +/- 0.01 with insulation thickness of 0.8 mm and nominal conductor resistance of 3.3 ohms/km and test paraMtr.s as per RDSO Specn. No.IRS:S-76/89 (Amnd.3) or latest. Colour of the wire will be specifi ed by the Engineer incharge."Inspection By Consignee
3500
47
167895
... More
" Supply of 1 x 6 Sq mm (Black) multi strand copper power wire , 85 conductor each dia 104 0.30 +/- 0.01 with insulation thickness of 0.8 mm and nominal conductor resistance of 3.3 ohms/km and test paraMtr.s as per RDSO Specn. No.IRS:S-76/89 (Amnd.3) or latest. Colour of the wire will be specifi ed by the Engineer incharge." Inspection By Consignee
3500
47
167895
... More
Supply of 1 x 10 Sqmm (Red) multi strand copper power wire, 101 conductor each dia 105 0.45 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specifi ed by the Engineer incharge.Inspection By Consignee
3000
125
376740
... More
Supply of 1 x 10 Sqmm (Black) multi strand copper power wire, 101 conductor each dia 106 0.45 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specifi ed by the Engineer incharge. Inspection By Consignee
3500
125
439530
... More
Supply of 1 x 16 Sqmm (Red) multi strand copper power wire as per IS: 2465/1984 and 107 IS:694:2010 or latest, 101 conductor each dia 0.45 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89(Amnd.3) or latest. Colour of the wire which is required will be specifi ed by the Engineer incharge.Inspection By Consignee
2500
147
369425
... More
Supply of 1 x 16 Sqmm (Black) multi strand copper power wire as per IS: 2465/1984 108 and IS:694:2010 or latest, 101 conductor each dia 0.45 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specifi ed by the Engineer incharge.Inspection By Consignee
2500
147
369425
... More
Installation, testing and commissioning of electrically operated lifting barrier, complete 110 with casting of cement concrete foundation for pedestal and boom rest post, cabling, power supply connection, earthing of barriers & wiring with complete outdoor work as per approved drawing, wiring etc.
2
55688
111377.24
... More
Supply, Installation,testing and commissioning of Sliding type mechanical Boom barrier (SBB) assembly, 11 to 12 Meter Long, movement drive mechanism, resetting & supporting stand 111 suitable for Mechanical/Electrical level crossing gate as an emergency arrangements as per GZB Workshop drawing no. SA-SWG/GZB/E/01. The sliding boom assembly should be have the provision of 50mmx50mmx50mm angles for the entire length. Boom rest posts should be 10 no per gate or more as per site requirement. Painting should be completely done of all the assemblies/parts of Sliding LC gate.Inspection By Consignee
2
189475
378951.92
... More
Supply, installation, testing and commissioning of LED type control cum indication panel complete with pre wired Tag- Blocks, Wires MS angles etc. for LC gate , depicting the yard layout Signal, Point, Track circuit, Operating / emergency Push Button, counter with sealing arrangements, 112 house in a Steel metal cabinet. Th is shall be consist 15 x 10 exchangeable Domino. Unit as per Spec. SPN/186/2004 Rev. 2.0 or latest. Th e indoor wiring inside panel shall be terminated on tag block as per instructions of Engineer-in-charge. Th e wiring on panel tag blocks shall be repeated on tag blocks located in relay room. Th is includes laying & termination of cable, if any from Panel Room to Relay Room in HDPE pipe.Inspection By Consignee
2
65778
131557.92
... More
Supply of Antistatic mats of size 1 meter x 0.75 meter and 3 mm thickness. Inspection By Consignee 114
36
2009
72359.28
... More
Installation of Antistatic mats of size 1 mtr x 0.75 mtr and 3 mm thickness.
36
148
5331.6
... More
Supply, Installation, Transportation, Testing, Execution and Commissioning of Block Proving by Axle Counter [BPAC] using Block panel and UFSBI for Double line Operation as per Spec No. IRS: S-105/2012 [ver.0] with latest amdt. Each set consisting of following: (i) Universal Fail safe Block interface complete with all accessories as per Spec No. IRS:S-104/2012 [ver.0] with latest version and amdt. Qty-02nos. (ii) Block panel complete with all accessories as per RDSO Drg No. RDSO/S/32017 for double line (latest amdt.)- Qty-02nos. (iii) Relay rack with due locking and sealing arrangement as per RDSO Drg No. RDSO/S/32018 including all relays and wiring as wiring diagram as per RDSO drg No. RDSO/S/32018 with latest amdt. and supply of all type of Relays (iv) Block Telephone with accessories as per RDSO Spec No. RDSO/SPN/191/2006, Qty-2nos. with all type lighting protection and inbuilt 115 automatic media change over with voice, E1 and dark fiber port. OR (B) Supply, Installation, Transportation, Testing, Execution and Commissioning of microprocessor based Station Master Block Panel for Double line Block instrument with Block telephones as per RDSO/SPN/175/2005 with automatic media change over material and description: (1) Supply of (a) Microprocessor based Station Master Block Panel for Double line instrument with Block telephone as per RDSO/SPN/175/2005- version 1 or latest (b) Block Telephone as per RDSO Spec No. RDSO/SPN/191/2005 or latest (inspection by RDSO)- Qty-2nos. (2) Supply of Microprocessor based SSBPAC (d) Block instrument for double line as per RDSO/SPN/175/2005 version 1 or latest (inspection by RDSO) Qty-2nos (3) Supply of lighting and surge protection devices or power line 24 V DC, Class-C (inspection by Consignee) qty-02Nos (4) Supply of lighting and surge protection devices for Data lines Class D (inspection by Consignee) Qty. 2Nos. (5) Supply of all type of relays Qty. 02 lot with inbuilt automatic media changeover with voice, E1 and Dark fiber Port.(Inspection by RDSO)
4
1139938
4559753.24
... More
Dismantling and Releasing of existing Electrically operated LC gate/Mechanically operated LC gate and other associated S&T fi ttings. All the released material will be transported to the SSE/Consignee depot.
3
8782
26348.1
... More
Dismantling and Releasing of existing Location boxes/Apparatus cases/Jn boxes and other associated S&T fittings. All the released material will be transported to the SSE/Consignee depot.
450
972
437436
... More
Dismantling and Releasing of existing Points (both electrical and Mechanical) and other associated S&T fi ttings. All the released material will be transported to the SSE/Consignee depot.
120
1529
183564
... More
Dismantling and Releasing of existing Signals (both electrical and Mechanical) and other associated S&T fi ttings like wheel, pulleys, wires, stakes etc. All the released material will be transported to the SSE/Consignee depot.
150
1529
229455
... More
"Dismantling and releasing of S&T gears in ASM room, Battery room, Relay room, 120 Equipment room, Power room. This include all equipments and relays, relay rack, terminal board, SM slide frame, panel batteries, battery chargers, angle iron, IPS etc. All material to be transported and stacked in the store of SSE/SIG/C/PRYJ.(Unit as Per Room as Number)"
60
9538
572300.4
... More
Loading, Transportation/Carriage and Unloading of various S&T material by a 9 MT truck, from/to the consignee depot /DY.CMM ,JHS to /from various locations, as decided by the Railways.
12000
54
655800
... More
Supply of Electric Point MachineIRS type High Trust of 220mmThrow AC Immunity 160 122 AC Non-Traibale to oprerate on 110DCcomplete with Lock and Detectorslides and clamp and groundconnection to IRS: S-24/2002 withAmendment 1 or latest and AsslyDrg. No. RDSO/S- 11000 and forMotor IRS; S-37/82 with tools.Inspection by RDSO.
35
115287
4035060.75
... More
Supply, installation, testing &Commissioning of Automatic Changeoverdevice for DAC/MSDAC V.21/V.23tooptical fibre STM (E1), Standard 19" RackMountable device consisting of two E1port supporting 120 Ohms interface dualoptical ports with (1+1) hot stand by(Dual core path and single core path) 20Kms driving distance and four V.21/V.23(E&M) Interface (04 ports) (04 E&M + 04Quad) 2W/4W Interfaces with autoChange over Mechanism to Quad Ports2W/4W each port 123 configurableas 2W or4W No restriction in configuration unit to support potential free contacts fournumbers can be linked with datalogger/RTUfor E1 status, Quad status & power supply status, unit support frontpanel ressetable audiable buzzer in caseof main link fails (opticalor E1): unit to support power off fail safe mechanismwhen the unit switched off the inputs isbyepassed to the Quad cable automatically unit supports front panelindicators for Quad health status: E1Dual,optical dual path, dual DC power supply18V DC to 72 VDC range make: teamEngg/Cygnus/Latana/Waves /Fabio1CX-4P or Similar reputed make.Inspection By Consignee)
6
49294
295767.54
... More
Supply of gauge tie plate insulation complete set each set consisting plate T-10372 = 1No., Bush T-10368=3 Nos. and washer - T-10371 = 6 Nos. Inspection by consignee.
35
364
12749.45
... More
Wiring of relay and other equipments if any in location boxes/gate lodge etc as per approved wiring diagram. This includes all wiring materails and hardware including all types of wires. Relay and equipments will be supplied by the railways.
120
461
55369.2
... More
Cable insertion in old locations/Station Relayroom/Cable pit etc as persite engineer and filling withsand and plastering thesame. Note; All the sundrymaterials except that to besupplied by railways will besupplied by the contractor.
40
2558
102340
... More
Supply and installation of modem for UFSBI for use with secondary media OFC/Quad/VF Channel etc.The modem shall be complete with existing system as per RDSO spec No.IRS:S- 105/2012(Ver.0) with latest amendment.Inspection by Consignee
6
67518
405111.72
... More
Excavation of pit in and around the existing location boxes very carefully without damaging the working cables and shifting and turning the location boxes to clear of the infringement as instructed by the Railway representative at site. The work includes ensuring the safety of the 128 signalling system, releasing the cable coils to give access for shifting/turning the location boxes, Necessary masonry work and earth work in and around the location boxes to the required level shall be done as instructed by the Railway representative at site. If the existing earth connections to the location boxes are disturbed, the earth wires shall be properly re-connected.(All materials required for the work shall be supplied bythe contractor.]Shifting ofAppratus cases(Full)
40
5371
214852.8
... More
Supply of managed STM-1, SDH (STM-1 Add/Drop MUX and upgradeable to STM-4) fully wired for 2 X 63 MB and equipped for 21 E1s and minimum 4 port of 10/100 base T electrical interface (with LCAS and GFP), including power supply, order wire, Ethernet card, sub rack, inbuilt DDF, installation material and all other accessories and other common cards, manuals etc. as per TEC GR 1 No. TEC/GR/TX/SDH - 004/04.Jan 2011 or with latest amendment. It shall be equipped with redundant power supply card. The contractor will supply all other accessories as mentioned in the above said TEC Specifications and system will have provision of different redundancy cards as per the TEC Specifications.Each node shall support mapping of management function to E1 signal. The equipment shall be compatible to the existing SDH system (if any) and NMS system (if any) in the section.This includes connecting all pig tails, optical patch cords etc. to the SDH equipment. Note: It shall be possible to increase capacity from 21E1 to 63 E1s by adding / inserting tributary cards. This includes connecting all pig tails, optical patch cords etc. to the SDH equipment. This also includes connecting the SDH equipment with all cards to the 48V Bus including supply of wires and connectors. Termination of all E1s on DDF taking PVC cable over runway or a wall.Inspection by RDSO.
1
243504
243504.58
... More
Supply of OFC patch cord/jumper cable, 10 m long, with (1) FC/PC connectors on both sides or (2) One end FC/PC connector and other end compatible to work with STM-1.Inspection by consignee.
40
1784
71367.2
... More
Supply of 2 Mb Programmable Primary Digital drop insert multiplexer (PD MUX) as per RDSO Specs. IRS TC- 68/2012 Rev.0 (Amnd.1) or latest with conference facility and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. 3 It shall support NMS installed at Test Room and may operate local/remote location of entire section. It also includes supply of all miscellaneous items which will be required for final testing and commissioning of system. The above MUX should be equipped with following cards : - (i) 2 wire/ 4 wire E&M VF circuit Card - minimum 04 no (ii) Subscriber loop circuit Card - minimum 02 no (iii) Exchange loop interface circuit Card - minimum 01 no (iv) Data Acquisition Card - minimum 01 no (v) GDT(G.703) Card - minimum 01 no (vi) Loop protection Card - minimum 1 no Note :- Make to be confirmed before supply of this item as per site requirement.Inspection by consignee.
1
198381
198381.92
... More
Supply of Remote service terminal (portable) fully compatible with NMS software. 4 Service terminal shall be workable from any location of the network. It should be possible to read the fault status of the STM, MUX,cross connect etc. in the network from the service trerminal. Make and model to be approved by railways before supply. Inspection by consignee.
1
136166
136166.71
... More
Supply of Subscribe loop interface cards, minimum 04 circuits per card.Inspection by consignee.
10
19110
191102.2
... More
Supply of 2W/4W E&M interface cards, minimum 04 circuits per card. Inspection by consignee.
10
21194
211949.7
... More
Supply of Exchange loop interface card, minimum 04 circuits per card. Inspection by consignee.
4
32802
131211.44
... More
Supply of 19" 42U composite rack, covered with front transparent doors. The rack shall be complete with all fittings for housing 2 SDH(STM-1/4/16) equipments, 2 PDMUX along with PDP, 8 DDF, Krone MDF for 100/200 pairs, cooling fans and other accessories like cable and connectors, runway ladders, locking arrangement, completely wired and equipped with anti surge protection through fast acting fuses and GD tubes for all channels, of reputed make President/Rittal or similar. Inspection by consignee.
1
37681
37681.28
... More
Supply of SMPS based, FR-FC-BC Battery Charger, for Telecom use, 48 volts, 25 Amps, 9 single phase, in N+2 configuration modules of 25 Amps, automatic switching between the modules, as per RDSO Spec No. RDSO/SPN/TC/23/99 (Ver- 4) (Amndt. 1) or latest along with two potential free contacts. Inspection by consignee.
1
88335
88335.45
... More
Supply of Ultra Isolation transformer 230V AC/230V AC, 1.5 KVA, with MOVR protection on either side to provide cross protection Inspection by consignee.
3
17671
53015.31
... More
Supply of VRLA Battery set, 12V/100AH, as per RDSO spec. No. S-93/96(A) with Amndt.- 1 or latest, with suitable racks. Inspection by consignee.
3
10671
32013.39
... More
Supply of Battery charger/Power supply unit, 230V AC/12V DC, 10 Amps, as per RDSO spec. IRS: S-93/96 9B) Amndt.-1 or latest for VRLA battery.Inspection by consignee.
-
-
12
... More
Supply of 48 Volt/200 AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S-93/96(A) (Amd.1 ) or latest, with intercell connectors consisting of 24 cells of 2V each.
3
88553
265660.68
... More
Supply of Multi telephone way side station equipment with necessary mounting arrangement on standard 19"rack. It should be 48V operated a sper RDSO drasft spec. No. RDSO/SPN/TC/66/2007 with amendments 1 and 2 or latest. Inspection by consignee.
5
69443
347219.65
... More
Supply of push button telephone suitable for connecting with way side equipment & the system as per specification no. GR/TEL/04SEPT2004 or latest amendment from DOT/TEC approved firm. Inspection by Consignee.
10
643
6430.8
... More
Supply of Universal 2 wire/4 wire way station DTMF control Telephone, as per RDSO spec. no. IRS: TC:82:-2005, (with Amd. 3 or latest. Inspection by consignee.
10
5199
51996.4
... More
Supply of cable termination rack panel fitted with 12 no. of 32 way U link feed panel along with complete U links and mounting arrangement for isolation transformer. Suitable size copper strip to be provided for earthing on the rack.Inspection by consignee.
4
12759
51037.44
... More
Supply of VF Transformers, rack mounting type, 1120:470 Ohms as per RDSO Speen.No. IRS: TC-22/76 or latest.Inspection by consignee.
30
1276
38283.6
... More
Supply,installation of 19"12U rack with transparent glass door with accessories like fans & tray etc.Inspection by Consignee.
5
10739
53698.35
... More
Supply and installation of solid state Amplifier model no.TZA-2000,TZA-4000EM Ahuja make or similar along with 1 small stand. Inspection by Consignee. 21
3
18742
56228.22
... More
Supply of Microphone 59 XLR of Ahuja Make or similar. Inspection by Consignee.
3
2193
6581.31
... More
Supply of 30 watts Industrial Horn speaker with 5,10,15,20,25 watt tappings, matching transformer and driver unit, make reputed as LBD 8347, 8308 of Philips make, UHC-30XT of Ahuja make or similar. Inspection by consignee.
8
2068
16545.04
... More
Supply of 2 Mbps Router, 2 LAN/4 WAN port, 230V AC operated, as per RDSO spec. RDSO/SPN/TC/84/2008 Rev. 0 or latest, along with connecting cables, connectors etc. for connecting to the ethernet devices, of reputed make like Cisco/Dlink or better. Inspection by consignee.
3
83565
250697.04
... More
Supply of 2.048 Mbps, Managed SHDSL modems, as per RDSO spec. no. RDSO/SPN/TC/80/2020, Rev.2.0 or latest with suitable connector. A pair consists of V.35 and G.703 interfaces.Inspection by consignee.
4
32937
131750.2
... More
Supply of 2 Mbps Line termination unit/LAN extender 48V DC/230 V AC operated, as per RDSO spec. no. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest, along with suitable connectors to extend line data over copper cable of 05mm/0.63mm/0.9mm dia. or CAT 5/6 cables. Inspection by consignee. 26
2
24154
48309.36
... More
Supply of Switch board cable: 5 pair x 0.5 mm. Inspection by Consignee. 27
1000
27
27900
... More
Supply of Switch board cable: 10 pair x 0.5 mm. Inspection by Consignee. 28
1000
52
52980
... More
Supply of Switch board cable: 20 pair x 0.5 mm. Inspection by Consignee.
1000
98
98680
... More
Supply, installation, testing an commissioning of 2 core screened/shielded multistrand PVC insulated wire (24/0.2 mm dia) for speaker load line. Inspection by Consignee.
1500
48
72975
... More
Supply of UTP CAT-6 cable of reputed make Siemen/ Systemax / D-Link/ Tyco/ Krone/ AMP or similar. Inspection by consignee.
900
22
20124
... More
Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or superior. Inspection by consignee.
250
77
19467.5
... More
Supply and Installation of PVC channel , with cover, of size 50 mmx 34 mm of 1 mm thichness. The installation to be done as per instructions of site InCharge. Inspection by consignee.
150
132
19857
... More
Supply and Installation of PVC channel , with cover, of size 75 mmx 50 mm of 1.2 mm thichness. The installation to be done as per instructions of site InCharge. Inspection by consignee.
150
204
30610.5
... More
Supply and fixing of PVC conduit pipe 25 mm with accessories such as bend, tee, coupling, elbow, saddle, clamp, screw, PVC/ wooden plugs etc. on walls, angle or on rail of platform 34 shelter etc. MS clamp made of 3 mm MS flat to be manufactured and supplied and fixed to clamp the PVC pipe or angle/ rail run of platform shelter. The clamp should be painted with red oxide primer over which two coats of aluminium paint to be given. Where ever necessary jumper holes to be made in wall and above PVC pipe threaded and wall to be repaired to its original condition.Inspection by Consignee.
1000
26
26910
... More
Supply of paramite battery wire 07 strand each strand of 0.75 mm dia in Red colour Inspection by Consignee.
50
26
1321.5
... More
Supply of paramite battery wire 07 strand each strand of 0.75 mm dia in Blue colour.Inspection by Consignee.
50
27
1350
... More
Supply of 24 fiber optical fiber cable straight joint enclosure (SJC) complete with all 37 accessories along with enclosures with heat shrinkable splice protection sleeve as per RDSO spec. RDSO/SPN/TC68/2014 Revision 1.0, Amndt. 1.0 or latest. Splice losses in no case should be more than 0.1 db. Inspection by consignee.
15
5506
82600.65
... More
Supply of thermo shrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012 (Rev.3.0) with (Amdt.-1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer Inspection by consignee.
15
3361
50428.8
... More
Supply of 6-pin emergency socket flat type as per specs no. IRS:TC: 42/87 with Amdt-1 to 3. Inspection by Consignee.
20
447
8941.4
... More
Supply of 25 Watt VHF synthesised transreceiver set, synthesised in frequency band 40 136 MHz to 174 MHz (full band), with DTMF microphone and cords, with GP antenna, 30 m of feeder cable and suitable BNC connectors, with 3m of power cord and 12V/13.5V 10Amp/15Amp power supply suitable for 25W VHF set, as per RDSO spec. RDSO/SPN/TC/107/2018, Rev. 0.0 Amndt 1 or latest. Inspection by consignee.
3
23056
69169.59
... More
Supply and Fixing of 50 pair Krone termination DP duiy fitted with disconnection type. Inspection by consignee.
20
6225
124517.2
... More
Supply and installation of 20 pair CT box with disconnection facility, made of FRP. Inspection by consignee.
40
2212
88496.4
... More
Supply of permanently lubricated HDPE duct, 40 mm outer dia, as per RDSO spec. No. RDSO/SPN/TC/45/2013 Rev.2 Amndt.2 or latest, along with all accessories like end caps, collars, bends, couplers etc.
40
76811
3072456.8
... More
Installation, wiring, testing & commissioning of managed SDH (STM-1 Add/Drop MUX and upgradeable to STM-4) equipments, with all accessories and power supply connections,fixing of ladder etc. in OFC/Relay room.
3
33553
100661.61
... More
Installation, programming, wiring and commisioning of Primary drop insert MUX (PD 2 MUX) with all accessories. This also includes all power supply connections, surge and lightning protection arrangements, wiring inside the racks and indoor krone box, fitting of ladder, wiring up to Krone/CT box, connecting all pigtails, optical patch cords etc to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all E1s on DDF taking PVC cable over runway or a wall and termination of VF interface circuit to the Krone type.
3
18692
56077.23
... More
Installaltion, wiring, testing and commissioning of SMPS based, FR-FC-BC Battery Charger, for Telecom use including ultra isolation transformers. It also includes the cost of DC bus bar 3 of 48V DC/power wire and connection of power supply to the equipments with wire of suitable gauge as directed by site engineer including casing/capping. The work includes supply of battery rack, MCBs, battery cable and battery lugs and other accessories required for installation of power plant. All material required for commissioning to be arranged by contractor.
3
5571
16715.25
... More
Installation, testing and commissioning of 25 Watt VHF synthesised transreceiver set, 4 at Railway station, including all blacksmith and masonry work as per Railway Engineer at site. Required GI pipe shall be supplied by the contractor in size 6 mtr/1500 mm length, 50 mm/40 mm dia as per requirement at site.
3
4939
14818.62
... More
Installation of PA system at Railway station as per instructions of railway site engineer incharge. The required cable, conduit, Amplifier and equipment shall be supplied by Railways. Cable shall be laid in proper conduit.
3
5031
15094.77
... More
Installation, wiring, testing and commissioning of all UTS related equipments as per 6 Railway site incharge. It also includes configuration, programming and interfacing with the existing UTS network at way side station as well as at Router end. All connecting material connectors etc. to be supplied by contractor. Software programming to be done by OEM/OEM certified engineer.
3
59240
177720.63
... More
Installation of thermo shrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012 (Rev.3.0) with (Amdt.-1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer
15
1682
25243.05
... More
Splicing of 24 core optic fibre cable and making the splicing joint with contractor's own 8 machine and tools. Joint should be prepared in such a way that the top of the enclosure shopuld be at a depth of minimum 1.2 mtr and the enclosure should be covered with soft soil and bricks. Splice loss of each fibre should be less than 0.05 dB.
15
12011
180176.25
... More
Construction of OFC jointing pit of size 1mx1mx0.6m, using bricks, sand and cement in 9 the ratio 1:3. The thickness of the wall shall be 120 mm. The top cover shall be of concrete of thickness 75 mm with two iron handles on top of it. The pit shall be covered with sand after putting the joint enclosure. All construction material to be supplied by contractor.
15
6257
93864.75
... More
Writing work of cable termination details of 6-quad, OFC, PIJF cables & equirpments details at OFC Room/Cable hut & Station Building and wherever necessary as per direction of Engineer incharge.
3
2651
7954.53
... More
Blowing/drawing of OFC through HDPE duct and protective work already provided in the 11 excavated trench. All the equipments and machinery required shall be arranged by the contractor at his own cost. Cable should be laid according to the technical conditions & instructions of the site incharge.
40
17093
683722
... More
Preparation of final built cable route plan (6 QUAD and OFC cable) on Autocad for the section.This includes supply of necessary documents on tracing paper along CD (3 nos) with five prints of cable route plan, jointing locations, cable / OFC hut wiring diagram etc.
35
1567
54851.3
... More
Laying of UTP/STP CAT-6 cable/power cable in PVC casing capping of appropriate size. The work also includes supply and fixing of casing and capping, fixing and connection of patch panel, fixing of CAT-6 cable with RJ 45 connectors. Work to be done as per instructions of site incharge.
1000
45
45140
... More
Painting of telephone mark with indicating arrow, indicating the location of nearsest emergency socket on the hectometer post /OHE mast installed alongside the Railway Track. All materail including paint shall be supplied by contractor.
100
155
15527
... More
Fixing of EC socket assembly complete with termination of 6 quad, PIJF derivation cableon the strip of 6 pin EC socket box on a good qualtiy laminated board at SM/TSS/any building, where ever necessary as per instructions of site engineer at site. The work include metallic portion of the socket assembly using black enamel paint.
20
1163
23277
... More
Taking all type of cables inside station building.Relay room, OFC room, UTS/PRS room ,SSP/FP and location boxes etc and sealing of cable entry point as per instruction of side engineer and contractors own man power and material.
10
5380
53808.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%