North Central Railway Tender

Supply of Flexible pipe (1.5" ).

Supply of Meter box.

Implementation of vending system, Data base defining/mapping of consumer & running the vending system for initially two days, Training to system operators ( per order in phases) along with user manual,per consumer one time.

Vending charges for 225 nos. meter for 5 years operation.

Telephone cable laying to connect meter to parallel Home display unit for remote access of data/operation home along with both side RJ-11 connecting punching.

Installation of pre payment Keypad based BIS marked Digital energy meter with box.

Supply, erection, testing and commissioning of 3 phase outdoor & double door type LT distribution panel comprising 2 nos. 400 Amps FP MCCB as incoming with 1 no. 400 Amps automatic transfer switch (with auto, manual and bypass arrangements) and 6 nos. 125 Amps FP MCCB, 4 nos. 63 Amps FP MCCB, 04 nos. 32 Amps DP MCB and 4 nos. 16 Amps DP MCB as outgoing with 4 nos. copper bus-bars of size 50 x 5 mm, RYB indicator, digital multifunctioning Energy meter (KWH, Volt, Amp), selector switches, indicator lamps (LED type) with cable alley chamber and other associated accessories complete with cable termination by cable gland, lug, nut bolt etc. All internal wiring in the panels shall be carried out using FRLSH wires. The MCCB shall be adjustable type having ground fault module with (Ics = 100% Icu) and breaking capacity of MCCBs shall be 50 KA 10 for 400 A & 250 A MCCBs, 35 KA for 125 A & 63 A MCCB and 10 KA for MCB. The enclosure of LT panel shall be fabricated of 12 SWG CRCA sheet, weatherproof powder coated type with other accessories. The panel board shall be wall mounted / CC flooring with MS stand made of MS angle of size 50 mm x 50 mm x 6 mm and skeleton type angle structures with holes for cable entry & exit as per site condition. The angle structure of panel should be covered with M.S. Sheet and duly painted. The panel board shall be properly earthed as per IS. The successful tenderer shall be required to submit circuit diagram and block diagram for the panel board and start fabrication after approval of the same by Sr.DEE (G)'s office. The LT panel shall be designed manufactured and all type tested in accordance with the latest relevant IEC (viz. IEC 61439 1-6, 60947-2, 60898-1 2002 or latest) standards. The contractor shall submit original test report from CPRI / ERDA / Any other equivalent Govt. Testing Agencies.

Supply, Erection, Testing and Commissioning of LT Panel Board fabricated floor mounted made of MS sheet 14 SWG complete floor mounted front operated, mounted on MS channel 75x40x3 mm. painting by one coat of red oxide primer with two coats of approved synthetic enamel paint complete with top/bottom removable gland as required double compression type cable glands earth bus, hinged and lockable doors , dust and vermin 11 proof complete with all inter connections by PVC insulated multistranded copper wire with suitable capacity Bus Bar for Consisting of the following Items. MCCB - FP - 50 KA -250Amp. = 01 No. for incoming side MCCB - FP - 50 KA - 125Amp. = 04 Nos. for out going side C) CT- 300/5-03 Nos operated with three phase panel mounted electronic energy meter, Digital Type volt meter size 96 X 96 mm.with selector switch & 03 Nos. LED indicator Note- main distribution Board shall be mounted on masonry post at least 2 feet in height from ground level to avoid submerging in rains.

Dismantling & Removal of LT, Existing Rail/Tubular pole and refilling the same with excavated earth and finishing the surface in its original condition after removal the existing Rail/Tubular pole handed over to concerned SSE/G store

Supply, installation and commissioning of LT XLPE insulated aerial bunched cable with Termination and connection having associated given accessories. LT XLPE insulated aerial bunched cable with bare messenger as per IS:14255-1995 up to the latest amendments of sizes (3x120+1x70+1x16) sqmm

Supply, installation and commissioning of LT XLPE insulated aerial bunched cable with Termination and connection having associated given accessories. LT XLPE insulated aerial bunched cable with bare messenger as per IS:14255-1995 up to the latest amendments of sizes (3x95+1x70+1x16) sqmm.

Supply, installation and commissioning of LT XLPE insulated aerial bunched cable with Termination 15 and connection having associated given accessories. LT XLPE insulated aerial bunched cable with bare Metre 6500 237.00 1540500.00 messenger as per IS:14255-1995 up to the latest amendments of sizes (3x70+1x50+1x16) sqmm.

Supply, Installation and commissioning of LT XLPE insulated aerial bunched cable with Termination and connection having associated given accessories. LT XLPE insulated aerial bunched cable with bare messenger as per IS:14255-1995 up to the latest amendments of sizes (3x50+1x35+1x16) sqmm.

Supply, installation and commissioning of LT Shackle Insulator with nut and bolt.

Supply, installation and commissioning of Shackle Strip 12''.

Supply, installation and commissioning of I-Hook.

Supply, installation and commissioning of Dead End clamp

Supply, installation and commissioning of Suspension Clamp.

Supply, installation and commissioning of Piercing Connector 90/120 sqmm.

Supply, installation and commissioning of Distribution boxes with accessories.

Dismantling of existing old overhead line of 3/5 wires in each span from rail poles along with brackets, cross arms, insulators and other accessories and depositing to stores.