North Central Railway Tender

A) Pre-fabricated Pump house and allied accessories - Supply & Installation of Out Door Fitting in all side of Container street light LED Type.(1x 18W) 4 ft long

A) Pre-fabricated Pump house and allied accessories - Supply & installation of Ceiling Fan 48 " With Regulator .

A) Pre-fabricated Pump house and allied accessories - Supply & Installation of Exhaust Fan 18".

A) Pre-fabricated Pump house and allied accessories - Supply and installation of 1.5 Ton Split Ac with Stabilizer. For Electrical Chamber./ Control Room.

A) Pre-fabricated Pump house and allied accessories - One Computer Table Two Chairs and one small Cup board.

A) Pre-fabricated Pump house and allied accessories - 1 No. MS Pipe line size 300 mm from Sump to container including fabrication

A) Pre-fabricated Pump house and allied accessories - Sluice Valve 1 no. for size 300mm along with fitting job

B) Pump and Allied Fittings - Pump and Allied Fittings

B) Pump and Allied Fittings - Common skid mounting for pump sets

B) Pump and Allied Fittings - Supply, Installation and testing of basket type in line strainer for pump sets.

B) Pump and Allied Fittings - Suction manifold with fittings and Fitment work

B) Pump and Allied Fittings - Delivery manifold with fittings and fitment work.

B) Pump and Allied Fittings - Butter Fly valve 200mm/150mm

B) Pump and Allied Fittings - Non Return valve 200mm/150mm

B) Pump and Allied Fittings - On Line Flow meter 200/150MB (Main Bore) with fittings 200/150mm

B) Pump and Allied Fittings - Electrical Operated valve 150MB (Main Bore) with fittings.

B) Pump and Allied Fittings - 1.5 Sq mm 6 core copper cable for control of electric valve

B) Pump and Allied Fittings - 1.5 Sq mm 6 core copper cable for control of flow meter.

B) Pump and Allied Fittings - Hydro pneumatic Tank.

B) Pump and Allied Fittings - Cable for pump to control panel 16sq mm 3.5 core including fittings

B) Pump and Allied Fittings - Power Cable of 95 Sq mm 3.5 core Aluminium along with lugs from DG Panel to LT change over and to main control panel.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Supply of MS Pipe of 200 mm dia duly painted with RAVOSOL Duly welded with flange to connect from Distribution Header to each hydrant line of Platform, separately Including handling and laying.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Excavation of Earth Parallel to Track size (600mm x 600mm x 250 mtrs) below from sleeper level including back filling and clearing the extra material from site

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Installation of MS pipe line of 200 mm including handling, laying as per site condition

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Set of rubber packing & Gasket for 200 mm

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - SITC of Bends of M. S. 200mm with Flanges, including positioning andwelding etc

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Supply of casing pipe size 400 mm M.S. Without flanges. "A" class fabricated 3.0 Mtr long duly painted with REVOSOL Paint. This is to be installed under the track for in casing ground.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Installation of casing pipe size 400mm MS including Digging under the track and back filling Soil and metal handling the same

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Execution of Road crossing RCC,PCC or Tar Road including cutting laying of pipe and backfilling and repairing.

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Cut and Connection in Sump

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Suction Pressure Transducer and Pressure Gauges with fittings

C) Feeding line M.S. with allied fittings and installation under the track and parallel to the track - Delivery Pressure Transducer and Pressure Gauges with fittings.

D) Electrical Control panels and other Items - Control Panel (inclusion of the following (i) to (ix)- (i) Design, fabrication, transportation, supply,erection and commissioning of LT cubical panel3 Phase and neutral 415V. 4 Wire, free standing floor mounted,LT panel made up of 14SWG CRCA (Cold Rolled Carbon Annealed) sheet after seven tank process and painting with EPOXY powder coating. The panel shall consist of suitable rating TPN (Triple pole neutral) tinned copper bus bar supported with DMC/AMC barriers and colour coded with heat shrinkable sleeves. The metering shall be provided as specified The panel shall have short circuit with standing capacity of minimum 50KA (RMS) power frequency test and consist of the switch gear as mentioned below. The panel shall be mounted on channels including supply and fixing as per specification. The complete work has to be 37 carried out by the contractor including masonry work. After execution, all the feeder cables have to be connected to new panels with suitable cable glands as per the requirement of Engineer at site. Air condition provision is to be made for entire control panel.The panel consists:- (ii) 1 No. of 400A, 4 Pole, 36KA,MCCB (Moulded case circuit breaker) & 400 AP changeover for incoming (iii) 4 No. of 100A, 10KA 4 Pole MCCB out going. (iv) 1 No. of 36A, 10KA 4 Pole MCB (Miniature circuit breaker) out going (v) 1 No. of 32 A,10KA 4 Pole MCB out going (vi) Along with multifunctional digital meter similar to model No: EM-VIFPE of M/s HPL make with suitable ratios CTs(Current transformer) along with the selector switches, LED phase indication pilot lamps (3No's), and tinned copper bus bar of 1000V along with rubber chequered sheets of size 1m length of panel of 12 mm thick as per IS 5424-1 No. complete (vii) Suitable set of capacitor 40KVAR with auto manual APF Relay. (viii) VFD (Variable frequency Drive) 1 No. PLC 1 No. HMI, with pressure treasures. (ix) Suitable 40 HP star delta starter with auto manual selection mode and same starter will work on VFD and command will be to VFD by PLC (Programmed Logic Control)

D) Electrical Control panels and other Items - Diesel Generator set silent 125KVA with required Civil Work making a PCC floor as per foundation Drawing of DG Set

D) Electrical Control panels and other Items - 2 KVA Industrial UPS with one hour battery backup with cables.

D) Electrical Control panels and other Items - Supply, erection and connecting of Maintenance free 40 earth by 17.2 mm dia low carbon steel rod coated with 205 microns thick copper 3 mtrs long with clamps and carbon based earth enhancing compound of LORESCO BACKFILL material not less than 40Kgs for each.Exothermic welding and earth connection by SWG GI wire of length up to 6mtrs for connecting the earth to equipment generally confirming to RDSO specification No. RDSO/PE/SPEC/0109/REV. O')-2008. The Earth equivalent to MCML/JEF Techno Solution Pvt.Ltd

D) Electrical Control panels and other Items - SCADA for 500, Data analysis including of PC, LED 41 32"". Keyboard, Printer and allied accessories for communication with various type of small cables to connect control pane to UPS, PC and other as per site requirement in Pump room & Control room. Various type of lugs, cable gland, Sims, terminals etc.

E) Hydrant Pipe line and Allied work - Fabrication items like spool/tee/distance pieces etc as per site condition.

E) Hydrant Pipe line and Allied work - Supply & fixing of G.I 150 mm dia & fabrication of pipes. The pipes should be fixed with bellow expansion joints to compensate for shrinkage & Expansion due to weather conditions.

E) Hydrant Pipe line and Allied work - Supply & fixing of MS coupling size 25 mm with threading to connect the GI nipple 25mm

E) Hydrant Pipe line and Allied work - Making hole in GI Hydrant pipe line every two meterand fixing the MS coupling 1"" dia with welding

E) Hydrant Pipe line and Allied work - Supply & fixing of MS Bends 90 degree 150 mm dia pipe.

E) Hydrant Pipe line and Allied work - Providing of G.I./ MS flange for B class 150mm dia pipe

E) Hydrant Pipe line and Allied work - Supply & fixing of 50 mm Air valves along with the fittings

E) Hydrant Pipe line and Allied work - Supply & fixing of G.I. /M.S. Plate (300 x 150 x 8) mm over Support pole along with the clamp 2 Nos and nuts duly making 8 holes on both the end with arrangement to hold and keep end of flexible hose pipe clean and safe.

E) Hydrant Pipe line and Allied work - "Supply and bending work to required shape M.S. G.I. pipe of 25mm dia B class of 1.5 mtrs length 9 (1090 hydrants x 1.5m) supply and fixing of mounting plate, clamp & patti. "

E) Hydrant Pipe line and Allied work - Supply and fixing of galvanized M.S. steel 10 nipple of 25mm dia 50mm long ""B"" class both ends threading.

E) Hydrant Pipe line and Allied work - Supply and fixing of galvanized M.S. Steel nipple of 25mm jet nipple 11 length 100mm. Long "B" class end threading and one end jet threading.

E) Hydrant Pipe line and Allied work - Supply and fitting of SS304 PTFE seat 25mm dia brass Ball valve KOR valve India(P) ltd, or TBS Engineers (P) Ltd or 12 similar make with IS 9001-2000 certificate or ISI standard single PC designing Ball valve SS 304.

F) Painting of hydrant lines and installation of poles - Painting of main hydrant pipeline including all fittings including rail post and fixtures with two coats of Anti corrosive primer followed by two coats of synthetic enamel paint of colour as per IS 2379-1990 or latest.

F) Painting of hydrant lines and installation of poles - Taking out 100 mm dia existing water pipe line includes dismantling of existing hydrant pipe line from rail post and handing over to store, carriage of material to store provided by Railway representative

F) Painting of hydrant lines and installation of poles - Taking out 150 mm dia PPR pipeline from existing base for fitting it on pillar support.

F) Painting of hydrant lines and installation of poles - MS fabricated 125mm ISMB pole having total length 2300 mm above rail level and 600mm below ground level fitted with 200mm x 200mm MS plate at bottom 57 and 02 angles of 40mm x 4mm (250mm long) for grouting. Job should include excavation of 600mm x 600mm x 600mm and concreting of M20 grade with shuttering including all cement, steel, centering, shuttering and excavation in between two tracks, removal of ballast near the track and dressing again, arrangement to hold and keep end of flexible hose pipe clean and safe, brackets for holding the 150mm pipe and water hydrant.

F) Painting of hydrant lines and installation of poles - Normex foot valve ball Type Size 200 mm